CDMA-AWS 850-1700MHz Dual Band Mobile Signal Booster Amplifier Repeater
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Application:To expand signal coverage of GSM900&1800MHz which signal blind areas where signal is weak or unavailable.
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
Now you can reach everywhere with signal boosters!
Features:
1. 300~1500 square meters indoor coverage.
2. Frequency bandwidth of 900MHZ&1800MHZ
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
2. Frequency bandwidth of 900MHZ&1800MHZ
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
8. Supports up to (30) users / calls simultaneously.
Specification:
Indoor coverage : 300-1500 m2
Frequency Range :uplink:824-849MHz 1710-1755MHz,downlink:869-894MHz,2110-2155MHz
Up-link Gain: 60dB
Down-link Gain: 65dB
Output Power UL: 20dBm, DL: 20dBm
Band Flatness: ≤±6
ALC: 31dB @ 0.1dB step
Time Delay: 1 us
Spurious Emission: Out-Band ≤-36dBm
Power Supply: AC110V～220V to DC+5V/2A
Working Temperature: -25 to+55 C
Humidity: 5-95%
Packing:
1. Repeater unit with power supply.
2. Fiberglass outdoor antenna.( Optional)
3. Panel indoor antenna.(Optional)
4. 5m and 15m RF cables.(Optional)
5. A manual.
Warranty & Return Policy:
1. Warranty covers replacement within 12 months.
1. Warranty covers replacement within 12 months.
2. All returns must have an RMA number before they are returned to us. If product is received without an RMA number
it will not be processed.
3. You must place the item(s) including all accessories to be returned in protective packaging (shipping box) with bubble
wrap and make sure that the item(s) do not shake or rattle. Items that are sent in envelopes and incorrect shipping
containers will be refused and returned at your expense.
4. All unauthorized, no reason, etc. returns are subject to 10% restocking fee.
- Q: What is the difference between repeaters and hubs?
- The purpose of a hub is to regenerate and reset network signals. Its characteristics are similar to repeaters (referred to as multiport repeaters, multiport, repeater). HUB is a common connection point for each device in a network, which is usually used to connect segments of the LAN. HUB contains multiple ports. When each packet arrives at a port, it is copied to all other ports so that all LAN segments can see all packets. Hubs do not recognize any information patterns in signals, addresses, or data.
- Q: The role of repeaters?
- AP mode (it can be wired to wireless signal conversion signal, for example you directly to the cable broadband network repeater inserted in the mouth, and then plug in relay power socket, this repeater can "release WiFi", you can use the wireless devices, such as mobile phone, flat computer connected WiFi wireless repeater through the Internet WiFi)
- Q: What are the functions and principles of repeaters?
- Repeater (RP) is a device that connects network lines and is often used for two-way forwarding of physical signals between two network nodes. The repeater mainly completes the physical layer function, is responsible for transmitting the information by the bit in the physical layer of the two nodes, completes the signal duplication, the adjustment and the enlargement function, thus lengthens the network length. As a result of loss, the signal power transmitted on the line will be gradually attenuated, attenuation to a certain extent will cause signal distortion, and this will lead to a reception error. Repeaters are designed to solve this problem. It completes the connection of the physical circuit, amplifies the attenuated signal and remains the same as the original data. In general, both ends of the repeater are connected to the same media, but some repeaters can also do the switching of different media. In theory, the use of repeaters is unlimited, and the network can therefore be indefinitely extended. In fact, this is impossible, because the network standards are specific to the delay range of the signal, the repeater can only work effectively within this set of regulations, otherwise it will cause network failure.
- Q: What is the function of the network relay device?
- (1) the filter traffic repeater receives packets from a subnet which is forwarded only if the message is sent to another subnet attached to the repeater, otherwise it is not forwarded.(2) to enlarge the communication distance, but the cost is to increase some storage and forwarding delay.(3) the maximum number of nodes is increased.
- Q: The relay mode of the WiFi router is to send on the side of the receiver
- The router antenna is not the more the better, not greedy big power, signal router in 2-3GHZ, which belongs to the ultra high frequency electromagnetic radiation source is typical, the signal is too strong to increase the speed of Internet access without any promotion (the Internet depends mainly on broadband lines export bandwidth, rather than the router, but the impact of health bandwidth).
- Q: Repeaters can amplify several WiFi signals, such as three WiFi in my house, and whether the three signals will be very good!
- The principle is that they will relay transmit a signal, when you connect the log switch relay mode (some repeaters used to relay more than) you can find yourself in the emission signal routing in the WiFi list, after the connection (can also name and password) is forwarded to the original signal, so as to realize the signal extended to enhance.
- Q: After setting Repeater mode, the relay effect is not obvious or unsuccessful, what can I do?
- In Repeater mode, the wireless signals, SSID, and encryption modes sent by TL-WR700N are exactly the same as those of the main AP, so after setting the Repeater, the wireless cannot search for the default TL-WR700N of the SSID. In the Bridge mode, the TL-WR700N can set its own SSID and encryption mode for wireless signals, which can be different from the main AP.TL-WR700N sets the Repeater mode as a relay amplification for the front-end wireless device, first establishing a wireless connection with the main AP, and then sending the wireless signals of the main AP,The TL-WR700N setting Bridge mode can also extend wireless coverage by first establishing a wireless connection with the main AP, then TL-WR700N sends its own wireless signals for client connections
- Q: What is the difference between a repeater and an amplifier in a computer network?
- Just put out the network repeater delay, if the line over 200 meters may not have what information (the network connection is not a normal phenomenon)The amplifier can take the cable stretch extension, but also the signal amplification, the network is no longer a thing 200 meters
- Q: Why is the repeater full of signals, but not Internet access?
- Repeaters need to be set up before they can access the internet.In 1, expander factory state after the power is switched on, the plug is not directly amplified Wi-Fi signal, is necessary to set up the expander, in order to enlarge the wireless signal.2, the power socket is inserted in the expander near the main router. The expander can emit radio signals. This signal is used to set up a temporary expander, after setting the signal disappears.
- Q: Why is network repeater so fire?
- Or you can buy a router to do the relay, the cost is high. You can also buy a router to connect the living room and bedroom with the cable, which is more troublesome.
Send your message to us
CDMA-AWS 850-1700MHz Dual Band Mobile Signal Booster Amplifier Repeater
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
