Glazed Porcelain Tile Cement Stone Series CS60A/60B
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile Cement Stone Series CS60A/60B is one of the most popular color of Glazed Porcelain Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Glazed Porcelain Tile,
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
4. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
5. What exhibition we joined?
1). Canton Fair (every year)
2). Dubai Big 5
6. What's the characteristics about porcelain tiles and glazed tiles? Which one
more slippery, more aesthetically pleasing and easy to clean?
Glazed tiles are colorful, the effect is rather diverse, stain-slip, abrasion resistance but worse than the porcelain tiles. Long-term use may wear a large surface; porcelain tiles have the higher degree, long hard wear surface. Good performance and stable cleanup (before playing the best times to use the wax to improve stain resistance).
- Q: anyone familiiar with laying tile flooring? never done it myself but i just bought a house and want to do it. is there anything an amature would mess up?? any info would be great
- It is not difficult as long as you properly prepare for the job. If it is a single room check if it is square and using a chalk line mark a line you will start with. Use the most exposed area of the room to get perfectly straight line of tiles. Once you start right the rest is just repetition. Another area of concern is what are you putting the tile over. Is is a concrete slab? If so just make sure it is does not have any areas that are elevated. If it is wood sub-floor definitely use backing like wonder board or something like that. Depending on the size of your tiles you need to choose a spacer size. Your retailer will help you with that. Another issue is your connection of tiles to the wall. Do you have a baseboard? If possible remove the baseboard and reapply it after you are done. It will look better and you will have easier time laying the tile. Consider getting a DVD on laying tile, I am sure you retailer can sell you one for just a couple of bucks. Good Luck!
- Q: We laid tile in our shower and I used too much grout. Now I need to know how to get the grout lines even without damaging the tile. Any help would be appreciated.
- thats a problem, grout is cement , it will take something thats abrasive, like a wheel grinder, ? got me stumped i,v been at this for 50 yrs, never have figgered that one out,
- Q: i need to lcut a circle 36x36 inch on floor tile thats about 1/2 inch thick. can dremel cut this? thanks
- Depends on the exact type of tile. Some porcelain and other hard bodied tile you ll burn the bits and possible the motor itself. If it was a smaller area you had to cut out, it would possible work. Some satillo tiles you could do this with some extra bits , since they are a softer bodied tile. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q: My kitchen floor tile has a number dings or chips caused by something heavy falling on them. Is there a way to repair these without having to remove/replace the entire tile?
- Depends on how bad they are. Sounds like you have an very inexpensive tile on the floor or it would not have all the chips/dings. A cheap temporary fix would be to find a paint to match and just touch up. If you're renting, just try that. If you own, you could do that temporarily while you save up. When you replace though, make sure you get a good quality porcelain tile.
- Q: We recently bought a house and the bathroom has tile everywhere (including the ceiling). What is the best, easiest, fastest way to get tile up. The experiences we‘ve had with tile is that it just breaks up in little pieces. Any suggestions?
- If it where on drywall, I would take off the drywall - gut down to the studs. If its on plaster, get a wide chisel and hammer away...Sometimes a 6 drywall knife works to srape off tile then you have some drywall repair- skim coating. Hopefully, for your sake, the tile is on drywall - a newer home...
- Q: We just bought a house and the bathroom tile looks terrible. Its not in bad shape, I just dont like the ugly floral pattern. Since we had to spend a lot of money on other projects in the house we dont have a lot to spend on re-tiling, The bathroom is small, about 5ftx4ft of floor, so I thought peelstick would be a good option. The tiles currently on the floor are peel and stick, should I remove them all before I apply the new ones? or can I just give them a good cleaning and lay the new tiles over them?
- If the old tiles are not embossed, you can put down new peel n stick with no need to remove the old ones. If they are embossed, you might want to sand the pattern down or pour on a leveler. And I've had peel n stick in both bathrooms for almost 20 years, and they still look as good as new. They were installed over asphalt tiles.
- Q: We had glass tile installed in our kitchen and it looks wavy. Our installer said it was an optical illusion which I disagree with. I noticed it as it was being installed and that he did not use spacers. Wouldn‘t that have allowed the tiles to move before they were grouted?
- Wavy Glass Tile
- Q: We have a two sink bathroom set up would like to replace the counter-top with a homemade tile counter-top - we are pretty handy but have not dealt with tile before - and before I ask my dad for help I thought why not check out yahoo answers. Thanks! :)
- Depending on what the counter top is now you will need to sand it down and score it (make long scratches in the surface to hold the grout). Next you want to start with the edges and then work your way in. Lay the grout and set the tile. Make sure you get small bumpers to put in between the tiles to keep the spacing even. Make sure you have a way of cutting the tiles also to fit the uneven spaces.
- Q: I would appreciate a double check on this problem. I believe I‘ve saved myself a lot of cutting, but I just want to make sure. My shower is 59 inches wide. My tile is 4.25 inches wide and tall. (square)My spacers are .25 inches wide. The middle point of my shower 29.5 inches. If I move my center line to the right or left by 2 and 1/8 inches I should be able to cover the entire width with 13 tile IF I allow for a 1/8th inch addition in each corner. Is this correct?
- too much thinking . . but thanks for the 2 points . . .really . . you are being too analytical here . . let your tile installation crew do it for you . . tell them what you want . . . but if you are so fussy that all must be dead on perfect . . good luck . . because you may still need to float the walls . . and walls are usually not square and ceilings are oft crooked as well . . sometimes you just need to fudge a bit and follow the line that everyone will see.
- Q: I want to install tile over laminate. How do I do this?
- you cant. the laminate will not adhese to the tile. trust me, you should just rip up the laminate. it can be fun, and there is most likely ply wood underneath it. this will make your update much more pleasant and permanent and will also be very easy. good luck with things :-)
Send your message to us
Glazed Porcelain Tile Cement Stone Series CS60A/60B
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
