PE or PP perforated release film high quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Material:PE
Type:Release Film
Usage:vacuum forming releasing
Feature:Moisture Proof
Hardness:Soft
Processing Type:Blow Molding
Transparency:TRANSLUCENT
Place of Origin:Shanghai, China
Brand Name:TOBS
Model Number:micro perforated release film
Thickness:30μ,50μ
material:PE/PP
pore diameter:0.8mm ±0.2mm
pitch:8mm±0.1mm
Working temperature:125 ℃/150℃
Tensile strength:>25MPa
Elongation:>200%
Width:≤1.5m ±2mm
length:ccording to the request
Product name:release film
1,Description
Perforated Realease Film contacts with laminate directly, separating laminate and peel ply which has no release property.
2,Properties of products
Items | Description | Properties |
1 | material | PE/PP |
2 | pore diameter | 0.8mm ±0.2mm |
3 | pitch | 8mm±0.1mm |
4 | Thickness | 30μ, 50μ |
5 | Max. working temperature | 125 ℃/150 ℃ |
6 | Tensile strength | >25MPa |
7 | Elongation | >200% |
8 | Width | ≤1.5m ±2mm |
9 | length | According to the request |
- Q: Does it matter if the protecive film on the cooling fin of air conditioning is washed off?
- If the film is coated on the surface, that's hydrophilic film, used to strengthen the refrigerating effect. If it's removed when it should not be removed, then it will affect the refrigerating effect of the air conditioning. If there's a liite part of the film is washed off, it doesn't matter. But the fin is put closely to each other. You should remove the film one by one. Is the fin put closely to each other?
- Q: Mobile phone screen film stuck on how bubbles ah, how sticky ah?
- There are two reasons for cell phone film bubbles. One is the air: just use a bus card or something like that to push the bubbles out of the edge. The two is stained with dust: a film bubble, with transparent adhesive, the dust sucked again after the stick, and in order to avoid the air can also use the bus card push, until the paste is smooth and has no bubbles so far.
- Q: Can laptop TouchPad be covered with protective film?
- You needn't do that. When the touchpad is coated, the sensitivity is weakened and the feel is affected. You know that touchpad is made to touch. . . If it's necessary, the manufacturer would have done it for you.
- Q: How to easily remove the protective films on ceramic tiles?
- Sprinkle some industrial alcohol on the floor and wipe the floor with a rag three minutes later. It's easy and fast this way.
- Q: After the camera is attached, some bubbles want to be replaced with another one. How can you pull it out? It's urgent. Can you stick it in a little water? Oh, that's tough
- The film itself has a vent, in between the film and the camera screen space from the clean, the film will cling to the screen, to separate words, must make between the two is filled into the space, can use the nail pick a corner, then slowly is too high, this space will be along the slot into the space, you can tear down.
- Q: How to solve the crystal point on the PE protection film?
- 3, processing conditions, improper processing temperature will lead to poor plasticizing or plasticizing of raw materials, will cause crystal point phenomenon.4, equipment processing capacity, equipment, cartridge, screw, filter and so on, the crystallization of the point also has a very important impact.
- Q: How to change the screen of mobile phone screen?.
- Mobile phone screen protector replacement procedure:1, tear off the original protective film, blowing the dust around the phone.2, use the lens pen soft hair brush to larger dust.3, using the lens cleaning cloth to wipe the tiny dust, note that the lens cleaning cloth gently wipe from left to right three times, do not rub back and forth, so easy to move around in the dust, or the results of the screen.
- Q: What kind of protective film is suitable for stoving varnished product?
- Stoving varnish is a kind of high-light product. It can be covered with static film of low adhesion. We have specific protective films for specific stoving varnished, high-light and plastic products.
- Q: What kind of glue is used in PE protective film ?
- Generally, it's acrylate PSA. Sometimes rubber is also used. But the former is slightly cheaper.
- Q: What harm can the protective film on bottled water do?
- It's not harmful. It's separated from the water bottle. And there are national security standards to keep it under control.
Send your message to us
PE or PP perforated release film high quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
