Bearings single row tapered roller 32028 for sale
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
- Single row Tapered roller bearings
Single row roller bearings can only bear the shaft or shell of a direction of the axial
displacement and a direction of the axial load. So we need the two bearing face to face or
back to back to use.
★Product features
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the
raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. The rollers are guided by a
flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum. The larger the half angles of these
cones the larger the axial force that the bearing can sustain.
★Product application
In many applications tapered roller bearings are used in back-to-back pairs so that axial
forces can be supported equally in either direction.
Pairs of tapered roller bearings are used in:
- car and vehicle wheel
- mining equipment
- moderate speed
- engine motors
- axle systems
- construction
- agriculture
- reducers
- gear box
★Horton tapered roller bearings Basic size
- Single row tapered roller bearings:
Inner ring size: 20mm ~ 1270mm Outer ring size: 40mm ~ 1460mm Width size: 15mm ~ 240mm
- Double row tapered roller bearings:
Inner ring size: 38mm ~ 1560mm Outer ring size: 70mm ~ 1800mm Width size: 50mm ~ 460mm
- Four row tapered roller bearings:
Inner ring size: 130mm ~ 1600mm Outer ring size: 200mm ~ 2000mm Width size: 510mm ~ 1150mm
★Tolerance:
Horton tapered roller bearing with common
tolerance, and also provides P6X, P6, P5, P4,
★Radial clearance
Horton single row tapered roller bearings only
in after installation have clearance, and in
★Cage
Tapered roller bearing general ues the steel plate stamping, basket shape cage, but when the size is bigger, we
also adopts entity cage.
1. Outside diameter D ≤ 650mm, use the steel plate stamping cage, cage postposition without code mark.
2. Outside diameter D > 650 mm, use the steel entity prop cage, cage postposition without code mark.
★Dynamic equivalent load
P = Fr [KN], Fa / Fr ≤ e;
P = 0.4Fr + YFa [KN], Fa / Fr > e.
The single row tapered roller bearings used in pairs (basic physical size can be different), when calculation the
equivalent dynamic load of the bearing, must be included in the radial load cause additional axial force. The single
row tapered roller bearing additional axial force S, can approximate formula: S = Fr / 2y
★Static equivalent load
Single row tapered roller bearings
P0 = 0.5Fr + Y0Fa [KN] P0 < Fr, then P0 = Fr
Double row tapered roller bearings
P = 0Fr + Y1Fa [KN],Fa/Fre ≤ｅ P = 0.67Fr + Y2Fa [KN], Fa/Fre > e
- Q:Taper roller bearings are used on my motor. Serious damage occurred during use. Please help me analyze the possible causes of damage! Thank you
- This approach is somewhat similar to a tolerance control method invented by Timken (Timken) in 80s, and is suitable for mass production. But in this way, you have to control all the variables, or you'll probably have a problem with your bearings.
- Q:There are many kinds of tapered roller bearings, because of work requirements, test the external size is qualified, I want to make a test, to test the bearing is qualified, mainly inside and outside diameter and inside and outside the ring height tolerances, diameter ranging from 50mm--80mm, score less, look forward to your help, I thank you there are 322163311532215 main bearings, 313113002
- There is one thing that measures the inner diameterPlug coneThe outside diameter of the tool has not been seenThe tool set up is the watch standYou check it outIs it too troublesome to check each one?
- Q:The roller of tapered roller bearings is cylindrical or cylindrical body? Why roller drawing method of drawing section for the rectangular (here I want to add: I have seen the N version, some of the paintings is rectangular, trapezoidal and some paintings, 2 versions, a few of my book is that the proportion is A/2 the roller projection) it indicates that the real roller should be a cylinder or a cylindrical body roller is... What master?
- Cylindrical rollers are used only when the raceway is a cylinder.Mechanical drawing clearly stipulates the simplified drawing method of tapered roller bearings. Rollers are drawn into cylinders.
- Q:Is the tapered roller bearing so correct?
- For example, the middle roller you draw is cylindrical, and the roller of the tapered roller bearing is a frustum of a cone
- Q:Tapered roller bearings, 70 in diameter, please tell me the model number
- What about outside diameter (D) and width (B)? You didn't say?.Following are all series of codes and sizes for tapered roller bearings (single column and double row). I hope they can help.Single row tapered roller bearings (taken from GB/T 297-1994)Bearing code |30000: 32914 X2Basic size /mm|d: 70Basic dimensions /mm| D: 100Basic size /mm|T: 20Basic size /mm|B: 19Basic size /mm|C: 16Installation size /mm|da (min):-Installation size /mm|db (max):-Installation dimension /mm| Da (min):-Installation size /mm|Da (max):-Installation size /mm|Db (min):-Installation size /mm|a1 (min): 4Installation size /mm|a2 (min): 6Installation size /mm|ra (max): 1Installation size /mm|rb (max): 1The other is /mm|a size: 19Other sizes /mm|r (min): 1Other sizes /mm|r1 (min): 1The calculated coefficient is |e: 0.33The calculated coefficient is |Y: 1.8The calculated coefficient is |Y0: 1Basic rated load /kN|Cr: 53.2Basic rated load /kN|C0r: 85.5The speed limit / (r/min) | fat: 3600The speed limit / (r/min) | oil: 4500The weight is /kg|W:-
- Q:Online cylinder cones are GB/T4663, what do you mean?
- Which size do you want, eldest brother? How do I make so much?GB/T: recommended national standards; GB: mandatory national standards4663: taper roller national standard codeThere is a missing release year later!It should be: GB/T 4663-1994
- Q:Tapered roller bearings 32010x, two matching, how to install?
- The design of this kind of bearings makes the inner ring raceway, outer raceway and the top of each cone face intersect the point of the central line of the roller. In addition to metric series products, there are a variety of English series products.
- Q:What are the E and Y values of the 30209 bearings of tapered roller bearings?
- According to its role, it can be divided into the locating shaft shoulder and the transition shaft shoulder.
- Q:What are the conditions for the normal and reverse loading of tapered roller bearings?
- Hello, I'm Camry KMR bearingsTapered roller bearings are generally used in pairs, according to the adjustment, installation and use of different occasions, there are two following arrangement. The 1. suits (outer ring relatively narrow end) corner contact ball bearing or tapered roller bearing pressure center distance is less than two bearing mid span, called dress. The shafting of this method is simple in structure, easy to assemble, disassemble and adjust, but the heating elongation of the shaft will reduce the axial clearance of the bearing and even die.
- Q:What items should be inspected for tapered bearings?
- 4, tapered roller bearing ring after the whole machine after pickling, there should be no scald, the name of cooperation should not be a pickling visible traces of burns, and no response angle detection.Tapered roller bearing appearance should be smooth, lubrication, no plants, no scratches, no rust and no obviously difference, promised to pressure injury, damage, deformation and defects such as trachoma vipassana.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Bearings single row tapered roller 32028 for sale
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
