FORKLIFT CATEGOY Hand Stacker--SFHXX16-A
- Ref Price:
-
$8,000.00 - 20,000.00
/ unit
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Hand Stacker
Double-Acting Pump
It’s design and small turning radius makes it easier to make sharp turns.
Controllable direction handle
Has a dual pump for easier lifting.
Conforms to EN1757-1
Top quality hydraulic pump & cylinder
Protection device for steering wheel & safety guard for load roller
a stacker has three basic movements:
· Luffing: This is vertical movement. Stackers use either a winch mechanism with metal wire, or hydraulic cylinders, generally two. Winch mechanisms are highly reliable compared to hydraulic actuators and remain widely used, particularly in large stackers.
· Travelling: The stacker moves on a rail track, which may be broad or narrow gauge, enabling it to move around the stockyard as required. For this purpose, traction motors powered by direct current (DC) are connected bybevel gears to between 12 and 22 wheels. For manual control, all the controls are in a controller's cabin above the boom conveyor or boom. Modern stackers can be controlled remotely.
· Slewing: This is rotation of the stacker around its central axis to align or place the stockpile where required. This works mostly by a slew pinion that rotates around a slew base. This type of gear assembly is called a sun and planet gear. The axles may be multiple and are driven by DC-powered axle motors which transmit the torque via bevel or helical gears.
1KG=2.2LB 1INCH=25.4MM
Model | SFH0516-A | SFH1016-A | SFH1016-C | SFH1516-A | |
Capacity Q | Kg | 500 | 1000 | 1000 | 1500 |
Load center c | mm | 600 | 600 | 400 | 600 |
Fork length l | mm | 1150 | 1150 | 800 | 1150 |
Fork Width b5 | mm | 560 | 560 | 255~800 | 560 |
Lifting height h3 | mm | 1600 | 1600 | 1600 | 1600 |
Minimum turning radius wa | mm | 1540 | 1590 | 1400 | 1590 |
Lifting speed | mm/sec | ≥20 | ≥20 | ≥20 | ≥16 |
Lowering speed | mm/sec | Adjustable | |||
Overall length l1 | mm | 1650 | 1650 | 1280 | 1650 |
Overall width b1 | mm | 630 | 680 | 840 | 690 |
Overall height h1 | mm | 1970 | 2020 | 2020 | 2070 |
Outer dia. Of the front wheel | mm | 80 | 80 | 80 | 80 |
Outer dia. Of the rear wheel | mm | 150 | 150 | 210 | 150 |
Net Weight | Kg | 160 | 223 | 220 | 150 |
- Q: What is the safe speed of the forklift truck
- Forklift truck speed can be set, internal combustion forklift usually have speed limiter, domestic forklift factory basic restrictions in 18-20 km/h, battery forklift truck speed can be set according to the request of the buyer the speed of the Settings for each mode.
- Q: What are the procedures for buying a forklift?
- legal representative (or head) id card (such as entrust to handle, needs to submit a power of attorney at the same time the original and one copy each of the client id photocopy; id photocopy should I signature); The registration form of the special equipment (two copies of the original);
- Q: What certificate is required to train the forklift
- A copy of the id card, two on the back. A copy of the diploma, There are four photos of the white background, the body check. The application form.
- Q: What are some of the common failures of forklifts?
- Forklifts cannot be started with the following conditions: 1, the battery without electricity Failure of starter The key switch is bad 4, the oil pump does not supply oil 5, there was no oil tank 6, no oil 7, the crankshaft lock The engine was completely scrapped
- Q: After the forklift is killed, it will stall!
- The steering pressure is too high. 2, it's normal to hold off the fire.
- Q: Is it dangerous to drive a forklift?
- Of course there will be, the forklift truck is also a big guy, hey hey. But the operator's technology is good, and there is nothing wrong with concentration
- Q: Is a forklift and a hug a car
- To lift a car is to add a harness to the forklift truck Assemble in front of the door For holding the paper roll The handle and operation mode of the holding clamp are the same as the operation of the fork in the ordinary forklift truck
- Q: What do you need to do to get a forklift license from the quality technology supervision bureau? Is there a practical test for the forklift truck?
- The driver of forklift has written test and practice exam, which is divided into two major categories, the pile test and the road test. There are different ways of testing in the area. Some areas are the actual driving forklifts, the actual operation of driving forklifts, the inspection of the rods, the line, the start, the fork, etc. This reflects the management of a region.
- Q: The forklift is limited in the factory area
- 5KM/H, the water on a forklift, people go beyond 5KM in an hour. A bit of efficiency is gone. In the case of safety, no matter, the maximum of 20KM/H, the maximum of 15KM/H. This is the top speed of a small tonklift truck.
- Q: A manual forklift oil leak, what if you can't get up?
- After the analysis, I found out that the reason for this manual forklift oil leak is probably the most likely: multiplexing to the valve body leakage. The body leakage affects the system operation, allowing forklifts to rise and incline. When the valve stem is aged or damaged in the o-ring between the body, the oil will flow down the stem of the valve, causing the body to leak oil. In case of this failure, simply replace the o-ring seal.
Send your message to us
FORKLIFT CATEGOY Hand Stacker--SFHXX16-A
- Ref Price:
-
$8,000.00 - 20,000.00
/ unit
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
