Gasoline Sewage Pump for Submersible Using with WQ Series
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Gasoline Sewage Pump for Submersible Using with WQ Series
1.Structure of Gasoline Sewage Pump Description
Gasoline Sewage Pump of sewage basic dormant,along with sewage pumping,sewage things gradually deposition in the bottom of the pool. But the sediment could not force with sewage went out at the pumps normal operation of inlet water alone.So the deposit is more and more at bottom of pool,which eventually led to affect normal work of pump.Engineering clean the sewage pool regularly ,so as to avoid waste of human and material resources.We produce this kind of sewagepumps,which is mounted mixing impeller at the the bottom of pumps,along with the rotation of pump, driving the impeller highspeed mixing.Thus, stir up the deposit of bottom, mix with water, and flow out with water.Also can match with coupler,make more quick and convenient installation and maintenance.
2.Main Features of the Gasoline Sewage Pump
• Compact structure, good appearance, low construction
•Operation stably, same inlet and outlet
•Convenient installation and maintenance
•Parallel connection and have many models to be chosen for difference flow rate and head
•Horizontally and vertically installation as different pipeline system
3.Gasoline Sewage Pump images
4.Gasoline Sewage Pump Specification
Model | Capacity | Head | Speed | Efficiency | Power | Outlet |
Q(m3/h) | H (m) | n(rpm) | η (%) | Kw | mm | |
40WQ-12-15-1.5 | 12 | 15 | 2900 | 48% | 1.5 | 40 |
50WQ-10-10-0.75 | 10 | 10 | 2900 | 54% | 0.75 | 50 |
50WQ-15-15-1.5 | 15 | 15 | 2900 | 51% | 1.5 | 50 |
50WQ-15-20-2.2 | 15 | 20 | 2900 | 51% | 2.2 | 50 |
50WQ-17-25-3 | 17 | 25 | 2900 | 53% | 3 | 50 |
50WQ-20-7-0.75 | 20 | 7 | 2900 | 62% | 0.75 | 50 |
50WQ-22-20-4 | 22 | 20 | 2900 | 69% | 4 | 50 |
50WQ-25-10-1.5 | 25 | 10 | 2900 | 67% | 1.5 | 50 |
50WQ-25-32-5.5 | 25 | 32 | 2900 | 49% | 5.5 | 50 |
50WQ-40-15-4 | 40 | 15 | 2900 | 76% | 4 | 50 |
50WQ-40-30-7.5 | 40 | 30 | 2900 | 62% | 7.5 | 50 |
65WQ-25-15-2.2 | 25 | 15 | 2900 | 52% | 2.2 | 65 |
65WQ-25-28-4 | 25 | 28 | 2900 | 58% | 4 | 65 |
65WQ-37-13-3 | 37 | 13 | 2900 | 60% | 3 | 65 |
80WQ-29-9-2.2 | 29 | 9 | 2900 | 48% | 2.2 | 80 |
80WQ-40-7-2.2 | 40 | 7 | 2900 | 50% | 2.2 | 80 |
80WQ-40-15-4 | 40 | 15 | 2900 | 57% | 4 | 80 |
80WQ-43-13-3 | 43 | 13 | 2900 | 65% | 3 | 80 |
80WQ-50-10-3 | 50 | 10 | 2900 | 72% | 3 | 80 |
80WQ-50-25-7.5 | 50 | 25 | 2900 | 56% | 7.5 | 80 |
100WQ-50-22-7.5 | 50 | 22 | 1450 | 63% | 7.5 | 100 |
100WQ-50-35-11 | 50 | 35 | 1450 | 62% | 11 | 100 |
100WQ-65-15-5.5 | 65 | 15 | 1450 | 59% | 5.5 | 100 |
100WQ-70-7-3 | 70 | 7 | 1450 | 75% | 3 | 100 |
100WQ-70-22-11 | 70 | 22 | 1450 | 70% | 11 | 100 |
100WQ-80-9-4 | 80 | 9 | 1450 | 62% | 4 | 100 |
100WQ-80-20-7.5 | 80 | 20 | 1450 | 71% | 7.5 | 100 |
100WQ-100-7-4 | 100 | 7 | 1450 | 75% | 4 | 100 |
100WQ-100-15-7.5 | 100 | 15 | 1450 | 70% | 7.5 | 100 |
100WQ-100-22-15 | 100 | 22 | 1450 | 61% | 15 | 100 |
100WQ-110-10-5.5 | 110 | 10 | 1450 | 67% | 5.5 | 100 |
100WQ-110-15-7.5 | 110 | 15 | 1450 | 75% | 7.5 | 100 |
150WQ-130-30-22 | 130 | 30 | 1450 | 69% | 22 | 150 |
150WQ-140-7-5.5 | 140 | 7 | 1450 | 79% | 5.5 | 150 |
5.FAQ
① What is your product range?
Centrifugal pump, slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, single stage
pump, double suction pump, industry pump, oil pump, paper pulp pump, mud pump, self-priming pump, pipe
water pump, boiler water pump, etc.
② Are you a manufacturer?
Yes, we have been in manufacturing and marketing industry centrifugal pump over 20 years.
③ What information should I let you know if I want to get a quotation?
Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also
provide the pump model you are using now, price will be calculated as per the pump model, if not, we willrecommend relevant product for reference.
- Q:How to adjust the flow of piston pump?
- The oil pan with oil liquid through the suction port and the piston cylinder; from 180 degrees to 360 degrees, the piston cylinder volume decreases, so the oil liquid in the pan with oil discharged from the outlet of the liquid. The pump works continuously as long as the drive shaft rotates.
- Q:What are the application areas of pumps?
- Water pump has different uses, different transmission liquid medium, different flow, lift range, therefore, its structure form is not the same, the material is also different, summed up, can be roughly divided into:
- Q:What should be used to pay attention to the use of mechanical pumps?
- When opening the pump, first close the outlet valve, lift the pressure, then open the outlet valve again, pay attention to the flow of the motor.
- Q:What does "anti pump" mean in pump operation?
- The pump again is the pump, the theory is the plugging problem can be solved, but if you are against the pump after pump has been plugging serious, and pump has been unable to solve the plugging problem, finally the worst solution is a split pipe, if the situation under enormous pressure will only exacerbate the plugging
- Q:What are the basic technical parameters of the pump?
- Two, pump head H head is the unit weight of the liquid pump pumping from the inlet of the pump (pump inlet flange) to the outlet of the pump (pump outlet flange) energy value. Effective energy is a Newtonian liquid through the pump unit is obtained. The N m/N=m, the height of liquid column pumping liquid. Habits referred to as meters. Three, the pump speed is n RPM pump unit time revolutions, represented by the symbol n, the unit is r/min. four, the pump NPSH NPSH NPSH is also called net positive suction head, said main parameters of cavitation performance. Cavitation has been used a h power of five, the power of the pump. And the efficiency of the pump is usually refers to the input power, which is the prime mover on the pump shaft power, it is also known as the shaft power, denoted by P;
- Q:I would like to ask, constant pressure pump set pressure 20Mpa, the actual load is 15Mpa, then the constant pressure pump outlet pressure? If it is 20Mpa, then where is the loss of 5Mpa? If 15Mpa, the constant pressure pump 20Mpa how to understand? In addition, the constant pressure pump pressure is defined when the flow began to reduce the point, or a sharp drop in flow after the point?
- 15MPa. 20MPa means that if you enter the 20MPa, the variable mechanism will work, and the flow at this time automatically matches the load. 20MPa used to supply the fuel by maximum displacement.
- Q:Pneumatic diaphragm pump compressed air pressure is 4 kg, the discharge pressure is how big?
- Pigment pressure is less than 0.4mpa,About 0.3. Go up.As the pump diaphragm is in the middle of a connecting rod, equivalent to the cylinder cavity, the pressure will be reduced; and because of the loss of pigment tube pressure will be reduced.
- Q:Rotary vacuum pump does not meet the requirements of vacuum, what are the reasons?
- (1) pump connected outside pipes, containers, pipes, joints and other leakage test instrument, large leakage, rotary gas plug exhaust sound big, and the gas and oil mist discharge, should find leakage cancellation.(2) the assembly of rubber of intake pipe is not proper, damage or aging should be adjusted or replaced.(3) plug hole, the vacuum degree can be decreased, put the oil, remove the tank, loosen the nozzle plate, pull out the oil inlet nozzle, dredge oil hole, try not to use cotton wipe parts.(4) the vacuum system has serious pollution, including containers, pipes and so on. It should be cleaned.(5) the spring of the vane is broken and should be adjusted.
- Q:The main factors affecting the performance of centrifugal pumps
- The specific speed is deduced by the law of hydraulic similarity, and the similarity between the hydraulic characteristics of centrifugal pumps is similar. In centrifugal pumps, the specific speed is often interpreted as: the pump works at the highest efficiency, generating a lift of LM, a flow rate of 0.075m, and the power consumed by the /s at 0. 735kW
- Q:Working principle and diagram of axial piston pump with pressure compensation variable
- The size of the outlet flow pressure compensated variable displacement pump with outlet pressure of approximately in a certain range according to the constant power curve. When the pressure oil from the main part of the channel (a), (b), (c) into the inferior vena cava (d) variable shell, oil by the channel (E) respectively into the channel (f) and (H), when the spring force is greater than the oil (f) into the lower end of the piston ring servo hydraulic thrust area when the oil liquid (H) to the chamber (g), push the variable downward movement of the piston, the pump flow increases. As for the hydraulic servo piston end thrust force ring shaped area is greater than the spring when the servo piston moves upward, blocking channels (H), the (g) (I) through the cavity of the oil cavity pressure relief, at this time, the piston moves up, the variable head angle decreases, the pump flow rate decreases.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Gasoline Sewage Pump for Submersible Using with WQ Series
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches