LED STREET LIGHT CNBM30W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 30W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model H30
Power 30W
LED Quantity 24pcs×1.2W
Input Voltage AC 100~277V;50/60HZ
Input current 0.3A(110V),0.15A(220V)
PF ＞0.95
CRI ≥70
Beam angle 140°×60°
CCT 3000K 4000K 6000K
Luminous flux(±10%) 3000 lm 3300 lm 3600 lm
Dimension L405*W328*H108mm
IP rating IP66
Material Aluminum alloy
Anti-corrosion grade WF2
Working temperature -30 to +50 ℃
Storage temperature -40 to +70 ℃
Working humidity 10% to 95%
Warranty 6 years
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q: What is the price of the LED street lamp from 30W to 60W? What are the advantages of the LED street lamp?
- LED lamp with directional light, low power consumption, good drive performance, fast response speed, high seismic capacity and long service life, environmental protection and other advantages of gradually into people's vision, the world has become a new generation of energy-saving light source, so the advantages of substitution of traditional light, LED lamp will become the best choice for energy saving road lighting. LED street lamp, that is semiconductor lighting lamp, uses light-emitting diode as light source. Because it is a solid cold light source, it has the characteristics of environmental protection, no pollution, less power consumption, high light efficiency and long service life.
- Q: The power consumption of a street lamp?
- Halogen lamp 200W 5 hour kilowatt hourLight bulb 100W 10 hour kilowatt hour
- Q: Is there any national standard for surface coating of LED street lamp?
- Yes, there is no specific standard in our country at present, as long as you can wear the standard of corrosion prevention!
- Q: What is the design height and illuminance of LED street lamps?
- 1, the first screenshot of table 5.1.3, Weff means: effective width of the road.2, the above lamps refer to conventional lighting, the so-called regular lighting is the lamp installation height of 15 meters below the lamppost.3, light cut type refers to: the maximum light intensity direction of the lamp and the vertical axis of the lamp included angle between 0-65 degrees.4, half light type refers to: the maximum light intensity direction of the lamp and the vertical axis of the lamp included angle between 0-75 degrees.
- Q: Do constant current LED power supply for street lamp power supply? Is it better to use LED constant voltage power supply?
- LED lamp driver adopts constant current power supply, more safe and reliable, because as a street lamp is often more power, more should use constant flow performance and LED lamp matching driver.
- Q: Please use LED lamp beads with other lamp beads is not the same?
- It is nonsense, misleading, the landlord said principle two lights are the same, just as there is a single lamp, open circuit protection, but can not reverse voltage higher than the manufacturer's logo. For street lights, open circuit protection is integrated into the drive circuit,
- Q: LED street lamp, glass lens, mold opening, research and development
- The two light distribution design must be carried out on the basis of the primary light distribution design of the LED light emitting device. Once, the light distribution design is to ensure the quality of each LED light emitting device, and consider taking the light emitted from the LED chip as much as possible. And the two light distribution design is to consider how to focus the light emitted by the LED device on the desired lighting area, so that the light energy delivered by the whole system meets the design requirements. In a sense, only the packaging design (that is, once the light distribution design) is reasonable, in order to ensure the smooth realization of the system's two light distribution design, thereby enhancing the lighting and display effects.
- Q: Why does a LED street lighting system come with a phase light?
- Because the LED light current is in the Ma level and slightly leaks, the current will shine.
- Q: What's the reason why the LED street lights don't work?
- The LED lamp power is waterproof power, bad to change new power protection function is not perfect, directly affect the quality of fault phenomenon LED lamp 2, bad part there are several possibilities: 1), such as LED lighting power supply for multi-channel constant output, which may be a group of bad, 2) is LED chip is not good, or is the LED lamp cooling caused by bad burn LED chip.
- Q: What is the problem of flashing LED street lights on the side of the road?
- Check whether the current limiting resistor in the circuit has changed, or whether the current of the power supply is off the rated value. If it's a different LED flash, it's a LED quality problem that needs to be replaced.
Send your message to us
LED STREET LIGHT CNBM30W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
