Multi-Head Multi-Row Boring Machine MZB73216
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1pcs pc
- Supply Capability:
- 1000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Multi-Head Multi-Row Boring Machine MZB73216
1. Patented product, the very 1st creation in china.
2. Automatic loading, feeding, drilling unloading and pilling up working pieces.
3. Not only worked by single unit with automatic loading and unloading, but also linkage with other drilling machines drilling the side, top and bottom holes in one shot.
4. High efficiency: Process 13 pieces of board per minute by connective drilling.
5. Ease labor intensity: Loading and unloading automatically
Technical Parameters of Multi-Head Multi-Row Boring Machine MZB73216
1. Automatic loading and unloading standard height 640mm (custom-made needed for higher than 640mm)
2. Automatic loading and unloading maximum width 800mm
3. Automatic loading and unloading maximum length 2500mm
4. Automatic loading and unloading minimum width 160mm
5. Automatic loading and unloading minimum length 200mm
6. Process 13 pieces of board per minute for automatic loading, feeding, drilling and unloading.
Order Mode
1. Single machine (top-drilling and top-bottom drilling) with automatic loading and unloading device.
2. Linkage multiple machines with automatic loading and unloading device.
3. The number of drill rows, for example: 2 rows on the side, 4 rows on bottom and 4 rows on top.
Characteristic of Multi-Head Multi-Row Boring Machine MZB73216
1. Removable vertical drill rows, precision Italian gear and rack transmission, and Germany positioning digital display with "clear" and "reset" function.
2. Angular air lock of vertical drill rows, convenient and efficient.
3. German linear guides, Taiwanese drill rows.
4. Adjustment vertical drill rows drilling stroke (declining height), better efficiency.
5. Buffered function of the drill rows feeding avoided materials bulging out while at blind hole drilling.
Specification of Multi-Head Multi-Row Boring Machine MZB73216
Model | MZB73216 |
Max. Drilling Dia. | 15mm |
Max. Vertical Drilling Depth | 55mm |
Max. Horizontal Drilling Depth | 40mm |
Minimum distance between two centre of vertical drill rows | 170mm |
Number of Spindles | 130 |
Max. Working Length | 2500mm |
Min. Working Length | 240mm |
Distance Between Two Spindles | 32mm |
Spindle Speed | 2840r/min |
Feeding Speed | 60m/min |
Total Power | 12.54kw |
Air Consumption | 6mpa/㎡ |
Net Weight | 1970kg |
Overall Dimensions | 4400x1700x1600mm |
Packing for Multi-Head Multi-Row Boring Machine MZB73216
- Q: Do you have a specific answer?
- What is the main structure of the drilling machine?There are many kinds of drilling machines, such as drilling machines for wall holes, drilling machines for drilling, drilling machines used in engineering teams, and drilling machines used in factories. I don't know what kind of drilling machine you're talking about.
- Q: What is boring machine hole?
- The drill head is pointed, in the actual drilling process, because the drill has just begun to be greatly affected by the force of the workpiece, prone to deviation, resulting in drilling hole error is large, and can not meet the design requirements tolerance range requirements. The drilling machine hole is to drill holes in the center of the location, first hit a small hole (or groove), is the drill head can drill down the hole, to ensure that the drill bit around the force evenly, reducing deviation.
- Q: Automatic drilling can not drill holes with a diameter of 1mm
- Yes, the minimum diameter of the auger bored pile is 310 mm;Remark: the diameter of rotary bored pile is different from 310~870 mm, and the diameter is 500, 600 and 700 millimeters. The length of pile is determined according to the resistance of pile end, the characteristic value of pile side resistance, the thickness force of soil layer and the diameter of pile!
- Q: What brand does the PCB drilling machine have in Germany?
- KLING HITACHI Hitachi ELMBERG drilling machine, drilling machine, PlUVITEC drilling machine, SCHMOLL drilling machine, POSOLAX drilling machine, PCB drilling machine:Import: GIGA, maniya, maggic, Paul LinSpecial servo motor maintenance for drilling machineDongguan professional import servo motor maintenance, photoelectric / rotary encoder maintenance, chip wear, rupture and scrap technical transformation!No limits, no boundaries! Such as Yaskawa, SANYO, Fanaco, SIEMENS, Tamagawa, LAFERT, CT, SEM, LentzThe most professional and trusted servo motor repair terminal service provider in china!Rapid repair 1-3 days, technical hotline Dongguan 134 deep, 3459 machines, 8434 electricity Mo workersWelcome to peer advisory business friends, business introduction has CommissionChoose the benefits of our maintenance:1. repair time is fast.2., repair quality is good, the use of stability, no rework phenomenon.3., a large number of maintenance cases, praised by the factory / company.4, long-term contract maintenance, life-long maintenanceNote: only imported servo motors and encoders are maintained, and the server and board are not repaired
- Q: How many holes are drilled on the road with a drilling machine?
