Raw Materials for Refractory:Plastic Grade Mica Refractory Powder
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 600 m.t.
- Supply Capability:
- 7000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Details: 8~20 mesh is mainly used for building materials, playing an important part in water-proof, fire-proof, heat preservation, heat insulation and decoration. 40~60 mesh is well used for filler to improve the product usability. 60~120 mesh is available for paint admixture, filler, covering agent and rubber lubricant, plastic filler. Moreover, it is also the basic materials of mica ceramics. 200~325 mesh is widely used for pearl pigment. |
1. Chemical index
SiO2 | Al2O3 | K2O | Na2O | MgO | CaO | TiO2 | Fe2O3 | PH |
44.5~46.5% | 32~34% | 0.6~0.7% | 0.53~0.81% | 0.4~0.6% | 0.8~0.9% | 3.8~4.5% | 7.8 |
2. Physical index
Heat resistance | color | Mohs hardness | elastic coefficient | transparency | Melting point | disruptive strength | purity |
650 | silver white | 2.5 | 1475.9~2092.7×106Pa | 71.7~87.5% | 1250 | 146.5KV/mm | >99% |
Mica powder can be used in paint and coating to reduce the damage of ultraviolet rays or other Light and heat damage to the paint film, promote coating acid and alkali. and insulation, and to t= strengthen its durability , freezing resistance corrosion resistance, water resistance etc. it helps to strengthen the adherence to the layer, improve its intensity, brightness, tenacity and Compaction. As a result ,it is conducive to reduce the ventilation ,to prevent speckle and chaps as well as reduce sediment in the paint. As a prior filler in paint, mica powder can be used to substitutesome expensive raw materials in the paint so as to reduce the production cost.
Mica powder is also the basic raw material for mica ceramicsproducts.
Mica powder can be applied in protecting layer of welding rods, conducting wires and electric cables.
It can be use as suspended substance in fire-fighting dry powder.
- Q: How is grade of fire endurance divided?
- Fire resisting shutter is divided into Class A / B / C, and the relevant fire endurance are not less than 1.2 /0.9 /0.6 hours, see "General technical conditions for steel fire resisting shutter GB 14102-93". 4.3 4.3.1 Classification according to time of fire resistance 4.3.1 Ordinary steel fire resisting shutter (see Table 3) Table 3 and Category Code Refractory time hF1 1.5F2 2.04.3.2 Composite steel fire resisting shutter (see Table 4). Table 4 and Category Code Refractory time hF3 2.5F4 3.04.4 Classification according to refractory time and smoke prevention performance 4.4.1 Ordinary steel fire and smoke resisting shutter (see Table 5) Table 5 category and code refractory time h smoke leakage (20Pa differential pressure) FY1 1.5 ≤0.2m3 / m minFY2 2.0 ≤0.2m3 / m min4.4.2 composite steel fire and smoke resisting shutter (see table 6) table 6 category and code refractory time h smoke leakage (20Pa pressure) FY3 2.5 ≤0.2m3 / m minFY4 3.0 ≤0.2m3 / m min Excerpt completed. Fire shutter used as fire compartment has a fire resistance of 3 hours, and fire shutter set on the upper opening part on the firewall has a fire resistance of 1.2 hours. **** Materials with fire resistance of 3.0 hours are called AAA refractory material (back fire surface). "Building Conventions" have mentioned in places where it is really difficult to set a firewall, fire shutters can be used to separate fire compratment. When using fire shutters whose back surface temperature rise is included as the judging criteria of fire resistance, its fire resistance should be not less than 3.00h; When using fire shutters whose back surface temperature rise is not included as the judging criteria of fire resistance, independent protection of closed automatic water spraying system should be set on the both sides of the shutter, and the duration of water spray should be not less than 3.00h. In summary: Fire shutter is divided into: Grade AAA, A, B and C
- Q: Which industry does refractory belong to? Does it belong to construction industry?
- I do not recognize all the answers. No matter what kind of refractory can be used in construction. Biulding syove or kiln is construction. So personally, it belongs to construction indusrty.
- Q: Who knows what is the external wall thermal insulation materials for level A fireproofing?
