Maple Wood Plywood - 0.3mm EV Poplar Core Veneer Good Quality Wood Veneer Supplier
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Engineered Veneer Wood:
Engineered Veneer Unreal Color Wood for Door Skins and Plywood
1.Thickness:0.3mm-0.6mm
2.Grade:furniture,door and panel grade
Specification of Engineered Veneer Wood:
(1)Regular Size: Width640mm*Thickness 0.30-0.6mm *Length 2500mm
(2)Application: Can be used in interior decoration,furniture and music equipments , plywood or MDF , door etc
(3)MOQ: 500m2
(4)Packing:Wood pallet covered with plastic and fixed by iron belt
(5)Terms of payment: TT, LC at sight
(6)Delivery date:within 7—10 days after order confirmed. Your special order is also welcome
Other Information of Engineered Veneer Wood:
Dimension | 2 x 8 feet/2.5mx64cm
| |
Thickness | 0.5mm/0.3mm | |
Grain | quarter cut/crown cut | |
Grade | Good quality | |
Moisture | To be 8%-10% at time of shipment. | |
Quality | Clear grain, uniformity color, no chew silk, no any defect | |
Usage | High grade Furniture, Restaurant and hotel decoration. Decoration board. Be pasted on MDF, Plywood. Other wood product, ect. | |
Package | Wooden pallet packing | |
Quanity fits in container | 20’GP | 35000m2 |
40’GP | 65000m2 | |
40’HQ | 75000m2 | |
MOQ | No requirements or can place a sample order to test our quality. | |
Delivery time | 5-15 days on receipt of deposit. | |
Price terms | EXW, FOB, CIF, CNF. | |
Payment terms | By T/T, 30% for depoait and 70% is paid before shipment or after goods' inspection | |
Process of Engineered Veneer Wood:
Log Selection
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.
Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.
Drying
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.
Gluing
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.
Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.
Packing of Engineered Veneer Wood:
- Q:How do I determine if plywood contains formaldehyde?
- because it is often hidden behind the wood epidermis and must be carefully viewed, usually in seams and drills Of the place can be seen clues
- Q:According to the different composition of the glue, for the construction of plywood with the following types of glue
- E0 is the highest environmental rating. E1 grade glue to do the plywood can be used directly for the interior.
- Q:What is a joinery board?
- Blockboard core board should be the same species or similar properties of the tree species, water content of 6 to 12%. Core width is not greater than three times the thickness, do not allow a larger crack, holes and so on
- Q:What are the further processing of plywood?
- Resin Treated Plywood Paste Plywood Plywood with resin impregnated or impregnated with other methods.
- Q:Now the market prospects for plywood
- regulate export order. With the expansion of China's infrastructure construction and the strengthening of the development of the Midwest, plywood market has great potential.
- Q:Class I resistant weather plywood Class II water resistant plywood
- slab molding (mixing resin and additives pavement), under hot pressure, so that cellulose and Hemicellulose and lignin plasticized to form a plate.
- Q:Multilayer board and plywood difference
- The multilayer board is usually arranged symmetrically on both sides of the center or core.
- Q:How is the current market outlook for plywood?
- A total of 4,732,364 thousand yuan, an increase of 70.26% over the same period last year.
- Q:Does plywood contain formaldehyde?
- Home plywood is a commonly used material. Plywood is the wood shavings and urea formaldehyde resin pressed together
- Q:Why plywood is cheaper than solid wood
- and then made of adhesive glue from the three or more layers of plate-like material, usually with odd-level veneer, and the adjacent layer of veneer Of the fibers are perpendicular to each other
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Maple Wood Plywood - 0.3mm EV Poplar Core Veneer Good Quality Wood Veneer Supplier
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
