Graphite Mold Suppliers Horizontal Continuous Casting Flat Mould
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 10,000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
- Application: Casting
- Technique: Die Molded
- Dimensions: Various of specification according to customers' requirement
- Bulk Density (g/cm³ ): ≥1.87g/cm³
- Porosity (%): 15%
- Compressive Strength: 65Mpa-85Mpa
- Composition: Carbon
Specifications
Graphite Mould1 high pure and density
2 mould for casting industry
3 high strength graphite
4 long using life
Graphite Mould
Feature:
1. Thermal stability: According to the quench acute thermal using conditions of graphite crucible, we will specially design the production procedure, so as to ensure the reliability of product quality.
2. Corrosion resistance: Even and fine basic design will delay the erosion of crucible.
3. Impact resistance: Graphite crucible can bear high thermal impact, so any process can be carried out.
4. Acid resistance: The adding of special materials will greatly improve the quality of crucible, especially its index of acid resistance., and will prolong the service life of graphite crucible.
5. High heat Conduction: High content of fixed carbon ensures the good heat conduction, shorten the time of dissolution, and remarkably reduce the energy consumption.
6. Control of metal pollution: The component of material under strict control will ensure that graphite crucible will not pollute the metals when dissolving.
7. Quality stability: The process technology of forming under high pressure and quality guarantee system will fully ensure the stability of quality
Graphite molds Materials index:
1.Content: 99.99%
2.Density: 1.87g/cm³
3.Compressive strength: 65mPa
4.Shore hardness: 55
5.Porosity: 15%
Application:
1. Brass continuous casting mould
2. Red copper continuous casting mould
3. Continuous casting mould for jewelry of gold, silver, platinum, etc.
4. Steel and stainless steel continuous casting mould.
By the shape of the cast product, it is divided into round bar mould, hollow tube mould, and shaped mould.
- Q: What are the electrodes on the die?
- Graphite electrode has the advantages of easy processing, high metal removal rate and low graphite loss. Therefore, more and more die factories give up the use of copper electrode instead of graphite electrode.
- Q: How to make the graphite mould and how to form the graphite mould?
- Commercial pasteIs that the raw material (after crushing anthracite or coke particles and binder) under the condition of heating mixed evenly, without pressure and further heat processing, and as long as the paste material after heating and mixing in normal circumstances, a simple block or a container to use the product. According to the use of two can be divided into one, as a continuous self baking electrode used; the other is the use of carbon block block bonding and caulking material. The manufacturing process of the paste is simple, the production cycle is short, and the cost is low.
- Q: What are the specific categories of Shi Moru?
- The utility model is a black paste, which has micro ammonia flavor, is easy to disperse in water, does not pollute the environment, and is easy to use. Forged graphite milk is widely used and can be coated on a variety of substrate surfaces and dried at room temperature. After drying, the cured layer is stable in high temperature and high vacuum, has no corrosion to metal and has proper adhesive force. A mold release that has been forged as a metal. Such as steel forgings, copper forgings, alloy forgings and die release agents for aluminum forgings. It can also be used as lubricant for extrusion profiles.
- Q: We mainly do brass processing, using graphite mold life is too short, please advise
- The longer service life of die material made of, but the price is higher.
- Q: Do the hot bending toughened film with graphite mould. How do you deal with the pressure on the surface?
- The easiest way to make coins naturally produce an oxide layer is to put clean, fat free coins into 10% of two sulfite solution for 10 to 20 seconds. Rinse off and dry with a soft cloth. Even after soaking two sulfite solution before copper will be issued a delightful bronze luster, and generally will not be corroded.
- Q: What is the die electrode?
- Red copper, or graphite can also be used as electrodes, with copper to fight things relatively light, and smaller particles, but the price is expensive, NC milling plus molding trouble.
- Q: Graphite used for mold, how much is the market price of one ton?
- Massive graphite more than 10 thousand per ton. Powder of high purity graphite more than 3000, powder electrode graphite more than 5000 per ton. This standard is difficult to grasp, you have to understand these materials Oh.
- Q: How to use and manufacture graphite mould in hot pressing diamond tools?
- For the same diamond tools, the hot press is lower than the cold pressing temperature, and the time is short.
- Q: Why do you choose the guide sleeve with bronze plus Shi Mozhu?
- Under dry friction conditions, we design a pre - formed synovial membrane on the surface of the bearing to ensure that the solid lubricant is transferred to the dual parts in the shortest possible time, and an effective solid lubricant film is formed
- Q: What are the differences between domestic and imported graphite? Who can tell me? What are they used in?
- The import of fine graphite particles, the surface of the products out of the relatively smooth, no large grains of sand hole, suitable for precision EDM, imported graphite can do bone and groove of 0.2-0.3, after the discharge is not easy.
1. Manufacturer Overview
Location | Shandong,China (Mainland) |
Year Established | 2010 |
Annual Output Value | US$2.5 Million - US$5 Million |
Main Markets | 20.00% South America 20.00% Eastern Europe 20.00% South Asia 20.00% Domestic Market |
Company Certifications |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | QINGDAO |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | 3-5 People |
Language Spoken: | English, Chinese |
b) Factory Information | |
Factory Size: | 5,000-10,000 square meters |
No. of Production Lines | 8 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | AVERAGE |
Send your message to us
Graphite Mold Suppliers Horizontal Continuous Casting Flat Mould
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 10,000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches