Concrete Mixer Truck 9m3
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set unit
- Supply Capability:
- 1000 Units Per Month unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: Concrete Mixer Truck 9m3
1. Product Feature of Concrete Mixer Truck 9m3
1). Double Logarithmic Variable Pitch Helical Mixer Blade enables higher charging and discharging speed and equal mixing, eliminates segregation phenomenon, and is suitable for the transportation of both dry and wet materials;
2). New technology T-shape Blade. It is made of hard-wearing alloy steel, and thus protects the mixer blades from abrasion, extends the service life of the agitator drum, and enhances mixing performance;
3). The geometric capacity of the agitator drum is very large and the filling rate is low, thus guaranteeing more mixing space. The small inclined angle and low center of gravity help reduce the possibility of turning over;
4). Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: Hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor, and planetary reducer are all made by internationally known brands and offer stable and reliable performances;
5). Pneumatic Water Supply System. The pressure is provided by the air tank on the chassis with pressure protection devices. The water inlet connector fits for both normal water pipe and fire fitting;
6). Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum, charging hopper and discharging hopper respectively, and another flexible water outlet;
7). Three-Point Operation System. One in the cab to allow control of the agitator drum, to turn forward and reverse, and to perform the "feed", "discharge", "agitate" and "stop" functions. Two at the rear with one operation handle at each side to perform "charge", "accelerate", "discharge", "agitate" and "stop". Three are interlocking;
8). The milky white upper-fixing looks bright and pleasing with blue decorations on the agitator drum. Colors can be customized according to customer's requirements.
Note: Truck Chassis Options: SINOTRUK, SHACMAN, DONGFENG, FOTON, HINO, NISSAN etc.
2. Specification of Concrete Mixer Truck 9m3
Overall Dimensions(L*W*H) | 9230*2496*3850mm |
Kerb Mass(Kg) | 13345 |
Chassis Model | SINOTRUCK HOWO ZZ1257N3848W |
Engine | WD615.95E,336 HP,EGR engine |
Axle Base(mm) | 3825+1350 |
Transmission | HW15710 |
Axle | HC16 Axle,The main speed ratio 5.73 |
Braking System | Service brake: dual circuit air pressure brake
Parking brake: energy storage spring air-cut brake
Auxiliary brake:
Engine exhaust brake |
Tyre | 12.00R20,10 pieces |
A/C | Yes |
Cab | HW76 Flat roof , single sleeper, be overturned |
Mixing Tank Capacity (m3) | 9 |
Hydraulic System(Imported) | ZF P-4300 Reducer; SAUER T90PV075 High-pressure oil pump; SAUER T90MF075 Hydraulic Motor |
Radiator | KAITONG Brand, Capacity: 26L |
Water Supply System | Water tank capacity: 600L Air pressure water supply; Homemade sprinklers |
3. Delivery of Concrete Mixer Truck 9m3
This model could be shipped by Bulk Vessel or Roll-on roll-off vessel.
4. Primary Competitive Advantages
1) Brand-name Parts
2) Country of Origin
3) Competitive Price
4) Good Product Performance
5) Prompt Delivery
6) Quality Approvals
7) Good Reputation
8) Expedite Communication
9) Good Packaging
10) Distributorships Offered
11) One Step Service
12) Good Quality Service
13) Small Orders Accepted
14) Overseas Service Branches
- Q: What are the small concrete mixers
- Now the market is commonly used for small mixers with JZC350, JZC500, JDY350, JDY500, JS500, JS750, JS1000
- Q: Where can a concrete mixer be used?
- Tile is widely used in home outfit sand, sand pavement tiles grey ash stirring, the botanical garden engineering sand ash mixing, floor concrete mixer, small site masonry mortar and plaster mortar mixing sand dust, electricity, communications and other field operations, seedling fertilizer mixing, family wine could stir scenario. Small mixer is widely used in municipal engineering, small water conservancy projects, rural construction, building decoration, electrical, communications engineering, mountains of bad environment, leisure agriculture, scarification, weeding, etc.
- Q: How long will it take for a concrete mixer to beat ten square?
- Hello there is no type 120 concrete mixer According to what you say, may be 120 type concrete mixing plant, is a set of concrete mixing equipment, including concrete mixer, concrete mixer, cement silo, screw conveyor, etc. There is a slight difference in the production of different manufacturers. I only know that the total power of the 120 stations in zhengzhou is 179.5 kw/h.
- Q: A concrete mixer can last for years
- The concrete mixer's life span is different from that of the car, which can be referenced in several ways: One, the manufacturer that produces, the domestic that imports, the life span is different Second, the production of domestic big brand manufacturer and small factory produce, the life span is different The type of mixer is different (simple, small, medium, large) Four, the frequency that USES is different, life is different The period of maintenance is different, different life span Manufacturer general guarantee a year, if maintenance is good, that is spent long, have no specific numerical value can answer
- Q: Concrete mixers need to be aware of which things
- Prior to the use of the new machine, the requirements of the manual of the concrete mixer shall be conducted according to the instructions of the concrete mixer, and the test and the necessary trial operation shall be conducted for each system and the parts. Running in the empty car, checking the rotation direction of the mixer or stirring leaves, the operation of each work unit, the brake, the confirmation of normal, the operation. Fixed concrete mixer should be installed on a strong pedestal. When used in the long term, the ground bolts shall be buried; If used in the short term, you can lay the sleeper and stabilize the sleeper. For mobile concrete mixer, it should be installed on flat and hard floor with square or supporting frame, and hold water flat tire. If more than three months should be used, the tire should be removed properly and the shaft end should be cleaned and rusted. For some mixers that need to be excavated, the ground of the pit should be strengthened to prevent the surface water from entering the pit. The bottom end of the material rail frame should be rammed or laid, and the back of the frame shall be supported by wood to prevent the deformation of the track during work. After the concrete mixer has been started, the mixing drum should be made up after normal speed and after loading, it should be added to the water in time. The new material must be removed before it can be removed. Do not start the blender when the load is stopped or full load, except for the reverser.
- Q: How many square concrete can be produced in an hour of concrete mixer
- You're talking about 50. The theory is 50 square, which is not really.
- Q: Is the concrete mixer and mortar mixer a machine
- The mortar mixer is the machine which mixes the cement, the sand and the aggregate with the water and mixed the mortar. It consists mainly of mixing, loading and unloading mechanism, water supply system, original motive, transmission mechanism, frame and supporting device. Mortar mixer equipment can meet the performance requirements of dry mortar, dry material, adhesive powder production needs, such as: putty powder, powder coating, masonry mortar, plaster mortar, insulation mortar, decorative mortar needed by the system and so on all kinds of dry powder mortar; And it has many advantages such as small area, little investment, quick results and easy operation. Working principle: when mixed machine work, inside the machine material subjected to two opposite direction of the rotor, with complex movement, the blades to drive the material aspect counterclockwise along the machine slot wall, on the one hand, drive material turning around, overlapping the two rotor shape floating zone, within the region, regardless of the shape of the material, size, and density, can make material floating instant weightlessness, which makes the material in the machine groove omni-directional continuous loop turn staggered shear each other, so as to achieve the effect of rapid mixing soft.
- Q: How many cubic meters of concrete is mixed with concrete mixer?
- Js5001/750/1000/1000/1500/2000/3000/3000 concrete mixers and concrete mixers Depending on the model, you can determine a 0.75 square plate of 0.5 square 750 for the 500 The smallest drum mixer is 0.3 square
- Q: Common type of concrete mixer
- Self-falling concrete mixer The mixer is placed in a vertical mixing principle. As the mixing cylinder turns, the concrete mixer is used to make the free drop in the barrel and stir. Self-falling concrete mixer is used for mixing plastic concrete and low liquid concrete. The body and blade wear less and are easy to clean, but the power consumption is large and the efficiency is low. It is usually 90-120s. This kind of mixer has a lot of wear and tear on concrete aggregate, which affects the quality of concrete. Strong concrete mixer It contains a number of leaves in the mixing bowl, whisk the blade around the vertical axis or the horizontal axis, and force the material to stir until it is well stirred. The concrete mixer mixing effect. Suitable for mixing dry concrete and lightweight aggregate concrete, and also can stir and low liquidity concrete, mixing quality, fast mixing, the advantages of easy operation and safety. But the machine is worn badly. It is necessary to use high strength alloy steel or other wear-resisting material to make lining, which is used to concentrate the mixing station or the prefabrication plant.
- Q: For example, what is the more detailed and better td-50 td-80 td-60
- Concrete mixer points generally mixer and forced mixer, currently used in engineering is forced, the difference is that the former is the shell in turn, the latter is in inside agitation. The most commonly used parts of a strong mixer are: hoisting bucket wheel, mixing arm, blade, hopper limiter, liner. Normally the mixing arm, blade, and lining plate for the vulnerable parts, should be replaced in time during construction.
Send your message to us
Concrete Mixer Truck 9m3
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set unit
- Supply Capability:
- 1000 Units Per Month unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords