High Quality Graphite Powder for Planters - Graphited Petroleum Coke Graphite Electrodes for Steel Industry
- Ref Price:
-
$1,850.00
/ m.t.
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Graphited Petroleum Coke
1. Production technics:
Product characteristics and application scope: high content of fixed carbon, low sulfur content, stable carburetion effect and high absorptivity of carbon, best degree of graphitization, improve the nucleation of melted iron, it is mainly applied to the carburetion of various electro-smelting cast steel and iron casting.
2. Recommended method of application:
adjust carbon content while blending, add it into the place below the middle part of the electric furnace along with metal furnace charge when melting down liquid steel(iron) in accordance with the requirement of carbon content, absorptivity of carbon could reach 90%-95%, during strong carburant residue shall not appear, otherwise it is easy to be wrapped in the non-waste residue and influence the absorption of carbon thereby.
Type | Size (90%) | C (min） | S (max) | Ash (max) | V.M. (max) | Moisture (max) |
CPC (Calcined petroleum coke) | 0-2mm | 98.5% | 1.5% | 0.8% | 1.0% | 0.5% |
CPC (Calcined petroleum coke) | 0-2mm | 98.5% | 1.0% | 0.6% | 1.0% | 0.5% |
Graphited CPC-1 | 1-5mm | 99.0% | 0.05% | 0.5% | 1.0% | 0.5% |
Graphited CPC-2 | 0-2mm | 96.5% | 0.4% | 2.0% | 1.0% | 0.5% |
Graphited CPC-3 | 1-5mm | 98.0% | 0.5% | 1.0% | 1.0% | 0.5% |
Graphited CPC-4 | 0-1mm | 95.0% | 0.6% | 4.0% | 1.5% | 0.5% |
Electrode scrap-1 | 0.5-3mm | 98.5% | 0.05% | 0.5% | 0.5% | 0.5% |
Electrode scrap-2 | 0.3-0.5mm | 98.5% | 0.05% | 0.5% | 1.0% | 0.5% |
Electrode scrap-3 | 0-0.3mm | 98.5% | 0.05% | 0.5% | 1.0% | 0.5% |
Coke Dust | Fine grain | 97.0% | 1.0% | 3.0% | 1.0% | 0.5% |
Coke Dust | Fine grain | 85.0% | 1.5% | 10.0% | 3.0% | 0.5% |
CPC (high ash) | 0-2mm | 85.0% | 2.0% | 15.0% | 2.0% | 0.5% |
CPC (high ash) | 0-10mm | 85.0% | 2.0% | 15.0% | 2.0% | 0.5% |
3. Pictures of the Products
4. FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your Warranty？
Warranty: 1-Year for the whole light. Warranty is based on correct storage, installation, using and maintenanc
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance. We have D&B report and you could check details information for our company.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible.
- Q: Are sand and particle powders used for casting quartz sand? Detailed and accurate.
- Casting molding mainly used for special silica sand, zircon sand, magnesia and chromite, pearl sand, graphite sand. Casting powder mainly used in coatings, such as: quartz powder, bauxite powder, zircon powder, graphite powder, etc.
- Q: Is the graphite electrode broken like graphite, fossil oil, coke and graphite powder?
- The graphite powder is soft, black and gray, greasy and polluting paper. Hardness is 1~2, along the vertical direction with the increase of impurities, its hardness can be increased to 3~5. The specific gravity is 1.9 ~ 2.3. Under isolated oxygen conditions, the melting point is above 3000 degrees Celsius and is one of the most refractory minerals. At room temperature, the chemical properties of stone toner are relatively stable, insoluble in water, dilute acid, dilute alkali and organic solvents. The material has high temperature resistance and conductivity, and can be used as refractory materials, conductive materials, wear-resistant and lubricating materials.
- Q: Where are the graphite powders sold?
- The graphite powder only local graphite mineral resources have now sold, graphite powder mainly sold through e-commerce channels from the Internet, Huatai graphite powder sales network covering more than 20 cities and counties, we are more than 20 years of graphite powder manufacturers
- Q: How to measure the conductivity of powdered graphite?
- Voltammetric measurement of resistanceMethods: using precision small range measurement of electricity meter, multimeter resistance or contrast test you can use small bulbs, according to the brightness of his conductivity, if the bulb is more bright, that resistance is lower.
- Q: What if the key is inserted in the hole and can not be drawn out?
- This is not a simple question, to the dorm there, there will be someone to help you repair
- Q: How to measure the iron content in graphite powder?
- Excessive amounts of dilute sulphuric acid can be used to measure the amount of gas produced, and then the amount of iron is calculated according to the amount of gas.
- Q: What solvent can be used to dissolve Teflon?
- PTFE is not dissolved after Teflon, it is impossible to mix with graphite powder this thing.
- Q: Graphite and graphite in the end is not a matter I would like to know the graphite and graphite
- Graphite gum APS two, colloidal or semi - colloidal graphite. (a) colloidal graphite, graphite powder from natural or artificial graphite fine powder in water or other media (e.g., alcohol, mineral oil) colloidal suspensions in the form, and can add a few other products (e.g., tannic acid or ammonia) to be stable. Colloidal graphite is usually semi liquid and is used primarily for lubricating products or for its high electrical conductivity. (two) a semi colloidal graphite (i.e., a colloidal suspension of graphite in water or other medium). Semi crystalline graphite can be used to prepare graphite lubricants or to form graphitized surfaces. This class contains only colloidal or semi colloidal suspensions of graphite with graphite as base material in any medium.
- Q: What is the ratio of the coated sand to the graphite powder? How to improve the refractoriness of precoated sand
- Or change the sand species, change the high refractoriness sand species, this cost is relatively large.
- Q: Why does the temperature rise when the graphite powder is turned on?
- What is the value of resistance, and this value is not an accurate number, because the graphite powder thickness is not the same, used in different materials and environment, graphite powder, resistance value will be different.
Send your message to us
High Quality Graphite Powder for Planters - Graphited Petroleum Coke Graphite Electrodes for Steel Industry
- Ref Price:
-
$1,850.00
/ m.t.
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
