CPC(D) Diesel Forklift Lifting Capacity,
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Feature
The overall forklift adopts to unique appearance design, which conforms to the newest appearance design trend with fluent and the feeling of dynamic. Minor diameter steering wheel greatly improve operating comfort, which also can reduce fatigue strength of operator. It relies on hydraulic shifting and electronic steering. Also, it is light and flexible. The frame structure is optimize, which can reduce the overhang front. Lifting capacity of the forklift is in the leading comparing with the same industry. In the meanwhile, it optimizes the layout of overall forklift. The center of gravity is back moved, which strengthens it operating stability. Comparing with the original forklift, the coefficient of stability of overall forklift promotes 20%. The intake pipe of engine adopts to high position autonomous channels, which can prevent dust intake efficiently.
It also equipped with large volume pipe radiator to optimize heat dissipation channel and improve oil temperature and water temperature, which can promote the heat dissipation ability of the forklift. The forklift adopts to reinforced YQXD100 gearbox. It optimizes the transmission ratio and widen torque output range. It can enhance traction in the meanwhile it can increase the speed when it is in light load. The main stress component adopts to finite elements analysis, which can ensure the structural strength and rigidity. In the meanwhile, it increases more than 15% lifting capacity of the forklift. The moving parts adopts to motion simulation, which can ensure all kinds of stable and smooth mechanisms traveling. The hydraulic system adopts to dual-pump system with front valve confluence and stable veering shunt. System motion is unique and stable. All hydraulic ram adopts to international brand sealed component with a long service life and impact resistance.
The braking adopts to vacuum servo, which is soft and reliable. Domestic famous brand turbocharged engine is equipped with powerful drive and energy conversation and environment. Combining famous brand hydraulic shift gearbox with drive axle, reasonably, it has the superior traveling performance. It adopts to split side idler structure. Stress of portal is reasonable with stable traveling. Equipped with telescoping transmission shaft, it can remove the additional angle accelerated speed, automatically, which caused by the change variation of transmission. It can enhance the transmission shaft service life. With the unique frame physical design and the connection between engine and rear axle, rear forklift, it avoids the flaw owing to lacking rigidity in industry. In the meanwhile, it can reduce the shaking of the forklift. Inner storage board adopts to wholly massive structure, which can strengthen rigidity , meanwhile, it can enhance usability. It cab reduce welding deformation.
Model | CPCD20 | CPC20 | CPCD30 | CPC30 | CPCD50 |
Load Rating(Kg) | 2000 | 3000 | 5000 | ||
Load Center(mm) | 500 | 600 | |||
Lifting Height(mm) | 3000 | ||||
Free Lift Height (mm) | 100 | ||||
Mast Tilt Angle α/β(deg) | 6/12 | ||||
Overall Length(mm) | 2476 | 2687 | 3570 | ||
Overall Width(mm) | 1149 | 1226 | 2000 | ||
Frame Height(mm) | 2110 | 2125 | 2495 | ||
Ceiling Height(mm) | 2100 | 2090 | 2460 | ||
Fork Dimensions L*W*T(mm) | 1070*100*40 | 1070*125*45 | 1200*150*50 | ||
Front Clearance(mm) | 462 | 477 | 610 | ||
Back Clearance(mm) | 414 | 510 | 760 | ||
Front Tread(mm) | 970 | 1000 | 1490 | ||
Back Tread(mm) | 970 | 1520 | |||
Wheelbase(mm) | 1600 | 1700 | 2200 | ||
Minimum Turning Radius(mm) | 2185 | 2400 | 3250 | ||
Ground Clearance(mm) | 145 | 155 | 200 | ||
Maximum Travelling Speed(FL/NL,Km/h) | 19/20 | 26/28 | |||
Maximum Lifting Speed(FL/NL,mm/s) | 530/500 | 450/430 | 330/450 | ||
Maximum Tr-active(FL/NL,Kn) | 14/9.8 | 53/36 | |||
Maximum Climbing Speed(%) | 20 | ||||
Whole Weight(Kg) | 3440 | 4400 | 8100 | ||
Front Tire | 7.00-12-12PR | 28x9-14PR | 8.25-20-14PR | ||
Back Tire | 6.00-9-10PR | 6.50-10-10 | 8.25-15-14PR | ||
Engine Model | XinChai4D27G31 | ChaoChai6102 | |||
Rating of Engine/Rotate Speed(Kw/r.p.m) | 36.8/2650 | 81/2500 | |||
Maximum Torque(N.w/r.p.m) | 156/1700-1900 | 353/1650 | |||
Minimum Fuel Consumption Rate Under Full Load(g/Kw.h) | 238 | ||||
Total Cylinder Capacity(L) | 2.67 | 5.785 | |||
Gear(front/back) | 1/1 | 2/2 | 1/1 | 2/2 | 2/2 |
Fuel Capacity(L) | 60 | 175 | |||
Hydraulic Tank Capacity(L) | 60 | 130 | |||
Advantage
l The forklift has a novel appearance modeling, roomy operation place and widened view.
