Balance forklift with 4 supporting points
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Rated laoding:1.5T
Lifting height:3000MM
Free lifting height:150MM
1.Specially common in warehouses and other large storage facilities;
2. forklifts serve the needs of various industries.
3.Some allow the operator to sit while driving and operating the machine; others require the operator to stand.
4.Some are powered by onboard batteries; others use different kinds of fuel.
5.Regardless of the type, however, all forklifts perform the same basic functions.
Forklifts are one of the smallest drivable pieces of machinery. They are compact enough to fit in relatively small areas and are easily maneuverable to turn in various directions. Depending on the forklift, many can handle carrying loads up to 35,000 pounds. Smaller forklifts may only have a 3,000 or 5,000 pound capacity, however.
There are three main types of forklifts, each used for different main purposes.
Internal combustion forklift are generally used outdoors because they are powered by gasoline, diesel, compressed natural gas or propane.
This type of forklift emits exhaust gases and therefore is generally not used indoors. Electric forklifts offer benefits for indoor uses.
They are powered by batteries, are less expensive to operate compared to gas-operated lifts and are much quieter.
Manual forklifts are non-motorized units and are not as versatile as the other two kinds. They can only lift goods off of the ground several inches and have a low load capacity.
The use of forklifts allows companies to easily move goods around. It eliminates the need for manpower and reduces the amount of time required to move goods. Forklifts also allow companies to move things up and down to higher locations than what could be reached by hand.
- Q:What is the difference between the series of internal combustion forklifts
- Together there are K, alpha Ⅱ H2000, G series, the K series 2-5 tons, alpha Ⅱ system for alpha upgrade is usually 4 -- 10 tons, the two series car belongs to the common sense of the civilians, high quality and low price. H2000 series for 1-20 tons, G series is 1-3.5 tons, 20-46 tons, belongs to the high-end car, each configuration includes the engine, transmission ratio K, alpha Ⅱ series, especially G system for the latest research and development products, and configuration of imports, the price also very similar to the imported cars, belong to large and medium-sized enterprises and export models.
- Q:The depreciation period and the rate of depreciation of engineering machinery such as forklift truck
- The depreciation of engineering machinery such as forklift truck is five years The new accounting standards are not required for the rate of damage. 5% of the original requirements
- Q:What are the requirements for a forklift
- To apply for a job: Older than 18 years of age; A healthy body Have certain level of culture and work experience; Knowledge and skills in the safety and technology of the special equipment operators with forklift license;
- Q:How do you drive the forklift
- (1) check the vehicle Before (1) forklifts, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. (2) check start-up, operation and braking performance. (3) check the lighting and sound signal to be fully effective. (4) the forklift should check the pressure and the temperature is normal. (5) after the operation of the forklift truck, it should also check the leak and replace the sealing part in time. (6) the electric cylinder forklift should check the contents of the electric car and inspect the circuit of the electric bottle forklift.
- Q:Please have the annual trial of the forklift licence
- Beginning in March 2013, the forklift workers will have a new certificate of 800 yuan (double certificates: primary qualification certificate and registration certificate), and the annual audit will be 250 yuan.
- Q:The component of electric forklift drive system
- Electric forklifts are powered by a battery, an electric controller, a walking motor, and a switch on the direction of the accelerator. The mechanical transmission system has a walking motor, torque converter, differential, axle, wheel. Nothing more. There is a kind of electric forklift truck, there are two motor, a motor driver a front wheel, the car is not half shaft and differential, generally the battery of linde forklift is this kind of design
- Q:Diesel forklifts generally take a long time to replace the oil
- For the first time in the period suggested 50 hours to do the first oil change And with better oil level is above the CD, if you use the bad environment, see the purity of the oil, without a viscous dark or replaced. After the mill period, change every 200 hours. Basically 200 hours, the best method is to look at oil
- Q:Notice those items before the forklift
- Check the vehicle Before (1) forklifts, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. (2) check start-up, operation and braking performance. (3) check the lighting and sound signal to be fully effective.
- Q:People leave the forklift and do what and what to pay attention to when parking
- To leave the forklift when the goods are not on the shelf, and to leave the forklift truck before leaving the forklift truck, and have to remove the goods or take down the cargo fork; 2, stop the brake handle to kill or press the brake switch; The engine is out of fire and the power goes out. Remove the key.
- Q:What the forklift needs to be aware of...
- Apprentice can need not when, formal and normal circumstances must show certificates, attention should be paid to in addition to the daily maintenance of actually running a forklift is nothing particularly noteworthy everything according to the articles of association to can the specific is to pay attention to safety, and regularly check a forklift parts, including brake, pipelines, whether the brake fluid, hydraulic transmission, etc.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Balance forklift with 4 supporting points
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches