UHP Graphite Electrode - Made in China High Performance for EAF Furnace Good Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 14 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Graphite Electrode For EAF Furnace
Packaging Details:
1: Wooden crates with steel straps; wooden crates treated with "IPPC" label
2: standard export fumigated wooden box with steel strip fixed outside
3: In wooden case, each nipple must be packed in cardboard box.
Each electrode and nipple to preset at one end. The head of the preset nipple shall be covered by cardboard cap supported by wooden plate from both ends to avoid damage to the threads during transportation
Delivery Detail: 15-45 days after confirming the contract
Production Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanical shock, high mechanical strength, high machining accuracy.
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 Industry Standard | Typical Values | ||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 | ||
- Q: What is the striking electrode in the die making? Where is the technical point?
- Technology of EDM should master the characteristics of electric discharge between tool electrode and workpiece is not in direct contact, but there is a gap, the gap is generally between 0.05~0.3mm, sometimes may reach 0.5mm or more, full of fluid, processing by high voltage pulsed discharge, the discharge of corrosion the workpiece.
- Q: How to solve the problem of graphite electrode being crushed during electrolysis
- This graphite electrode is so true because it causes gas to expand and disintegrateTantalum electrodes can be solved and not expensive
- Q: What is the graphite furnace electrode with a diameter of 400?
- With the development of EAF steelmaking technology, the steel-making technology is developing towards large scale and ultra high power. The graphite electrode is mainly made of large size graphite electrode and ultra high power graphite electrode.
- Q: Will the concentration of electrolytic sodium sulfite be increased with graphite as electrode?
- No, sodium sulfite reacts with the oxygen produced.
- Q: In EDM, the electrodes are made of graphite and copper. Please tell us the difference between them
- For the mold finishing, most of the time are red copper click, low loss, high precision, of course, higher precision, or requirements of copper tungsten alloy electrodes are also available
- Q: MITSUBISHI machine graphite electrode processing, how does not accumulate carbon?
- The impact of carbon on the car is quite large, first of all, to reduce the power of the engine, that is, to make the power output uneven and gradually attenuated, in other words, more and more lack of force. Two is to increase fuel consumption, increase your financial burden.
- Q: What is the application of wire cutting with graphite electrode?
- Greatly shorten the preparatory time of mechanical processing, and improve the level of automation of the whole process of machining, and also enhance the ability of the manufacturing system to adapt to changes in production conditions.
- Q: The graphite electrode made by the machining center adopts cooling method, which is water cooled, oil cooled and blow cold. Which is good?
- Use oil cold. Air cooling will cause graphite dust flying, on the one hand, toxic, on the one hand there are security risks (caused by circuit short circuit). Water cooling is virtually out of use, taking into account the maintenance and maintenance of the CNC.
- Q: After vacuum melting of quartz crucible, there are three graphite electrode rods. What's the adjustment?
- Or did you adjust the electrode when it was installed? There are two electrode distance, two away, causing melting after different lengths.
- Q: I used 12V direct current, graphite electrode electrolysis sodium sulfide solution, the anode produced a large number of black material, this is why ah?
- The actual electrolysis of hydrogen sulfide, which produces no black, or impurities that are absorbed by the anode, is graphite, because the dots explain the loose particles that are absorbed on the surface
Send your message to us
UHP Graphite Electrode - Made in China High Performance for EAF Furnace Good Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 14 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
