Auto-Climbing Bracket ACB50
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Auto-climbing Bracket ACB100 & ACB50
The power of the auto-climbing formwork is the hydraulic system, which includes the oil cylinder
and two commutators. The commutators can control the climbing of climbing rail and the bracket.
The steel rail and the bracket can inter-climbing, so the whole system will climb up steadily.
Cranes are not needed during the construction. It’s easy to operate, highly efficient and safe. It’s
the best choice for the construction of high buildings and bridges.
There are mainly two types of standard auto-climbing brackets, ACB-50 and ACB-100, the figure
means the push power of cylinder with unit of KN.
Characteristics:
◆ Perfect load bearing anchor system
Anchor system is the most important supporting part. The system is made of five parts shown
below. Thereinto, tensile bolt, V-climbing cone and washer can be taken out for reusing after the
concrete pouring finished.There are two kinds of anchor systems,A & B. A is matched with single
anchor shoe and B is matched with double anchor shoe.
◆ Crane-independent
Crane-independent forming, striking and climbing speeds up the work procedures on the
construction site and also makes them independent of each other. This means the planned
sequences can be maintained along with guaranteeing high productivity levels. The crane can
therefore be used for other tasks.
Hydraulic system is mainly made of two commutators,
oil cylinder and power distribution system.The
commutators can control the climbing of climbing rail
and bracket.
◆ High bearing capacity and safe
The stable working platforms are able to carry large loads, e.g. the storage of reinforcing steel
for the next climbing section. Generously-sized working platforms, the well thought-out design for
handling very high wind loads and the patented control function of the climbing mechanism are
some of the special details contained within the comprehensive safety concept.
◆ Platforms adjusted to suit the angle of inclination
The horizontal working areas thus created provide safe and comfortable conditions for
reinforcement work, shuttering and striking, concreting and finishing.
◆ The ACB formwork system can climb not only vertically but also slantways, the largest angle is
18 degrees.
◆ The system can climb up wholly or separately. The climbing process is steady, synchronous
and safe.
◆ The bracket will not fall to the ground until the construction is finished, the field will be saved
and the impacting breakage will be reduced (especially the panel).
◆ The system will furnish omnidirectional platform, the construction organizations don’t need to
set up additional operation platform.
◆ The error of structure construction is small and easy to correct.
◆ The climbing speed is fast, the construction course will be quickened.
◆ The formwork can climb itself and cleaning work can be done in the same situs , the used times
of tower crane will be greatly reduced.
- Q:Is the car seat with lumbar support adjustable?
- To overcome the long-term driving of the waist fatigue because the sitting posture slightly back, and the waist should have been convex lumbar, behind the support has become a little Luo pot look like a long time will be uncomfortable especially the waist of the poor people.
- Q:JGJ128-2000 door type steel scaffolding specifications only adjustable adjustable screw extension of the base of the relevant provisions of the top of the screw extension of the length of no provisions, but in the specification check the inspection items to check the extension of the screw extension length. What is the standard?
- According to the information provided by the door steel pipe scaffolding manufacturers, usually a mast to allow the load of 49KN, that is, adjustable base adjustment screw extension length of not more than 200mm, each pole is 24.5KN, out of the length of 300mm, each root Rod is 24.5 × 0.90 = 22.05KN, extension length of more than 300mm, each pole is 24.5 × 0.80 = 19.6KN. Adjustable base, the maximum adjustable height of the top care: 400 when the high 250mm, 780 high when the 520mm. (The most critical is to see the manufacturers to provide the data)
- Q:Scaffolding brace has several models, respectively, can bear the load?
- Common scaffolding brackets are U-type care, "construction of fasteners steel scaffold safety technical regulations" (JGJ130-2011) provides "adjustable support bearing capacity design value should not be less than 40kN, the support plate thickness should not be less than 5mm ", the general calculation using 30kN.
- Q:Why 2013 BMW 320LI no waist support regulation, and now 2014 models are still not, as a luxury brand is difficult to understand
- Because it is low-end BMW models, like the 7 series of these have
- Q:The permissible range of the top support of the template
- As the current building materials on the market, adjustable top care, adjustable base product specifications vary greatly. Help you brothers, whether there are relevant norms, adjustable top care, adjustable base of the various components from the clear requirements, such as the length of the bolt diameter, steel plate thickness, size and so on. As well as adjustable top care, adjustable use of the base length range.
- Q:What is the range of adjustment for the full range of scaffolding?
- Bracket vertical control vertical pole vertical and horizontal bar level, the vertical deviation of the whole frame shall not be greater than h / 500 (h for the pole height), but the maximum does not exceed 20mm;
- Q:Car plus a tire pressure detection and waist support adjustment about how much money
- Hello, tire pressure detection is generally about 200 yuan, waist support you need to estimate about 800 or so, depending on the specific market conditions, and hope to help you
- Q:Support on why there is adjustable support and support the set position, that is, where to put any place can not put?
- Why use adjustable: because each location of the template height is not the same, adjustable support can be more practical need to control
- Q:Yee Jun Edition Octavia with waist support adjustment?
- Waist support and only the power seat of the tube thing, manual useless.
- Q:As the gym did not squat rack, with Smith machine waist twist discomfort, so use the reclining push the practice of squatting, from 40 kg to the current 85 kg. Can this continue to practice it?
- The barbell on the parallel bars on the squat, to prevent the barbell roll down, can be wrapped in coarse bars on the coarse rope. As the support point near the middle of the barbell bar, plus or minus the barbell when the two sides on both sides at the same time, so as not to lose balance. Taking into account the design of the parallel bars to bear the weight of the person, while the main squat only 85 kg, so little problem.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Auto-Climbing Bracket ACB50
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
