Glazed Porcelain Tile CMAX-600808
- Ref Price:
-
$7.80
/ m²
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 m² Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Our Glazed Porcelain Tile :
800*800 full glazed porcelain tile
Specifications of Our Glazed Porcelain Tile:
.Absorption rate:<0.5%
.Size:800x800mm
.Grade AAA
.CE&ISO9001
Features of Our Glazed Porcelain Tile:
1.Superfine powder twice hedging penetration imitates"pearl"effects and has a kind of flowing effect.
2.The waving of tiny lines randomly spreads together with powder flowing field form natural petaline"pearl"effect.
3.Mulit-pipe ground color and multi-pipe grains combine;superfine powder multiple soft spreading creates natural piled up grains that are clear in gradation with strong 3D effects.
4.Adopts a kind of top stain-resisting technology,to form a special dense protective layer on tile surface and effectively fill the pores left after polishing and penetrate into tile body to closely integrate with tile body,thus put an end to any super stains from penetrating in.
Test Report of Our Glazed Porcelain Tile:
TEST REPORT | ||||||
Item | Inspection Item | Unit | Provision of Standard | Test Result | Judgement | |
1
| SIDE | The deviation ,in percent of the average side for each tile from the work size. | mm | ±1.0 | +1.0 | Pass |
The deviation ,in percent of the average side for each tiel from the average size of the 10 test speciment . | % | ±0.4 | +0.01 | Pass | ||
Thickness | % | ±5 | +4.21 | Pass | ||
Straightness of sides | % | ±0.2 | +0.06 | |||
Rectangularity | % | ±0.2 | +0.05 | Pass | ||
Center curvature | % | ±0.2 | +0.05 | Pass | ||
Surfaceflatness | Edge Curvature | % | ±0.2 | +0.05 | Pass | |
Warpage | % | ±0.2 | +0.08 | Pass | ||
2 | Surface quality | / | A minimum of 95% of the tiles shall be free from visible defects that could impair the appearance of a major area of tiles | Pass | Pass | |
3 | Water Absorption(E) | Average value | ≤ 0.5 | ≤ 0.3 | Pass | |
Individual value | ≤ 0.6 | ≤ 0.5 | Pass | |||
4 | Breaking strenghth | N | Thickness ≥ 7.5mm,not less than 1300N | 2187.3 | Pass | |
5 | Modulus of Rupture | Average value | Mpa | 48.1 | Pass | |
Individual value | Mpa | 46.1 | Pass | |||
6 | Thermal shock resustance | / | Test method availuble after 10 times testing | Pass | Pass | |
7 | Mark(On the package) | Manufacturer logo or/and Origin | Pass | Pass | ||
Quality mark | Pass | Pass | ||||
surfacecharacter ,GL OR UGL | Pass | Pass | ||||
8 | lra | ≤ 0.5 | Pass | Pass | ||
Application of Our Glazed Porcelain Tile:
- Q: I am renovating, and have always loved white coloured tiles but am now starting to like these light coloured hardwood Tasmanian Oak Floorboards ....I have no idea on prices yet, what would cost more? and which one would look more beautiful??PS- i would NEVER put floating floorboards - they are cheap and nasty!
- Hardwoods are classic. You can never go wrong with hardwood floors as far as resell value. I renovated two years ago. We have a 1500 sq/ft home. We did tile in the bath and hardwoods everywhere else. My husband wanted to tile the kitchen as well but we were talked out of it due to labor costs. Cleaning tile grout is troublesome, sealing it is ineffective if you have food stains or mud or something. My tile floors are very pretty but I regret it. Be sure to get real hardwood with NO laminate at all. Some hardwood floors are real wood on the surface but laminated onto a synthetic bottom. Be careful that way. Things to ask before choosing: How many times can they be refinished? Are they glued or nailed? (Glued are crappy, nailing is much more effective.) How do I clean them? (I use a steamer, no chemicals.) Will my subfloor support the hardwood? (we had to install a new subfloor). Oak and Hickory are the best HARD woods to choose from.
- Q: Im trying to figure out how to apply (vct) Vinyl tile squares? Whats the best way to start a project? What adhesive do you use if any? Is it like ceramic with some form of grout? etc!
- OK! okorder if you have any questions
- Q: Does anyone know if I can lay ciramic tile over the dull worn out linoleum floor in my kitchen? I don‘t want to peel up the linolium because of the insane amount of labor it will take, and make the sub floor un even. any suggestions? Will tiles still stick to this material?Thanks!
- The problem with laying tile down is that if the floor is uneven at all (i.e., not perfectly flat) your nice new expensive ceramic tiles will BREAK! Best to find a place where you can look under the linoleum and see what's under it...but, all that said, that's why the PRO will go all the way down to the sub-floor, get everything nice and level, then put down 1/2 cementitious backer-board (1/4 for walls, 1/2 for floors) and then lay the tile. That way, it can be worked out in advance whether/if there will be a height difference between the new tile floor and any floors in rooms adjoining it...otherwise, it's oops, I tripped again. Spend the time, effort and money and do it right.
- Q: What‘s the difference between tile mastic tile adhesive? I was told to paint the wall w/paint primer first then use tile adhesive rather than tile mastic to apply tiles on damaged green board around my jaccuzzi tub for a quick fix. The green paper peeled off when removing the old tile exposing the brown cardboard stuff.
- Mastic Tile Adhesive
- Q: I purchased a house that came with a pool. The drawback is that tile is covering the outside of the pool which makes it extremely slippery for my family and guests. What a good solution to this challenge? Lastly, what‘s going to be the best and cheapest alternative to this? Someone mentioned to me that the rubbery mats they use at restaurants works very well, but I need to know the best and cheapest alternative.Suggestions?
- If your swimming pool area has not been treated it probably is a liability because untreated areas are slippery. The risk increases dramatically when the tiles are wet and that’s when slip and fall accidents happen. Many accidents are happening on a daily basis where adults and children are falling as a result of slippery, wet surfaces that are being walked on. Swimming pools should be a fun place but this has to be balanced with safety. Whether you are an adult or a child there is significant danger associated with tiling around pools!
- Q: just had a tile floor laid and i noticed some were higher than the one next to it in about 6 tiles. my husband says every house will have those. does yours?
- No, my tile guys spent half the day leveling the concrete before laying the tiles. They sanded down the high spots and used filler in the low spots. My floor was perfectly level before they ever layed the first tile. They would slide a 8' straight edge over the floor many times look for discrepancies.
- Q: I‘m tiling a shower in a small bathroom, should I go with ceramic or something like vitreous? Any experience welcomed greatly!!
- I would use ceramic tile. It comes in a variety of sizes and colors and is relatively easy to put up. It is also very easy to clean. If you haven't tiled a lot before, get self spacing tiles. Then you do not need to mess around with tile spacers. This will speed up your job. Also, if you have never tiled before, check with your local hardware store. Some places like Home Depot and Lowe's will offer free tiling classes. HTH!
- Q: I was told that a granite tile countertop is a cheap way to upgrade countertops. can I install granite tile over the existing laminate countertop? do I need any to install any material between the laminate countertop and the granite tiles? thanks
- Granite Tile Countertop Over Laminate
- Q: I just finished my bathroom but when i used the oil based kilz there was a little spray back that landed on the tile floor.
- Depending on the type of tile you might be able to use a sharp knife (exacto or paring knife) and gently remove the spots. If you have any kind of ceramic tile that would work (in my experience) except perhaps on the grouted areas. If you have grout and the Kilz is in/on the grout you might have to actually scrape some of the grout off and then reseal the grout. Good luck. It's laborious work but it should work. If you have linoleum tile I wouldn't do that because it might remove the finish. The next time you go to the paint dept. at the store ask them how to do it if you haven't solved the problem
1. Manufacturer Overview
| Location | Guangdong, China |
| Year Established | 2005 |
| Annual Output Value | Above US$ 90 Million |
| Main Markets | 8.00% Mid East 15.00% Northern Europe 15.00% North America 12.00% Eastern Asia 10.00% Africa 9.00% Eastern Europe 20.00% Southeast Asia 4.00% Oceania 3.00% Western Europe 2.00% Southern Europe Mid East; Eastern Europe; North America |
| Company Certifications | ISO 9001:2008；CCC,CE |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Foshan,China |
| Export Percentage | 41% - 50% |
| No.of Employees in Trade Department | 20-30 People |
| Language Spoken: | English; Chinese; Spanish |
| b) Factory Information | |
| Factory Size: | Above 100,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | High; Average |
Send your message to us
Glazed Porcelain Tile CMAX-600808
- Ref Price:
-
$7.80
/ m²
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 m² Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
