LED STREET LIGHT CNBM 100W WITH LIGHT EFFICIENCY 130LM/W
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 100W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | H100 | ||
Power | 100W | ||
LED Quantity | 48pcs×2W | ||
Input Voltage | AC 100~277V;50/60HZ | ||
Input current | 0.91A(110V),0.45A(220V) | ||
PF | >0.95 | ||
CRI | ≥70 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 5000/5700K |
Luminous flux(±10%) | 10000 lm | 11000 lm | 12000 lm |
Dimension | L480*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -30 to +50 ℃ | ||
Storage temperature | -40 to +70 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years |
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q: Solar LED street lighting industry prospects really so good?
- All may be bad, and the solar street lamp power is low, can not meet the lighting requirements. It is better to use the LED directly to connect the city power, and the savings of solar panels and batteries are less than the direct payment of the electricity, and the stability is better, and the maintenance is reduced.
- Q: What is the active power of LED street lamp? What is the relationship between input voltage and current and power?
- When the alternating current through the load resistor, and the resistance of the AC voltage and AC current through the resistor is the same phase, and between them the phase angle phi = 0 degrees, while the active power consumption in the resistive load, power grid to supply energy. When the alternating current through the pure inductance load, phase AC voltage on the advanced phase of current 90 degrees and the angle between them phi = 90 DEG, produce reactive power in inductive load, power supply of electric energy in the inductor for temporary storage and magnetic energy back to the grid into electricity such a periodic cycle, results for grid is not energy, so that the "reactive power", but "reactive power" and "reactive current" still exist. When alternating current through pure capacitance load, also similar to this, but the phase AC voltage on the lag phase of current 90 degrees and the angle between them phi = - 90 degrees.
- Q: The width of the road is 20 meters, the distance of the street lamp is 25 meters, and the number of tiles is led. How much is the pole?. How to calculate?
- Symmetrical lamp, rod 10 meters high25 illuminance, (10*1.414*2) *10*25/90=77WTherefore, it is recommended to install LED lamp 70~100W30 illumination, 100-120WThe above is based on quality chip light source calculation
- Q: LED good or low frequency electrodeless lamp?
- LED light is still very serious, uneven quality, used for a long time, as black as under the lamp
- Q: How to select suitable driving power for LED street lamp
- A high pole lamp power, there are some low power courtyard street lamp, a power voltage, there are low, are prone areas in lightning, so the constant current drive, not only good performance, but also can be good heat dissipation, anti lightning, anti rain.
- Q: Is the price of the street lamp factory in led the same?
- LED lights for their respective products factory price countries has not been unified, now rely on market regulation and macro-control and their purchase of LED street customer awareness of the product, the key is led lamps factory enterprise conscience.
- Q: What are the ways to save energy in street lamps?
- Street lamp wireless monitoring system: the "three remote" monitoring system is adopted, and the lighting monitoring system is composed of a microcomputer network system of the central dispatch room, a wireless communication system and a street lamp switch box and an intelligent terminal. According to the local time of sunrise and sunset and light value, a control method with time control and light control combination, automatic remote control on / off through the wireless channel, and can intelligently adjust the voltage, voltage, current, power and other field telemetry data, but the data was collected and analyzed, so as to judge the lamp operation.
- Q: LED street lights installed on both sides of the road, horizontal installation and angle installation (0~30 degrees), natural convection heat dissipation, that good heat dissipation.
- Generally speaking, this is a better angle installation, and the light source installed vertically below is the best,In fluid mechanics, the density of hot air is smaller than that of cold air, small density, light mass of hot air rises, cold air sinks, and natural convection occurs. But it doesn't have to be angled, depending on the shape of your fin design and the way it is cooled.
- Q: How much is the price of a LED street lamp?
- Of course, because of the quality of the project involved in the maintenance and follow-up maintenance services, the price of another talk.
- Q: How much is the rated voltage of the LED street lamp? Is it direct current?
- It is worth noting that, if the solar LED street lights, then certainly the input DC, and as many volts, still depends on the situation.
Send your message to us
LED STREET LIGHT CNBM 100W WITH LIGHT EFFICIENCY 130LM/W
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches