Aluminum Foil With Paperboard Backing In Rolls Type
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction
Aluminum foil is aluminum prepared in thin metal leaves with a thickness less than 0.2 millimetres (8 mils); thinner gauges down to 6 micrometres (0.24 mil) are also commonly used. In the United States, foils are commonly gauged in thousandths of an inch or mils. Standard household foil is typically 0.016 mm (0.63 mil) thick, and heavy duty household foil is typically 0.024 mm (0.94 mil). The foil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes lamilated to other materials such as plastics or paper to make them more useful. Aluminum foil supplanted tin foil in the mid 20th century.
Annual production of aluminum foil was approximately 216,000 tonnes (216,000 tons) in LingFeng (our company) one year..Approximately 75% of aluminium foil is used for packaging of foods. household foil,container foil, cosmetics and pharmaceutcal foil etc, and 25% used for industrial applications (e.g. thermal insulation, cables and electronics).
Application of Aluminum Foil:Mainly used in package for food, drinking, cigarette, Pharmaceutical, photograph, daily necessities, power capacitor, construction, auto,boat, celling, lable, etc .
Quality of Aluminum Foil: Totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set.
Chinese Standard of Aluminum Foil: ASTM-B209. EN573-1, GB/T3880.1-2006
Packing for Aluminum Foil: Seaworthy wooden case/box, or as your requirement. ID of aluminum foil roll: 76mm,152mm,200mm,300mm
Kind attention: Specifications can be customized as the customer’s requirements.
Specification of Aluminum Foil
| Alloy No. | Thickness (mm) | Width (mm) | Temper | |
| A1145,A1235,A8011 Household Foil | 0.005-0.2 | 20-1700 | O,H14,H18,H19,H24 | |
| A3003,A8011 Semi Rigid Container Foil | 0.005-0.2 | 20-1700 | O,H14,H18,H19,H24 | |
| A8011,A8021 Pharmaceutical Foil | 0.005-0.2 | 20-1700 | O,H14,H18,H19,H24 | |
| A8011 Foil Label | 0.005-0.2 | 20-1700 | O,H14,H18,H19,H24 | |
| A1145,A1100,A1235,A8001 Fexible Packing Foil | 0.005-0.2 | 20-1700 | O,H14,H18,H19,H24 | |
Our services
1. Reasonable production arrangement to make delivery very fast;
2. We are able to provide leading tolerances, metallurgical assistance, quick and reliable delivery, samples for new products, etc.
3. We have the strong capability to meet your particular requirement for the products.
4.To guarantee the quality of the products we can meet most of the standards all over the world.
Photos of products
- Q:I have never done a large pork shoulder before, this is about 7 poundsI have had a Puerto Rican friend make an AWESOME pork once, I think they used moho or something on it? I can cook it on a chargriller charcoal grill.I dont have a smoker box but I can make a smoke pack with foil or something if that would be part of the recipeI can't wait to eat this thing! Thanks for all the help, you guys rock!
- This is the authentic Puerto Rican RecipePernil (Roast Pork Shoulder) Pernil (Roast Pork) Ingredients 1 8-10 lbsPERNIL (Pork Shoulder) 1 Big head of garlic Adobo to your taste (This ia a Goya all purpose seasoning) 2 Teaspoons of ground black pepper 1 Tablespoon of olive oil 1 Teaspoon of crushed oregano Directions Start by pre-heating your oven to 350?Sit down and peel all the garlic Wash the pernil with cold water and sprinkle some adobo to your tasteFor a better flavor, season the night beforeMake stabs (about 1 inch wide) so you can put the paste like mixture in them(Ladies be nice and don't think about that new dress that he won't let you buy when you are stabbing the pernil)Take out your pilón and dust it off (ha ha)Mash the garlic to a paste and add the oregano and pepper(Achoo!! Salud-Bless You) After the garlic and pepper are well mixed, add the olive oil and stir with a spoon to make a paste like mixtureit is ready.! Place about 1 teaspoon of the paste into each hole of the pernilCover the bottom of your baking pan with aluminum foil and place the pernil on top(TIP) Cover the pernil well with aluminum foil so it will come out juicy, not dryUncover it for the last 15 - 20 minutes on a high setting for some crunchy chicharrón skinBake for 4 to 5 hours at 350?(The time depends on your ovenCheck it in 3? hours)(TIP) Sit down and relax.
- Q:aluminum, Z 13phosphorus, Z 15
- put the ceiling higher.?
- Q:why can beta, gamma, alpha penetrate paper, aluminum and lead?
- It would for a short while until your body heat warmed the material, however the camera operator would notice the unusual shape of the blanket, which would be abnormal to the surrounding ground temperatureIf its cooler, it would also stand out
- Q:Should adding citric acid powder to 3% hydrogen peroxide solution produce any new chemicals?
- I don't like the new black on silver macbooks :( But anyway I say keep the old onePCs can do media stuff too.
- Q:What is best way to fry Bacon ? I like it crisp?
- Because only vehicles were affected.
- Q:Oxford cloth moistureproof aluminum foil moistureproof which good?
- Oxford cloth moisture-proof effect, no foil, moisture-proof effect, but Oxford cloth anti tearingThe foil doesn't tear, but the foil reflects heat, which you have to choose
- Q:alphabetadeltagamma
- None of your options are cheapIf you live in a humid area drying the air inside with a dehumidifier can improve the 'feeling' of warmth even if it's not warmerWindows are a BIG heat loss, especially single-pane, might be my first stepWalls loss a substantial amount of heat but the floor radiates cold into the house and when the floor is cold so are your feet (icicle-toes ring any bells?).
- Q:Hi- I've been learning a little bit about casting aluminum objects from a home foundry- I've come across the topic of shrinkage and this raises concerns:Suppose I want an aluminum copy of an object that is an exact match in size and shape.Say, the your intake manifold in your carWhat method of casting do I use? Close to the same size is nice but a 2% size difference would likely cause functional problemsLost foam? Pressing one half of the object into one half of a flask, then the other half of the object into the other?
- Well, in the strictest terms the bonding between carbon fiber (CF) and aluminum (AL) had better be at least a bit reactive or else you won't get a good bondThere are many AL parts that have a CF overlay but there are some things that you'll need to do for good success: 1) The AL must be phosphatized to exacuate the oxygen from the metalIt should be laminated immediately afterwards without touching the metal with your bare hands to avoid contamination; 2) The CF must be cured onto the AL using some kind of vacuum system, perhaps a strong plastic sealable bag into which the AL/CF item is placed, then the air pumped out using a vacuum pump; 3) You'll need to use thermoset epoxy that activates with peroxide to bond the CF to itself and the two objects togetherIt will be a rather high ratio, perhaps 20% to 25% epoxy to CF- makes for a messy day I know the answer because I design bike frames and parts utilizing this method.
- Q:I have a aluminum bass tracker and I want to paint it one solid color and.put a decal on it, whats the easiest way? I dont have no big sanders or nothing like thatI dont know if they make some spray paint for stuff like that
- Yes, that will workBut, getting paint drop plastic sheets and cutting them to length would be cheaper and work betterBlankets has holes in them and plastic is air tight.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Aluminum Foil With Paperboard Backing In Rolls Type
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
