Bearings single row tapered roller 32028
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
- Single row Tapered roller bearings
Single row roller bearings can only bear the shaft or shell of a direction of the axial
displacement and a direction of the axial load. So we need the two bearing face to face or
back to back to use.
★Product features
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the
raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. The rollers are guided by a
flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum. The larger the half angles of these
cones the larger the axial force that the bearing can sustain.
★Product application
In many applications tapered roller bearings are used in back-to-back pairs so that axial
forces can be supported equally in either direction.
Pairs of tapered roller bearings are used in:
- car and vehicle wheel
- mining equipment
- moderate speed
- engine motors
- axle systems
- construction
- agriculture
- reducers
- gear box
★Horton tapered roller bearings Basic size
- Single row tapered roller bearings:
Inner ring size: 20mm ~ 1270mm Outer ring size: 40mm ~ 1460mm Width size: 15mm ~ 240mm
- Double row tapered roller bearings:
Inner ring size: 38mm ~ 1560mm Outer ring size: 70mm ~ 1800mm Width size: 50mm ~ 460mm
- Four row tapered roller bearings:
Inner ring size: 130mm ~ 1600mm Outer ring size: 200mm ~ 2000mm Width size: 510mm ~ 1150mm
★Tolerance:
Horton tapered roller bearing with common
tolerance, and also provides P6X, P6, P5, P4,
★Radial clearance
Horton single row tapered roller bearings only
in after installation have clearance, and in
★Cage
Tapered roller bearing general ues the steel plate stamping, basket shape cage, but when the size is bigger, we
also adopts entity cage.
1. Outside diameter D ≤ 650mm, use the steel plate stamping cage, cage postposition without code mark.
2. Outside diameter D > 650 mm, use the steel entity prop cage, cage postposition without code mark.
★Dynamic equivalent load
P = Fr [KN], Fa / Fr ≤ e;
P = 0.4Fr + YFa [KN], Fa / Fr > e.
The single row tapered roller bearings used in pairs (basic physical size can be different), when calculation the
equivalent dynamic load of the bearing, must be included in the radial load cause additional axial force. The single
row tapered roller bearing additional axial force S, can approximate formula: S = Fr / 2y
★Static equivalent load
Single row tapered roller bearings
P0 = 0.5Fr + Y0Fa [KN] P0 < Fr, then P0 = Fr
Double row tapered roller bearings
P = 0Fr + Y1Fa [KN],Fa/Fre ≤ｅ P = 0.67Fr + Y2Fa [KN], Fa/Fre > e
- Q: Taper roller bearings are used on my motor. Serious damage occurred during use. Please help me analyze the possible causes of damage! Thank you
- This approach is somewhat similar to a tolerance control method invented by Timken (Timken) in 80s, and is suitable for mass production. But in this way, you have to control all the variables, or you'll probably have a problem with your bearings.
- Q: What is the size of tapered roller bearings 352214?
- Bearing type: tapered roller bearingNew model: 352214Old model: 97514EInternal diameter (mm):70Outside diameter (mm):125Width (mm):75
- Q: Is the tapered roller bearing so correct?
- Tapered roller bearingTapered roller bearings are designed for the inner ring, outer ring raceway and roller cone vertex on the central axis of the bearing, radial load acting on the bearing, axial force is generated. Therefore, it is necessary to use the 2 bearings for use, or as double pairs of bearings, double row bearings. Combination and double row tapered roller bearings, when radial loads act on tapered roller bearings
- Q: What items should be inspected for tapered bearings?
- 1, the tapered roller bearing without cracks, sharp edges, plants and rust; on the road has not agreed to the raceway of machining trace; super fine traces in the outer ring, the steel ball surface should be symmetrical task differences, not to have scratches, bumps;
- Q: Tapered roller bearing: Bearing expert why burned or locked
- 2, the bearing seat hole size deviation is too small or the size of the shaft deviation is too large, extrusion bearing ring deformation, make the clearance smaller. To burn locking phenomenon.3, bearing outer diameter and bearing seat hole, or between the bearing bore and the surface of the shaft between the foreign body, such as iron filings, burr, sand, cotton and so on. Will also squeeze bearing deformation, so that smaller clearance. To burn locking phenomenon.Bearing burnt lock. The cause of the accident can be analyzed according to the burning degree of the inner shell, the outer shell and the roller1. The inner shell burns most severely, the roller slightly lighter, and the outer shell almost does not change. After excluding the reasons for the nonstandard size of the inner bearing housing, the following judgment can be made.
- Q: The installation of tapered roller bearings
- 3, bearing ring roller contact surface is cone surface or cylindrical surface?Cone surface, in order to be able to bear both axial force and radial force
- Q: What is the 30207 judgment coefficient e of tapered roller bearings?
- What do you need to see for yourself?:Tapered roller bearings: 30207Internal diameter d:35mmOutside diameter D:72mmInner ring height B:17mmOuter ring height C:15mmTotal height (assembly height) T: 18.25mm
- Q: that is to say, the taper head is the face and the back is the back
- The bearings do not have to distinguish between the front and back, and there is no positive and negative said, only in accordance with your actual use to identify the installation direction.
- Q: Tapered roller bearings, 70 in diameter, please tell me the model number
- What about outside diameter (D) and width (B)? You didn't say?.Following are all series of codes and sizes for tapered roller bearings (single column and double row). I hope they can help.Single row tapered roller bearings (taken from GB/T 297-1994)Bearing code |30000: 32914 X2Basic size /mm|d: 70Basic dimensions /mm| D: 100Basic size /mm|T: 20Basic size /mm|B: 19Basic size /mm|C: 16Installation size /mm|da (min):-Installation size /mm|db (max):-Installation dimension /mm| Da (min):-Installation size /mm|Da (max):-Installation size /mm|Db (min):-Installation size /mm|a1 (min): 4Installation size /mm|a2 (min): 6Installation size /mm|ra (max): 1Installation size /mm|rb (max): 1The other is /mm|a size: 19Other sizes /mm|r (min): 1Other sizes /mm|r1 (min): 1The calculated coefficient is |e: 0.33The calculated coefficient is |Y: 1.8The calculated coefficient is |Y0: 1Basic rated load /kN|Cr: 53.2Basic rated load /kN|C0r: 85.5The speed limit / (r/min) | fat: 3600The speed limit / (r/min) | oil: 4500The weight is /kg|W:-
- Q: Turbine turbo rod reduction box, tapered roller bearing at both ends of wormGap measuring method, tapered roller bearingsThe gap is +-0.03, so how do I know the gap is in the range?.
- You can measure the oil gap with a drop bar, that is, a soft drop ruler, which can be purchased without measuring the instrument of the bearing
Send your message to us
Bearings single row tapered roller 32028
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
