China Graphite Electrode for EAF Furnace with High and Stable Quality
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Graphite Electrode For EAF Furnace
Packaging Details:
1: Wooden crates with steel straps; wooden crates treated with "IPPC" label
2: standard export fumigated wooden box with steel strip fixed outside
3: In wooden case, each nipple must be packed in cardboard box.
Each electrode and nipple to preset at one end. The head of the preset nipple shall be covered by cardboard cap supported by wooden plate from both ends to avoid damage to the threads during transportation
Delivery Detail: 15-45 days after confirming the contract
Production Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanical shock, high mechanical strength, high machining accuracy.
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 Industry Standard | Typical Values | ||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 |
- Q:What does graphite electrode GSK mean?
- Graphite is made of high-strength graphite, it is a kind of graphite grade specification.
- Q:Why is the production of one ton of ultra high power graphite electrode requires 1.05 tons of coke?
- After calcined to eliminate ash and volatile part of the points in this process will be a lot of weight loss, in the process of crushing mixing in process of baking or graphite in high temperature heat treatment, another part of the impurities were excluded, so the raw material is higher than the rate of finished products.
- Q:Why should graphite paper be placed between the heater and the graphite electrode?
- Determine the thickness of the graphite bowl, the thickness of the graphite bowl is generally 3 mm -6 mm, three, determine the diameter of the heater, according to the diameter of the crucible and the thickness of the graphite bowl, calculate the inner diameter of the heater. The gap in the quartz crucible diameter phi = +2 times is +2 times the wall thickness of stone bowl bowl and graphite heater if the graphite bowl wall thickness is a, graphite bowl gap and heater for B (b=5 mm), phi = Phi Phi +2a+2b= within the outer crucible outer crucible +2 (a+b) four, to determine the effective heater the height after practice, the effective length of the quartz crucible heater is high 1.6 to 1.8 times.
- Q:How large is the permissible overload current per square millimeter of the graphite electrode cross section?
- Overhead wires, radiating the best conditions, allowed the current largest. The insulated wire in the house is laid in the wall, which has the worst heat release conditions and the smaller permissible current, so there are different safety currents.
- Q:Why should the carbon brush for the trolley be made of graphite?
- What you said is the graphite electrode graphite, there may be a high pure graphite graphite conductive rate so high, strong, high density, the graphite is mostly used in motor vehicles, such as generators, and electric tools.
- Q:Carbon graphite electrode and what is the difference?
- Graphite electrode is a mixture of natural graphite and petroleum coke and asphalt coke. After being treated by high temperature graphitization, the material is composed of graphite;
- Q:How about graphite electrode high-temperature oxidation resistant coating?
- Heat resistant coating is generally able to withstand 300 degrees below the temperature, commonly used aluminum heat-resistant paint, high temperature resistance can withstand higher temperatures, such as 800 degrees or more, commonly used silicone heat-resistant paint
- Q:What's the use of carbon?
- High power graphite electrode. Allows the use of current density of 18 ~ 25A/ cm 2 graphite electrode, mainly used in steel-making high power arc furnace
- Q:Is the anode of electrolytic water suitable for ordinary titanium wires?
- The graphite is cheaper and easier to obtain, but the carbon electrodes sold in the general market are not very pure at most times. The experiment is done for a period of time, and the carbon is inexplicably broken, especially if you need to work for a long time. So, if your graphite electrode is of good quality, it's still graphite.
- Q:The graphite electrode made by the machining center adopts cooling method, which is water cooled, oil cooled and blow cold. Which is good?
- Of course you do is oil cold if not toxic cooling but although graphite powder lubrication seems to have damage to the CNC, that someone with a water-cooled graphite again even with saponification liquid will rust and easy cleaning
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
China Graphite Electrode for EAF Furnace with High and Stable Quality
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches