Concrete Mixer Truck 14m3
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 500 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Product Feature of Concrete Mixer Truck 14m3
1). Double Logarithmic Variable Pitch Helical Mixer Blade enables higher charging and discharging speed and equal mixing, eliminates segregation phenomenon, and is suitable for the transportation of both dry and wet materials;
2). New technology T-shape Blade. It is made of hard-wearing alloy steel, and thus protects the mixer blades from abrasion, extends the service life of the agitator drum, and enhances mixing performance;
3). The geometric capacity of the agitator drum is very large and the filling rate is low, thus guaranteeing more mixing space. The small inclined angle and low center of gravity help reduce the possibility of turning over;
4). Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: Hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor, and planetary reducer are all made by internationally known brands and offer stable and reliable performances;
5). Pneumatic Water Supply System. The pressure is provided by the air tank on the chassis with pressure protection devices. The water inlet connector fits for both normal water pipe and fire fitting;
6). Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum, charging hopper and discharging hopper respectively, and another flexible water outlet;
Note: Truck Chassis Options: SINOTRUK, SHACMAN, DONGFENG, FOTON, HINO, NISSAN etc.
2. Specification of Concrete Mixer Truck 14m3
Overall Dimensions(L*W*H) | 9230*2496*3850mm |
Kerb Mass(Kg) | 13345 |
Chassis Model | SINOTRUCK HOWO ZZ1257N3848W |
Engine | WD615.95E,336 HP,EGR engine |
Axle Base(mm) | 3825+1350 |
Transmission | HW15710 |
Axle | HC16 Axle,The main speed ratio 5.73 |
Braking System | Service brake: dual circuit air pressure brake
Parking brake: energy storage spring air-cut brake
Auxiliary brake:
Engine exhaust brake |
Tyre | 12.00R20,10 pieces |
A/C | Yes |
Cab | HW76 Flat roof , single sleeper, be overturned |
Mixing Tank Capacity (m3) | 14 |
Hydraulic System(Imported) | ZF P-4300 Reducer; SAUER T90PV075 High-pressure oil pump; SAUER T90MF075 Hydraulic Motor |
Radiator | KAITONG Brand, Capacity: 26L |
Water Supply System | Water tank capacity: 600L Air pressure water supply; Homemade sprinklers |
3. Delivery of Concrete Mixer Truck 14m3
This model could be shipped by Bulk Vessel or Roll-on roll-off vessel.
4. Primary Competitive Advantages
1) Brand-name Parts
2) Country of Origin
3) Competitive Price
4) Good Product Performance
5) Prompt Delivery
6) Quality Approvals
7) Good Reputation
8) Expedite Communication
9) Good Packaging
10) Distributorships Offered
11) One Step Service
12) Good Quality Service
13) Small Orders Accepted
14) Overseas Service Branches
- Q: What are the pros and cons of a concrete mixer?
- Are you talking about the production line at the blender station or is it the usual blender or that? These I understand
- Q: How many tiles are in the concrete mixer on the site
- The type of concrete mixer on the site is different, the power is different. The type of concrete mixer is normally divided by the amount of material, such as the JS500, which indicates the amount of material 500L. A concrete mixer usually has three electric motors: stirring motor, winding motor, pump motor. The following is the power of the blender: The amount of material is 350L, general power of 19.55 KW. The output is 500L, the mixer power is 18.5 KW, the hoist power 5.5 KW, the power of the pump is 750W, the total power is 24.75 KW. Output of 750L, mixer power 30KW, hoist power 7.5 KW, pump power 1.1 KW, total power 38.6 KW; Output 1000L, mixer power 37KW, hoist power 11KW, pump power 3KW, total power 51KW; Output of 1500L, mixer power 45KW, hoist power 18.5 KW, water pump power 3KW, total power 66.5 KW. The output is 2000L, the machine power is 75KW, the power of the hoist is 22KW, the power of the pump is 4KW, the total power is 101KW.
- Q: Concrete mixers need to be aware of which things
- Prior to the use of the new machine, the requirements of the manual of the concrete mixer shall be conducted according to the instructions of the concrete mixer, and the test and the necessary trial operation shall be conducted for each system and the parts. Running in the empty car, checking the rotation direction of the mixer or stirring leaves, the operation of each work unit, the brake, the confirmation of normal, the operation. Fixed concrete mixer should be installed on a strong pedestal. When used in the long term, the ground bolts shall be buried; If used in the short term, you can lay the sleeper and stabilize the sleeper. For mobile concrete mixer, it should be installed on flat and hard floor with square or supporting frame, and hold water flat tire. If more than three months should be used, the tire should be removed properly and the shaft end should be cleaned and rusted. For some mixers that need to be excavated, the ground of the pit should be strengthened to prevent the surface water from entering the pit. The bottom end of the material rail frame should be rammed or laid, and the back of the frame shall be supported by wood to prevent the deformation of the track during work. After the concrete mixer has been started, the mixing drum should be made up after normal speed and after loading, it should be added to the water in time. The new material must be removed before it can be removed. Do not start the blender when the load is stopped or full load, except for the reverser.
- Q: Is the concrete mixer and mortar mixer a machine
- Principle, working condition and so on but the mortar mixer design than concrete mixer So you can use concrete mixer mixing mortar, but unfavorable use mortar mixer mixing concrete
- Q: Common type of concrete mixer
- Self-falling concrete mixer The mixer is placed in a vertical mixing principle. As the mixing cylinder turns, the concrete mixer is used to make the free drop in the barrel and stir. Self-falling concrete mixer is used for mixing plastic concrete and low liquid concrete. The body and blade wear less and are easy to clean, but the power consumption is large and the efficiency is low. It is usually 90-120s. This kind of mixer has a lot of wear and tear on concrete aggregate, which affects the quality of concrete. Strong concrete mixer It contains a number of leaves in the mixing bowl, whisk the blade around the vertical axis or the horizontal axis, and force the material to stir until it is well stirred. The concrete mixer mixing effect. Suitable for mixing dry concrete and lightweight aggregate concrete, and also can stir and low liquidity concrete, mixing quality, fast mixing, the advantages of easy operation and safety. But the machine is worn badly. It is necessary to use high strength alloy steel or other wear-resisting material to make lining, which is used to concentrate the mixing station or the prefabrication plant.
- Q: How much is the blender machine stirring
- The JZC350 concrete mixer is a two-cone-shaped machine that inverts the flow mixer, which can be mixed with the plastic and semi-dry concrete of 60 mm. Stirring when the mixer is turning, and automatically when reversing. Each pot can be mixed with concrete 0.35 cubic meters. Native novel structure, advanced performance, high productivity, mixing of good quality, compact structure, low energy consumption, the advantages of convenient operation, applicable to the general construction sites, road, bridge engineering and small concrete precast construction situations such as a file. The output capacity is 350 litres The incoming capacity is 560 liters 4, productivity 10 ~ 14 m 3 / h The work cycle is 30 to 40 times per hour 6, form a complete set of power
- Q: Operation procedure of concrete mixer
- Before stirring, the car should be run in an empty car. Adjust the timing of the relay according to the stirring time. Water moistening the mixing bowl and the blade and the ground. The process, such as electrical or mechanical fault, should be discharged from the part of the mixing material, lighten the load, remove the fault and then drive again. When operating, the operation should be checked regularly to prevent safety accidents such as electrocution and mechanical injury. Finish the experiment, turn off the power supply, clean the mixing drum and the ground and clean up the cleaning.
- Q: For example, what is the more detailed and better td-50 td-80 td-60
- That's right, tipping over, tdcm125-6d Turn out the material JZC350 (rdcm350-6e, rdcm350-8eh, rdcm350-11e), JZC500, JZR750, JZR1000 Forced JS500, JS750
- Q: How does a concrete mixer operate
- Steps and considerations for concrete mixers: Steps: 1, switch the function switch from the column to "automatic" position, press the start switch on the controller, and the whole operation will operate automatically. After the whole process is finished, it will stop automatically, and in the running project, if it is necessary to stop, press the stop button and then restart. After the start button is pressed, the display begins to show time, slow, sand, fast, stop, fast, and run the light on time. When automatic control, all the switches must be allocated to the stop position.
- Q: Can you stir the mortar in a concrete mixer?
- Vertical shaft concrete mixer can be mixed with mortar. Self-falling concrete mixer is not suitable to mix mortar, especially the mortar with large flow.
Send your message to us
Concrete Mixer Truck 14m3
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 500 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords