7.5kw Wood Working Dust Collector MF9080
- Loading Port:
- Shunde, China
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1pcs pc
- Supply Capability:
- 10000pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of 7.5kw Wood Working Dust Collector MF9080
This dust collector is used to collect wood dust, and it is very effective for all kinds of woodworking work.It is high speeded.
It is mainly used to collect wood dust, chips and shavings by cyclone of motor.
It works on the same principle as central cyclone dust collector. A fixed motor creates suction, which is distributed through the space via a network of rigid and flexible hoses to the point of use. Suction can be further regulated with the use of blast gates.
Features of 7.5kw Wood Working Dust Collector MF9080
1. It is easy to operate.
2. High quality.
3. Easy to Install
4. Easy for transportation.
5. No noises.
6. Special holder structure.
7. Multiple tube connection locations for air inlets and outlets.
8. Application:suit for industrial use and big factory.
9. High efficiency
Six Major Characteristics of 7.5kw Wood Working Dust Collector MF9080
1. The fan casing in tapered shape complies with the hydrostatics.
2. The helical impeller greatly improves the product performance.
3. The motor of special design saves the energy and consumption.
4. The innovative curling cylinder design operation convenient.
5. The electrochemical rust-proof treatment and surface powder spraying makes it always bright and beautiful.
6. The full-molded production for the overall machine guarantees its perfect quality.
7. The Machine get qualifier of environmental protection industry certificate.
Specifications of 7.5kw Wood Working Dust Collector MF9080
Motor power 7.5kw
Air delivery 8000m³/h
Air speed 40-45m/s
Inlet size Φ125mm*6pcs
Fan diameter Φ600mm
Collector bag Φ64*100cm*3pcs
Filter bag Φ15*180cm*36pcs
Overall size 332*113*315cm
Net weight 395kg
Packing of 7.5kw Wood Working Dust Collector MF9080
Boxes, optional package with polylon foam
Factory pictures of 7.5kw Wood Working Dust Collector MF9080
- Q: What are the categories of woodworking dust removal?
- Power consumption mainly depends on your volume or quantity, volume and power of natural increase. There is a key issue here is to the pipeline design and make scientific and reasonable, to minimize the resistance, reduce the pressure head fan, so that it can reduce the fan power and useless play a role in energy conservation.
- Q: How to determine the diameter of the suction port of the dust removal system?
- Do you mean the diameter of the main pipe or the main diameter of the distributor?.
- Q: What kind of dust collector is used in a furniture factory or a woodworking factory?
- Now, woodworking dust collector uses bag type pulse dust collector, which has less maintenance and high efficiency. The power of the central dust collector relative to the small Mongolia packet dust collector has been very power saving! According to the scale, how much dust remover do you need?. Now the dust collector is standard, especially in the park. Moreover, environmental inspection is now so strict, not only carpentry workshop, grinding workshop, paint shop should do environmental protection treatment. The environmental inspection of the past two years is definitely no joke. Make sure you get ready!
- Q: What problems should be paid attention to during the operation of woodworking bag filter?
- Check the filter for the compressed air system, the dryer is good, the air compressor is automatically shut down when it reaches a certain pressure. If it is not turned off, check that the pressure switch and control device are normal. The air compressor shall have a safety valve, and check to see if it works properly.
- Q: Woodworking dust collector is how to run, maintenance and management?
- Dust bag storage. For the storage of dust bags, we should pay attention to two problems. We must avoid humidity and not be exposed to direct sunlight to prevent the change of quality.
- Q: What kinds of dust collector can be used for dust removal in woodworking?
- Two suction tower, special to smell, and after two steps, the clean air can be arbitrarily discharged. About to smell there is still a kind of infrared heating technology, I think the technology is not mature, not Luanjiang, you can check, the best on-the-spot investigation. Power consumption depends mainly on your air volume or handling capacity, large air flow, power increases naturally. A key issue here is to the pipeline design and make scientific and reasonable, to minimize the resistance, reduce the pressure head of fan fan, so that it can reduce the useless work and play an important role in energy-saving.
- Q: How to remove the dust produced in the furniture workshop? What dust remover is better?
- Wood dust collector host 2014 new release is based on the original integrated type dust collector on the localization of the main parts, including electromagnetic valve, bag and control devices, the domestic mainstream brand, performance and service life have greatly improved, higher input costs, but the use of reliability and stability have great progress in space. For ordinary users, it is appropriate to use such equipment.
- Q: Woodworking dust removal centrifugal or axial flow of good?
- Axial fan has large air flow, but most of the axial fan pressure will not exceed 600Pa.
- Q: What are the principles and operation considerations of woodworking dust collector?
- Principle: the dust containing air into the gas chamber is provided with a bag of dust is adsorbed to form a layer in the surface of the filter bag, clean air through the fiber layer from each filter bag and an air outlet, clean air into the room, and then discharged through the fan
- Q: What should we pay attention to when we use the woodworking bag dust collector?
- Check the operation of the pulse valve regularly, whether or not the valve is leaking.
1. Manufacturer Overview
Location | Guangdong, China |
Year Established | 1993 |
Annual Output Value | US$300 Million |
Main Markets | Europe; North America; Southeast Asia; Mid East |
Company Certifications | ISO 9001 |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | Shenzhen |
Export Percentage | 80% |
No.of Employees in Trade Department | 500 People |
Language Spoken: | English; Chinese |
b) Factory Information | |
Factory Size: | 100,000 square meters |
No. of Production Lines | 8 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | High |
Send your message to us
7.5kw Wood Working Dust Collector MF9080
- Loading Port:
- Shunde, China
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1pcs pc
- Supply Capability:
- 10000pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords