Raw Materials for Refractory:Calcined Bauxite 88% of 3-5mm for CNBM in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 11 m.t
- Supply Capability:
- 11111111 m.t/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Calcined Bauxite Description
Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron. From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle. Very difficult to melt. Insoluble in water, soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material.
2.Main Features of the Calcined Bauxite
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum
hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there.By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
3.Main usage of the Calcined Bauxite
(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc.
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department.
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties.
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries.
(5) in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects.
(6) manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.
4. Calcined Bauxite Images
5. Calcined Bauxite Specification
Produce name, Calcined bauxite,bauxite,sintered bauxite,Round kiln calcined bauxite
Sepcification ,
AL2O3 88%min
Fe2O3 2.5%max
SiO2 6%max
TiO2 4%max
CaO+MgO 0.5%max
R2O 0.5%max
Moisture Absorption 3% max
Bulk Density 3.20g/cm3 min
Size,200mesh,325mesh,100mesh,0-1mm,1-3mm,3-5mm and 5-8mm
6.FAQ of Calcined Bauxite
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please connect me for samples
4). Q: Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
- Q: What is the role of adding chromium oxide green in unshaped refractory materials
- Generally, less is added in corundum or corundum spinel refractory material, but it can significantly improve the material performance such as high temperature strength, erosion resistance, thermal and shock stability, etc.
- Q: How to solve the shell, the crack problem of refractory material in the process of forming.
- Pressure mode and number of pressure control "spallation". 2, multiple pressure, pressure degree and discharge way: 1, reduce friction, choose appropriate, than big pressure disposable pressure produced by the plastic deformation, allocate reasonable grading, internal and external friction, reduce billet particles and high die wall bright. 4.--- solve the light one firstly. --moisture content being too high easily cause spallation - the compressibility of water is small and have certain elasticity, appropriately to extend the pressuring time is beneficial. The material can produce large plastic deformation under the effect of continuous load. The right amount of lubricant. - body under the condition of less pressure but long effect time molding. Mould structure is reasonable and improve billet natural stacking density. 5.3, measures to improve the unburned brick molding quality. Many times continuously pressure relief is better than one-off sudden unloading, and controlling the appropriate moisture content;- - is beneficial to air overflow.
- Q: What is the use of refractory?
- It is equivalent to a protective layer. It can be used to protect structural materials from being direcctly attecked by high tempereture or internal gases. General structural materials are steel, so the main function is resistant to fire and high temperature. In literal meaning, refractory is a fireproof material. Steel is easily deformed and wore. Structural materials can not directly touched with solid and liquid. Refractory materials are generally used as a protective lining of structural material, so it is necessary to be protected.
- Q: Which industry does the metallurgy and thermal insulating and refractory material belong to?
- Materials Industry
- Q: What's the definition of fire endurance of the fire-resistant coating for steel structure?
- 1. Fire endurance. Conduct fire resistance test of any building component according to the standard time-temperature curve, and the time when it is subjected to the fire to the time when it loses support capability or fire insulation function or its integrality is destroyed is referred to fire endurance. 2. Steel has relatively low fire endurance which is usually 0.25h only, namely 15 minutes; 3. Of steel structure buildings, steel can be used as beams, pillars, etc. but its fire endurance is not enough (usually these components have higher requirement on fire endurance, and take pillar as an example, it is usually demanded that the fire endurance should be 2-3h), and under this condition, it needs to brush fire retardant coating so as to raise the fire endurance. As to the specific quantity or types of the fire retardant coating, it is decided upon the actual conditions. In short, the building material needs to meet the required fire endurance of the buildings.
- Q: What are the technical requirements for refractories?
- To put it simply, physical indicators are pores, volume density, pressure resistance, slag resistance, thermal shock resistance, foot expansion coefficient, thermal conductivity, oxidation resistance and so on. If it is castable, the indicators are mobility, water rate, setting time, and anti bending strength. If it is coating mix, the bonding strength should be checked. Chemical indicators are loss of ignition and the content of aluminum, magnesium, silicon, calcium, chromium, titanium and carbon.
- Q: What kind of refractories do the anode baking furnace use?
- 5% volume density. 2 , The application results show that it has the energy-saving effect. 4, Withstand voltage strength. The 50MPa prebaked anode baking furnace furnace wall replaces traditional small special-shaped brick with steel fibre reinforced castable precast block: The aluminum content is 45-60%. The iron content is less than 1. I know someone uses andalusite bricks. This method, under the condition of not changing the roasting technique , has excellent resistance to CO. If there are investors, you can complete the overhaul and reconstruction work of anode baking furnace, which is still a precedent in the country. The andalusite bricks are significantly better than clay bricks. The volume density of 5% of it is 2.25. The compressive strength of 40MPa aluminum content is 60%, and the iron content is less than 1. The andalusite is more denser in the structure. Physical and chemical indicators are as following: it has a good anti-corrosive of exhaust gas Na2O. This is because its chemical composition and mineral composition are very suitable for anode baking furnace, which has long life and easy construction and other characteristics.
- Q: What are the specifications of fireclay bricks?
- Hello: I'm glad to answer your questions! Sizes of refractory brick (mm) 230 * 114 * 65 Xiaoshang Refractory Materials Factory in Zibo city has a relatively large market share, and the products are of high quality at a price of 490 yuan per ton. The cost performance is relatively high and the products are popular in the industry. I hope my answer will be helpful to you.
- Q: what textures of furnace refractories are good?
- Common ceramics use ordinary clay and high alumina bricks, as well as thermal insulation bricks, calcium silicate boards and fiber cotton. The vessels fired with potter's earth are called pottery, and the vessels fired with porcelain clay are called porcelain. Ceramic is generic term of pottery, stoneware and porcelain. The objects taking the two different types of clay as the raw materials, like, potter's earth and porcelain clay, and made through the technological process of ingredients, forming, drying and roasting, ect. can be called ceramics.
- Q: Can the teflon material resist fire?
- It is belonged to the fire retardant materials. By UL-V0 grade
Send your message to us
Raw Materials for Refractory:Calcined Bauxite 88% of 3-5mm for CNBM in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 11 m.t
- Supply Capability:
- 11111111 m.t/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
