LED STREET LIGHT CNBM 130W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 130W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | H130 | ||
Power | 130W | ||
LED Quantity | 56pcs×2.2W | ||
Input Voltage | AC 100~277V;50/60HZ | ||
Input current | 1.2A(110V),0.6A(220V) | ||
PF | ＞0.97 | ||
CRI | ≥70 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 5000/5700K |
Luminous flux(±10%) | 13000 lm | 14300 lm | 15600 lm |
Dimension | L590*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -30 to +50 ℃ | ||
Storage temperature | -40 to +70 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years | ||
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q: Solar LED street lamp, how much is a set of solar street lamps wholesale price?
- Now the conventional 6 meter 30W power solar energy set price is about 1260 yuan, the detailed price ha needs to calculate according to the lighting time and the rainy days.
- Q: What is the principle of constant current power supply in LED street lamps?
- Inductors, coils, transformers, these inductors are switching power components, one of the main characters,The role is to assume load or pressure, isolation, filtering and so on.All other components, resistors, capacitors, and protective elements are used.
- Q: How much is the LED terminal voltage of the solar street light controller v?
- This depends on the situation, LED, the general is 5V
- Q: What is the heat dissipation principle of a LED street lamp?
- The road lamp with outdoor use at night, located on the side of the radiating surface above as well as restricted small benefit to the air natural convection, so LED road lamp cap recommendations as far as possible to choose natural convection cooling.
- Q: What is the reason that the longer the wire pulls on the LED street lamp, the lower the voltage?
- Wires have resistances. The longer the wires or wires, the smaller the resistance, the greater the resistance.
- Q: What heat sink is best for LED street lamp radiator?
- What is the external force of heat, force, that is to say, with the use of external heat, fan in the lamps or using superconducting tube, water-cooled, and so on, the advantage of active heat dissipation, efficiency has been improved, but the structure is complicated, the cost is increased, and the service life of the cooling equipment is generally not too long, less than 2 years is basically finished.
- Q: What's the reason why the LED street lights don't work?
- The LED lamp power is waterproof power, bad to change new power protection function is not perfect, directly affect the quality of fault phenomenon LED lamp 2, bad part there are several possibilities: 1), such as LED lighting power supply for multi-channel constant output, which may be a group of bad, 2) is LED chip is not good, or is the LED lamp cooling caused by bad burn LED chip.
- Q: Is the power LED lamp constantly flashing? Is it a power supply problem?
- LED lamp and LED drive power does not match the normal single foot 1W beads under current: 280-300mA, voltage: 3.0-3.4V, if not enough power LED chip will cause light source stroboscopic phenomenon, it can not withstand the current high lamp of a bright, serious phenomenon of the light beads of gold or copper built-in burning off the lead light is not bright.
- Q: Road light is one of LED. How much is it?
- The price of street lamp should be based on the caliber, height, wall thickness, shape of lamp, power source of light source and choice of chip driver.
- Q: How much is the rated voltage of the LED street lamp? Is it direct current?
- It is worth noting that, if the solar LED street lights, then certainly the input DC, and as many volts, still depends on the situation.
Send your message to us
LED STREET LIGHT CNBM 130W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
