LED STREET LIGHT CNBM 150W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 150W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | H150 | ||
Power | 150W | ||
LED Quantity | 72pcs×2.1W | ||
Input Voltage | AC 100~277V;50/60HZ | ||
Input current | 1.36A(110V),0.68A(220V) | ||
PF | ＞0.95 | ||
CRI | ≥70 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 5000/5700K |
Luminous flux(±10%) | 15800 lm | 16500 lm | 18000 lm |
Dimension | L555*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -40 to +70 ℃ | ||
Storage temperature | -40 to +80 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years | ||
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q: What is the grade of protection for Mega LED road lamp holder?
- Street lights, then the higher the level of protection must be good, the market that can reach IP65, it depends on how the quality of the product, the better the quality, protection level more reliable.
- Q: What is the maximum power of a LED street lamp at present?
- If it is integrated, this power can be achieved.
- Q: Do you know the assembly process of the LED street lamp?
- The visual appearance of a lamp shade, a lamp cup, no scratch, burr, crack, deformation and other undesirable phenomena. Take a set of samples for trial installation to confirm the size and location of the screw holes in the fittings. Visually check whether the circuit board and the polarity of the components are clearly defined; whether the copper foil is bulged or not; use the multimeter to test whether the circuit (aluminum substrate) has an open circuit or a short circuit. Check the LED luminous color and brightness, color temperature is consistent with the required, LED light surface scratches, whether the welding pin is bright. Load power supply parameters and actual values confirm whether consistent. 3 aluminum substrate screws, Palm / white two 6cm long power cord is appropriate?.
- Q: Materials required for LED street lamp installation
- The lamp holder, the lamp pole, the controller, the battery, and the solar panel
- Q: Is the street lamp good with LED or solar energy?
- Hello The two concepts, the LED street lamp and the solar street light, are in themselves no conflict, just as you think, are you wearing a black coat or black shoes today? The actual two do not conflict.
- Q: What are the standards for LED street lighting?
- The average illuminance (Eav) = the number of single light flux Phi x lamps (N) by the coefficient of X space (CU) * (K) / maintenance coefficient of floor area (length * width) only need to know is that the parameters of LED, such as the beam angle is 120 degrees.
- Q: What is the LED Street pressure balancing respirator?
- LED lamp pressure balancing apparatus is also called micro PU waterproof breathable valve at home, LED street is a wide application of pressure balance apparatus, such as: LED outdoor lighting, communication equipment, solar photovoltaic, auto controller etc..The role of the LED Street pressure balancing respirator is as follows:1, waterproof, dustproof, anti pollution, protection level IP65~IP68.2, chemical resistance, high and low temperature, anti-aging and so on, improve the harsh environment of the product reliability.3, prevent condensation, fog, and improve product life.4 、 micro heat dissipation and balance pressure difference. Improve product integrity.
- Q: What is the difference between solar LED street lamp and ordinary energy-saving street lamp?
- Making full use of solar energy resources has positive significance for alleviating the tension of conventional energy sources. LED and solar lighting installation is simple and convenient, do not need the laying of cables and other large foundation engineering like ordinary street, just need to have a fixed base line, and all the control sections are placed in the lamp holder, to form a whole.
- Q: LED street lamps must be constant flow source? No constant current source, can I?
- Now generally constant current power supply, if not the constant current power supply has a great damage to the lamp
- Q: What is the LED lamp light?
- LED is English light emitting diode (light emitting diode) abbreviation, its basic structure is a electroluminescent semiconductor chip light emitting materials, with silver glue or glue curing to the bracket, connecting a chip and a circuit board and then with silver or gold, then sealed with epoxy resin around, to protect the internal core role finally, the installation shell, so the seismic performance of LED lamp is good.
Send your message to us
LED STREET LIGHT CNBM 150W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