l The forklift conforms to ergonomic operational devices. The operational capacity of complete machine is light.
l The operation of the forklift is smooth and reliable with efficient working.
l The advantage of the forklift is reasonable user-center design of the complete machine, strong universality, great stability and better overload capacity.
l The engine satisfies the requirements of National III emission standards. Also, starting speed is fast, fuel-efficient and low noise.
l Unitary welding frame, it is sturdy and durable.
l High-level Quality (the largest forklift manufacturer in China)
l All spare parts our forklift use must standard at least two technical tests, to make sure reliability.
LOW Price (Mass production)
l We are large forklift manufacturer, mass production largely lower our production cost.
l Although our price of forklift is lower, we have the high quality.
l The largest forklift exporter, Selling to more than 150 countries and regions
l As the largest forklift exporter, we have sold our forklifts to more than150 countries and regions, every year we export many unit to the world market.
Reliable After-sale Service
l Our Group only choose long cooperation suppliers, this greatly avoids the risk of breakdown in parts supply chain.
l With years' development, we have established mature dealership and service shop in more than 150 countries and regions. It's very easy to buy our spare parts and get maintenance cost in your local. While other brand can't do this.
l How low our forklift is, you can save much in maintenance cost in the future.
- Q: What is the difference between a forklift and a forklift?
- Get on the bus are all used to open 10 minutes A tube is two joysticks A pipe fork tilt But forklift truck is turned to the small ground to don't like a forklift truck to advance have to play to forklift to unload again two or three meters in front of the steering
- Q: There is no clutch for the electric cylinder forklift
- Battery forklift truck is no clutch, only the brake and accelerator accelerator, he's moving back done by several parts, the first thing to have a reversing switch control forward retreat, when switch forward, forklift electric controller, receive the signal, after the circuit conversion in the reactor, open the advance circuit, at the same time the throttle to adjust output voltage to the electronic control unit, adjust the voltage of electric controller output to the motor, done by the motor to go forward, when you back in front of the control is the same, just electric controller in the output to the excitation current and voltage of motor is opposite. The electric field in the motor changes and the motor changes. And then I fell back.
- Q: The forklift should be put on record
- According to party policy, we need to deal with it. For special equipment parts will know that you have a forklift truck, after the time limit will mot, found unqualified is money, of course, it is not reported to the also don't know what you are using a forklift.
- Q: What is the difference between the series of internal combustion forklifts
- Together there are K, alpha Ⅱ H2000, G series, the K series 2-5 tons, alpha Ⅱ system for alpha upgrade is usually 4 -- 10 tons, the two series car belongs to the common sense of the civilians, high quality and low price. H2000 series for 1-20 tons, G series is 1-3.5 tons, 20-46 tons, belongs to the high-end car, each configuration includes the engine, transmission ratio K, alpha Ⅱ series, especially G system for the latest research and development products, and configuration of imports, the price also very similar to the imported cars, belong to large and medium-sized enterprises and export models.
- Q: Whether there is a national standard or standard for the charging of forklift truck in the factory
- The charger must be equipped with two fire extinguishers. 6 above, battery and battery must be kept clean, dry, no residue cover need and can't damage the battery connection in place, the battery with the charging cable can't kink and damage, insulation parts can't be..
- Q: The basics of driving a forklift
- Note the position of the gearshift and the reverse pole. The speed of the forklift truck is slow, usually only one and two blocks, and a reverse gear is specially set up. When driving, first hang in the reverse gear, switch the forklift to move forward or back, then push the shift lever to 1 stop and start smoothly. The forklift does not stop changing direction, causing damage to the transmission.
- Q: Why is the front wheel of the forklift narrow
- Because the main function of the front wheel is load and drive, the force is greater. The rear wheel mainly turns to the effect, the force is smaller.
- Q: What do you need to do to get a forklift license from the quality technology supervision bureau? Is there a practical test for the forklift truck?
- The driver of forklift has written test and practice exam, which is divided into two major categories, the pile test and the road test. There are different ways of testing in the area. Some areas are the actual driving forklifts, the actual operation of driving forklifts, the inspection of the rods, the line, the start, the fork, etc. This reflects the management of a region.
- Q: About the safety of driving forklifts
- Keep in mind that the goods are overloaded and don't try, or you will be fired by your boss. Insert the insertion of the teeth, the distance between the teeth, the higher the load, the lower center of the drive.
- Q: What oil do you use for forklift
- Go to a regular agent or service center because there are fake products in the market and avoid unnecessary losses.
Send your message to us
CPC(D) Diesel Forklift Lifting Capacity,
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
