Non Exposure Homogenous PVC Membrane for Roofing with Backing 1.5mm
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 Square Meter m²
- Supply Capability:
- 200000 Square Meters per Week m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Non Exposure Homogenous PVC Membrane
Service life of 20 years for exposed use;
High puncture and rooting resistance, especially suitable for planting roof system;
Introduction of Non Exposure Homogenous PVC Membrane
It is a new polymer waterproof membrane which is made from polyvinyl chloride resin, and mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries. Hongyuan adopts automatic mixing of raw material, double-screw extruder and delicate three-roller calender equipment in the PVC membrane production. berry PVC waterproof membrane features dimensional stability and high tensile strength, being a best choice for many civil and industrial projects.Berry PVC waterproof membrane mainly falls into two categories: Homogeneous & Reinforced, each with different thickness specifications. Reinforced PVC waterproof membrane employs a fabric reinforced layer in the middle, it enhances the breaking and tear strength.
Features of Non Exposure Homogenous PVC Membrane
- Excellent performance in aging resistance, service life of 20 years for exposed use, and 50 years for non-exposed application
- High puncture and rooting resistance, especially suitable for planting roof system
- Easy installation and hot-air welding seam, environment friendly
- High tensile strength and elongation, size stability
- Good plasticity, convenient for detailing and coners installation
- Inherently fire resistant
- Smooth surface, unfading and stain resistance
ASTM Standard D-4434/D-4434M ASTM Standard for PVC Sheet Roofing | ||||
No. |
Item |
Specification | ||
Type II |
Type III |
Type IV | ||
1 |
Overall thickness of PVC sheet, min, mm (in.) |
1.14 (0.045) |
1.14 (0.045) |
0.91 (0.036) |
2 |
Thickness over scrim, min. mm (in.)A |
0.40 (0.016) |
0.40 (0.016) |
0.40 (0.016) |
3
|
Tensile strength at break, min, MPa (psi): | |||
Machine direction |
10.3 (1500) |
... |
... | |
Cross-machine direction |
10.4 (1500) |
... |
... | |
4 |
Breaking strength, min, kN/m (lbf/in.) |
... |
35 (200) |
48 (275) |
5
|
Elongation at break, min, % | |||
Machine direction |
250 |
15B |
25B | |
Cross-machine direction |
220 |
15B |
25B | |
6 |
Seam strength, min, % of tensile or breaking strength |
75 |
75 |
75 |
7
|
Retention of properties after heat aging | |||
Tensile strength, min, % of original |
90 |
... |
... | |
Breaking strength, min, % of original |
... |
90 |
90 | |
Elongation, min, % of original |
90 |
90 |
90 | |
8 |
Tear resistance, min, N (lbf) |
45.0 (10.0) |
... |
... |
9 |
Tearing strength, min, N (lbf) |
... |
200 (45.0) |
400 (90.0) |
10 |
Low temperature bend |
pass |
pass |
pass |
11 |
Accelerated weathering test | |||
Cracking (73 magnification) |
none |
none |
none | |
Crazing (73 magnification) |
none |
none |
none | |
12 |
Linear dimensional change, max, % |
0.1 |
0.5 |
0.5 |
13 |
Change in weight after immersion in water, max, % |
±3.0 |
±3.0 |
±3.0 |
14 |
Static Puncture Resistance |
pass |
pass |
pass |
15 |
Dynamic Puncture Resistance |
passC |
passC |
passC |
- Q: Shower structure
- First, the shower room has tempered glass, pulley or hinge, fixed connector or bracket, roof cover and the base (simple type does not) and other parts of the composition! So by the function of the whole shower and simple shower room; The shape of the shape of the chassis, square, fan-shaped, diamond-shaped shower room, etc .; by the door structure of the sliding door, folding door, the door of the shower, Flat open the door shower room and so on. Second, the overall shower room features more, the price is higher, generally can not be customized. Compared with the whole shower room, the simple shower room is not "roof", rich style, its basic structure is the bottom basin or artificial stone bottom or natural stone bottom, bottom basin texture of ceramics, acrylic, artificial stone, Bottom basin to install plastic or tempered glass shower room, tempered glass doors are ordinary tempered glass, high quality tempered glass, water riveting glass and cloth pattern tempered glass and other materials. Third, some shower room with sandblasting gold or sandblasting silver process, the color of luxury. But usually, the number of users who make transparent glass is still the largest number, because the tempered glass surface if you do other treatment, will reduce the glass quality level. In order to reduce the rejection rate, usually the steel plant in the steel can not be all steel, but the use of semi-steel processing, which increases the user's use of the risk.
- Q: Does anyone know how to compare the shower room?
- Comparison, design and quality, in both these are better, Rose Island is very good.
- Q: 1, I have 18 shower room, with the floor, intended to use three 16L gas water heater, separate equipment, one by one 6 shower. This will not be cold or hot, not even hot water? 2, if the heating speed hot water heater, the price higher, there is no other way?
- Shower water to be 5 to 8 liters per minute. 16L take 6 shower too small. At the same time, the water temperature of the gas water heater (including other hot water heaters) is usually related to the size of the water, and the multiple showers will certainly affect the water temperature. Multiple showers are hot water, preferably hot water tanks.
- Q: Shower room is how the tender, I need a template Oh, that kind of people to give you Oh
- The preparation of tender documents should be prepared in strict accordance with the requirements of the tender documents, in fact, very well prepared tender documents, carefully read the tender documents, in accordance with the requirements of the tender documents and format to fill your company's own things just fine.
- Q: What is the size of the bathroom from the shower room and the outlet?
- No specific provisions of it, taking into account the need to install the leak, generally about 20CM.
- Q: What is the best light? What is the light? 4 square best installed what light?
- Is the shower room installed in the bathroom? The bathroom is generally Yuba or moisture-proof and moisture-proof ceiling. Do not pretend that it is not moisture-proof anti-fog anti-fog. 4 square on Yuba ah!
- Q: How to see the shower room is good or bad, than the average bathroom difference and good or bad.
- Note 1: The bathroom area determines the shower room shape The shape of the shower room is generally symmetrical arc fan, and square, diamond-shaped, etc., there are sliding doors, folding doors, shaft doors, etc., to enter the way into the corner into the single or into the type, Is to expand the use rate, you can make better use of limited bathroom area, is the application of more styles, buy the shape of the shower room to refer to the size and direction of the bathroom.
- Q: When buying a shower room, the hardware handle, chute or not to calculate the other
- The complete shower room includes a variety of accessories. But some products can provide a variety of accessories to choose from, then the annex and the subject will be separately priced. For example, if the handle with stainless steel, copper, gold plating a variety of options, the price is certainly different, only another operator. As long as the time to buy clearly, when considering the total price, you can.
- Q: Can the washing machine be placed next to the shower room (partition)?
- Of course you can, mainly to see the space enough, my home washing machine directly to the balcony.
1. Manufacturer Overview
Location | Shandong, China |
Year Established | 2010 |
Annual Output Value | |
Main Markets | North America South America Southeast Asia Oceania Mid East Western Europe South Asia Domestic Market |
Company Certifications | ISO 9001:2008 CE |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | QINGDAO,TIANJIN,SHANGHAI |
Export Percentage | 51% - 60% |
No.of Employees in Trade Department | 6-10 People |
Language Spoken: | English, Chinese, Japanese |
b) Factory Information | |
Factory Size: | above 2000 square meters |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Non Exposure Homogenous PVC Membrane for Roofing with Backing 1.5mm
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 Square Meter m²
- Supply Capability:
- 200000 Square Meters per Week m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches