LED STREET LIGHT CNBM 300W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 300W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | CNBM-H300 | ||
Power | 300W | ||
LED Quantity | 144pcs×2W | ||
Input Voltage | AC 100~277V;50/60HZ | ||
Input current | 2.72A(110V),1.36A(220V) | ||
PF | ＞0.95 | ||
CRI | ≥70 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 5000/5700K |
Luminous flux(±10%) | 30000 lm | 33000 lm | 36000 lm |
Dimension | L780*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -30 to +50 ℃ | ||
Storage temperature | -40 to +70 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years | ||
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q: Solar LED street lamp, how much is a set of solar street lamps wholesale price?
- Solar street lighting controller is divided into two buck and step-up, Buck 50 yuan, step-up 80 yuan, the warranty for three years. Yangzhou is the largest production base of street lamps in China, which can be visited by manufacturers.
- Q: How to determine the power of LED street light?
- There are a lot of a lamp of general LED lamp, according to a count of each tileIf the LED street lamp is a block of chip, it can be installed according to the height and brightness of the street lamp, and then it can be estimated that each block is 30W/50/100W
- Q: Is it suitable to install toughened glass cover on the luminous cavity of high power LED street lamp?
- Can install the toughened glass, tempered glass resistance explosion-proof Guangyu lighting
- Q: How is the rated current of the LED street lamp holder?
- The rated power of the lamp cap is divided by the input voltage and then divided by the power factor.
- Q: LED good or low frequency electrodeless lamp?
- LED is the light produced by hole migration. Electrodeless lamp is an electromagnetic field to excite gas particles. Judging from the current technology, LED is not mature, so electrodeless lamp is better
- Q: How high should the installation height of the LED street lamp be?
- When the width of the road is A, the height of the courtyard lamp can be selected according to 0.6A (single side cloth light) to 1.2A (bilateral symmetrical cloth light), but not higher than 3.5m. The distance between the lamp posts of the courtyard is 15 to 20m. 100 percent lighting LED street lighting project transformation, according to the road section to carry out, you can go to understand!
- Q: LED lights at home after the power cut slightly bright, and the original street lights related, street lights LED lights, street lights off, led pass, how to solve?
- LED lights turn off the light: 1, the switch is cut off the zero line, you can change the line.
- Q: LED street lamp, glass lens, mold opening, research and development
- The development and opening of the optical glass lens belong to the two light distribution design. In the use of LED devices, the whole system in the distribution of light intensity, temperature effect, can not meet the engineering requirements, in order to meet the engineering requirements of the LED device to send the concentrated light to the desired lighting area, so that the entire LED lighting system can achieve the desired effect. This is called the two optical design, also known as the two light distribution.
- Q: LED lamp with air leakage to help the thunder?
- No help.The leakage switch only appears on the circuit of the output end of the switch, the leakage current exceeds the set value automatically, and the utility model plays the role of protecting the output terminal.But the lightning stroke does not have the protective function to the leakage switch.
- Q: How big wires should fifteen LED street lights require?
- Yes, you need to know what the power value is for each or 15 street lights
Send your message to us
LED STREET LIGHT CNBM 300W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