- To speed up drainage.
- Q: Is it a technique to drive a PCB drilling machine?
- Yes, the PCB drilling machine needs to be programmed PIN to operate, so a calculation technique, the specific operation process is PIN, drilling and inspection, as follows:1, drilling operations, in addition to drilling blind holes, or very high level plate, hole precision requirements are very strict, with a single drill outside, usually with multiple drilling, which means each stack two or more, as for a few pieces of a drill:Board requirements accuracyMinimum apertureTotal thicknessTotal copper layer number,2, from the above aspects, because of a drill, so the drill before every board to pin will be fixed by this action on PIN (pinning maching) executive, double sided board is very simple, with half side, punched a PIN continuous action once completed, if it is a multilayer board more complex, the other should be special multilayer PIN machine operation.
- Q: PCB how much is the drill confidential?
- Look, what do you do for the board?If you do simple. Ordinary, buy Dongtai.Schmoll 160 thousand turn is enough, -100 million / TaiwanIf the higher order. Difficult, buy Hitachi.Posulx 200 thousand to the most suitable -130 million -150 million / TaiwanAt present, the highest evaluations are HITACHI and POSULX, fast and accurate!
- Q: Drilling procedure of drilling machine
- The operation steps of drilling are similar: first of all on board, transfer files, find the knife, with a knife, adjustable, adjustable foot drill set parameters, disk, drilling, but according to the drilling machine is different. The following are the general procedures for your reference:1, according to the size of the processing, the number of processing holes, the size of the processing hole, processing hole location data, make fixed fixture. Fasten the clamp and the automatic turntable.2. Set the processing data in the control computer.3. The material to be machined is fixed on the automatic turntable.4, start the machine, the machine according to computer instructions and processing data, one-time completion of drilling, drilling, milling hole, through hole, blind hole, porous, high and low holes and other processing procedures.5, the completion of a hole, the automatic drilling disk will be set according to the program to rotate a certain angle, the next processing hole position on the processing head, re start processing. Once the whole turntable has been processed, a processing flow will be completed. Remove the processed material. Reload.6. During the process, the machine will alarm immediately, and stop working and wait for processing. In the process of machining, when the cutting tool head is not sharp, the machine will alarm immediately and notify the replacement tool.Attention: always keep the body and the machine clean.
- Q: How to remove the expansion plug of the fixed base after the concrete drilling machine is drilled?
- Take the silk cap off first, use a small hammer to smash the screw pole, and then use pliers to clamp the expansion bolt and turn outward.
- Q: In the current market, the domestic PCB CNC drilling machine, there are those brands using the German CNC84 system in Chinese and English conversion?
- Like CPU in the IT industry, CNC systems are key factors in determining the performance, function, and reliability of CNC machines and CNC equipment. Over the years, as the basis of our hardware and software research and development is weak, less technology accumulation, R & D team strength is weak, inadequate investment in research and development, the gap with foreign in performance and function of domestic CNC system greatly. With the development of domestic CNC system early because of the quality of performance problems gave users leave doubts, resulting in high-grade CNC system our annual production accounted for only 1.5% years, the amount of purchase, a large number of high performance CNC system is still dependent on imports. In recent years, the performance, function and reliability of domestic CNC system have been greatly improved, and the gap with foreign countries has been shrinking. From the technical point of view, the domestic CNC system has basically met the domestic production of CNC machine tools technical requirements, the domestic high-end CNC system has also achieved a zero breakthrough. However, technological breakthroughs are not equal to breakthroughs in the market. Especially in the CNC system is toward intelligent, open, network oriented development today, Japan FANUC and SIEMENS of Germany and other international manufacturers of CNC system can realize multi axis, multi channel, high speed and high precision cutting and composite machining CNC system has been popular in the market, while China's CNC system the industry is still unable to eliminate domestic users of domestic CNC system reliability concerns. The face has experienced decades of development, MITSUBISHI, FANUC, SIEMENS NUM, FAGO and other foreign manufacturers monopoly, containment, the national development and Reform Commission from the policy support for domestic CNC system enterprises see the breakout of dawn.
1. Manufacturer Overview
| Location | Foshan, China |
| Year Established | 1994 |
| Annual Output Value | Above US$ 500 Million |
| Main Markets | South America; North America; Africa; Middle East; Russia; Ukraine; Egypt; Asia; Italy; Israel; Uganda; Pakistan; Tunisia; Australia; Southeast Countries |
| Company Certifications | ISO9001：2000; CE；CQC |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Rongqi; Beijiao; Huangpu; Shenzhen |
| Export Percentage | 90% |
| No.of Employees in Trade Department | 1000 - 2000 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 100,000 square meters |
| No. of Production Lines | Above 15 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | High |
Send your message to us
Multi-Head Multi-Row Boring Machine MZB73216
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1pcs pc
- Supply Capability:
- 1000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