- In general, external wall thermal insulation materials can be divided into level A and level B by combustion grading. Level A is non-combustible material, and level B is combustible materials. A few years ago, the fire of the CCTV Building and Shenyang Hotel put the blame on the level B material. At present, the level A material is widely used, and the prices of same level A materials may be even cheaper than the level B material. Level A material is generally divided into thermal?mortar, phenolic foam board, rock wool board and foam cement board. I hope this information can be helpful to you. Hope you adopt.
- Q: What are the refractory materials above 1000℃
- I have no idea what field you are in, and I am skillful at making refractory materials, because this is my job. You can send me an email informing your purpose, here is my email address .
- Q: who knows the requirements of refractory for forge furnace?
- Here is the requirements of refractory for forge furnace: according to the chemical properties,casting fireproof materials are divided into three major categories: acidic, neutral and alkaline refractory materials. alkaline and neutral refractory materials are commonly used, such as alkaline magnesia-carbon bricks and burned magnesite bricks, magnesite-chrome bricks, magnesium-calcium brick, neutral high alumina brick, corundum brick, clay brick, etc., shapelessness materials include: castable refractory, ramming?mass, gunning mix, coating, dry vibrating materials and so on! Hope my answer can help you.
- Q: What's the classification of flameproof glass, the refractory time of fireproofing glass.
- who knows the classification of fireproofing glasses, how long is the fire-resistant time?
- Q: what should be paid sttention when buying the refractory?
- First, look at the appearance of the product, it will be better if the surface of product is smooth, if there are the injuries and damages which may influence the use, do not use it. Second, the main characteristics of insulation material is flame resistance, reduce the loss of fire occurred at the time of purchase combustion performance testing products, non-combustible stone wool products are the best. Third, refractory insulation with good hygroscopicity is also very important, it can keep your room drying for a long time , played the role of moisture-proof, and more capillary, the hygroscopicity is better.
- Q: Graphite and other carbon materials may be oxidized to CO or CO2 at high temperatures. But why can they be refractories?
- There is no contradiction for this. Any substance can be combustible, but different materials have different ignition points.There are many types of graphite. Pyrolytic graphite has a much lower ignition point. Therefore, as long as it reaches at a certain temperature, it can convert into graphite. Mostly, in practical applications (such as brake pads will add a certain amount of graphite), graphite is required to have refractoriness of below 1000 ℃. Graphite can serves as both the combustible and refractory material. So, it can be used as a fire-resistant and high-temperature-resisrant material because graphite (lamellar graphite) has a ignition point of at least 3000 degrees in an oxygen free condition. The above information is for reference only and is offered by Xin Ruida Graphite Company.
- Q: For refractory, why is it necessary to store the first mixing materials for some time under proper moisture and temperature?
- It is mainly to remove gas form chemical reactions in the pug, give full play to plasticity and binding properties of combined, and store unburned?brick whose cememting agent is phosphoric?acid or aluminium?phosphate for some time under proper moisture and temperature. For example, to avoid the formed bricks in the initial stage of drying and firing form cracking due to hydration of calcium oxide. Mixing materials is to store the first mixing materials for some time under proper moisture and temperature in order to improve the evenness and moldability of pud, such as making the distribution of combined clay and water more even. The length of storing chiefly depends on the process requirements and the characteristics of blanks. For the producing pug of high temperature kiln furnitures, the storing time is longer. The function of storing mxing materials varies with different natures of blanks. For honeycomb ceramics, it is to fully digest calcium oxide in blanks. For storing magnesia brick blanks containing much calcium oxide, it should be stored for some time in proper humidity and temperature.
- Q: What is the limit of fireproof rolling shutter?
- Fireproof rolling shutter door is a kind of fire protection and heat insulation facility which is suitable for the large openings of buildings, having a certain effect on the design and installation. Fire shutter doors are widely used in fire partition of industrial and civil building. It can effectively prevent the spread of fire, to protect the safety of life and property. It is an indispensable modern building fire facilities. According to the national standard 14102-2005 GB standard, the provisions of 14102-2005 GB specify that: If fire resistance limit of fire resisting shutter is no less than 3 hours, it is AAA fireproof rolling shutter. Therefore, the fire resistance limit of AAA grade fireproof rolling shutter should be 3 hours.
Send your message to us
Raw Materials for Refractory:Plastic Grade Mica Refractory Powder
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 600 m.t.
- Supply Capability:
- 7000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords