High Pressure Laminating used for Kitchen Sheets Low Price
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m²
- Supply Capability:
- 50000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Description of HPL:
HPL are high quality decoration material , which are widely applied to furniture,kitchen cabinet,cupboard, countertop, window, door skin, wall lining, partition, ship lining ,ceiling, lift lining, shop fitting,shelving, etc .
Fireproof board / refractory plate is base paper after melamine resin and phenolic resin processing, main physical properties is unfolded by the characteristics of the resins. After the melamine resin thermosetting moulding have luster good, good transparency, high surface hardness, wear-resisting, withstand high temperatures, impact resistance, surface pores small is not easy to be contaminated, chemical resistance, water resistance, resistance to solvent, flame resistance and other excellent performance, mechanical strength, electrical insulation, resistance to arc good and is not easy to aging. Phenolic resin thermoset molding after heat and hard performance. Two kinds of resin combination, fireproof board / refractory plate contains both the performance.
2.Feature of HPL:
1) Finishied via impregnating the decorative paper and kraft paper in melamine,drying and high temperature and presure
2) Outstanding resistance to abrasion,high tempreature,dirty,shocking,cigarette ignition and open flame
3) Exceptional mould proof performance ,has very wide application and very big market potential
4) Decorative surface material for both indoor and outdoor use
5) Widely used in surface decoration of rooms, offices, compartments, partitions, kitchens, sideboards, furniture and laboratory table tops
6) wear-resistant, fire-resistant, anti-static, chemical resistant
7) Acid resistance and alkali resistance
8) Abrasive resistance
9) Amazing colors and rich in colors. High glossy and matte is available.
10) Easy to clean
3.Images of HPL:
4.Specifications of HPL:
1. size
1220mmx2440mm 1220mmx3050mm 1310mmx2440mm 1310mm x3050mm
2. thickness
Standard HPL: 0.5mm~1.0mm.
Post-forming HPL: 0.5mm~0.6mm.
Metallic HPL: 0.7mm~1.0mm
Compact: 1.0mm~12mm.
3. color
Solid/plain color, fantastic color, wood grain color, metal, wooden veneer or customized color
4. surface finishing Glossy, Matt, Texture and some other special surfaces.
5. packing Wooden case for HPL/ wooden Pallet for Compact Laminate
0.5mm: LOAD: 14 cases per 20ft container, 600pcsX14cases=8400PCS
WEIGHT: 2.2KGX8400PCS+80kgX14cases=19.60TON
0.6mm: LOAD: 14 cases per 20ft container, 500pcsX14cases=7000 PCS
WEIGHT: 2.7KGX7000PCS+80kgX14cases=20.02TON
0.7mm: LOAD: 14 cases per 20ft container, 450pcsX14cases=6300 PCS
WEIGHT: 3.1KGX6300PCS+80kgX14cases=20.65TON
0.8mm: LOAD: 14cases per 20ft container, 400pcsX14cases =5600 PCS
WEIGHT: 3.6KGX5600PCS+80kgX14cases=21.28TON
5.FAQ
1. What kind of certificate do you have?
ISO9001, CE, UL,CARB, CNAS
2. What color can you produce?
Solid color wood grain color or according to customs' requirements.
3. How about the samples?
For the samples, it will be prepared ASAP.
4. Do you charge for the Samples?
According to our company policy, we will charge you the express fee in the first time but the sample will be free. While we start our business, we will reimburse the money for you
5. Can you produce according to customer's design?
Sure, we are professional manufacturer, OEM are welcome. While the beginning you need to pay the moulded open fees and Orders meet the minimum ordering quantity of special products
- Q: Is it permissible or permitted to block the use of fireproofing in cable ducts?
- Construction electrical engineering construction quality acceptance in Article 12.2.1 Article 6 provides "laying in the shaft and different fire partitions of the bridge, according to the design requirements of the location, there are fire blocking measures." This lazy rough short Nao stubble Preserving flowers in the "design requirements of the location" is generally in the fire partition wall.
- Q: Do you need to do floor fire isolation? There are those regulations for fire protection
- 2.10 The cable wells and pipe wells in the building shall be burned at every floor of the building. The non - combustible body shall not be used at a level not exceeding the fire resistance of the floor. Or fire blocking material plugging.
- Q: Height greater than 60m residential building construction, when the use of B1-class insulation material, every few layers to set the level of fire isolation belt?
- (A) residential construction should meet the following requirements: 1, height greater than or equal to 100m of the building, the insulation of the combustion properties of the material should be a bile to pick up the state. 2, the height is greater than or equal to 60m less than 100m of the building, the insulation properties of the combustion performance should not be lower than B2. When using B2 insulation material, each layer should be set to a level of fire isolation zone. 3, the height is greater than or equal to 24m less than 60m of the building, the insulation of the combustion performance should not be lower than B2. When using B2 insulation material, each two layers should be set to the level of fire isolation zone. 4, the height of less than 24m of the building, the insulation properties of the combustion performance should not be lower than the B2 level. Among them, when the use of B2-class insulation material, the three should be set up a horizontal fire isolation zone.
- Q: Phenolic insulation board is B1 grade fireproof material
- Bare board is b1 level, complex and after a class
- Q: What are the building firefighting materials?
- Fire water, fire pumps, fire pumps, wet alarm valves, water pump adapters, shower heads, indoor (outdoor) fire hydrants, flow indicators, signal valves, galvanized pipes and fittings, etc .; fire main fire alarm series , Emergency evacuation series, radio and other communications; gas fire mainly include cylinders, pharmaceuticals, manifolds, selection valves, high pressure pipe fittings, nozzles, etc .; in addition to smoke control system, fire doors, fire shutter, fire window Wait
- Q: Rubber insulation material fire it?
- There are fire, but up to B1 level, more than half of ordinary.
- Q: What is the raw material for producing fire retardant coatings?
- The specific I can not say that it is a trade secret but can generally talk about 1. Non-intumescent concrete fire retardant coating, is made of inorganic adhesives and organic adhesives, and fire-resistant insulation materials by a reasonable modulation of the fire insulation Coating material. Its low density, good adhesion, good insulation, anti-aging, weather resistance, easy construction. Once the fire occurs on the surface of the coating will form a barrier oxygen, fire glaze layer, in the 2h range can guarantee the concrete components do not crack, do not collapse. 2. Thick steel structure fire insulation coating by the porous insulation materials, adhesives and performance moderators, non-asbestos. The protected steel structure, due to the thermal insulation coating, has a function of suppressing the combustion and preventing the fire from escaping the function of the flame, which significantly improves the fire resistance level. 3. Thin steel structure Fireproof coating is made of binder and refractory insulation material grinding, mixing, mixing made. The coating is water-based and has no pollution to the environment, but the construction and storage temperature should be & gt; 0 ° C. Spraying wipes are best to spray the best. After coating film, resistant to moisture, weather resistance, corrosion resistance, anti-aging also adjustable the corresponding color. The effect is convex and numb. According to the project requirements, but also smooth.
- Q: What is Class A Fire What is Class B Fireproof?
- Class A, B level in two different standards, please do not confuse. A-level assessment criteria for the GB8624-1997, and B-level GB8624-2006. GB8624-1997 medium-level mainly: A-class, B1 level, B2 level, the current standard has been void, replaced by GB8624-2006. In the GB8624-2006, the general material classification: A1 grade, A2 grade Chuanchuan devaluation collision turtle sandstorm, B, C, D, E, F, floor material: A1fl level, A2fl AC, insulation, insulation material: A1L level, A2L level, BL level, CL grade, DL level, EL level, FL level, the above level are from high to low level, Bfl level, Cfl level, Dfl level, Efl level, Ffl level arrangement. GB8624-1997 A level can correspond to GB8624-2006 in the A1 and A2 level. The difference between the old and the new standard is that the A-level is only tested for incombustibility, while the A1 level detects the incombustibility and total combustion calorific value, the A2-level test incombustibility, the SBI monomer combustion test (or the total combustion calorific value, the SBI monomer combustion test , One of the two). While the B-level test items for the SBI monomer combustion test, flammability and so on. Details if you need, please leave the mailbox, I sent you.
- Q: Must be fireproof material!
- Can not! That stuff is full of it! In the past, our company is the thing to engage in fire!
- Q: What are the fireproof materials for Class A roof insulation?
- At present, only phenolic board can meet the requirements, the test temperature of 2000 degrees, no droplets, good integrity. The thermal conductivity of non-combustible, non-toxic, smoke-free!
Send your message to us
High Pressure Laminating used for Kitchen Sheets Low Price
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m²
- Supply Capability:
- 50000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
