AAC Plant for Indian Customers
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 100 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aac plant best choice for Indian customers
1.fully automated operating
2.light weight,lowcost,high profit
3.best manufacturer
There are more and more Indian customers tend to build the aac plant, which will be a potential industry in Indian in the near future, and it will also be the emerging industry in the whole world. More earlier you start, more profit you will get and more market you will get. Our company can make the equipment configuration and provide the free technical support according to customers' different requirements.
1.AAC Production Line Introduction
AAC block (light brick ) is the light and porous buidling material. It has light keeping temperature cant burn and other advantages.it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.
2.AAC Production Line common conception
Common concrete density is usually 1600-2400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:coal ash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example coal ash.Mixing calcium material lime cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.
3.AAC block Advantages
* light weight
* Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
* keeping temperature
* It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as 1/4 or 1/5 of clay brick,so it is best materials now in the world.
* have many kinds material,have lowest waste
Main Material:coal ash sand waste mine material coal stonestone dust and other silicon materials.
We can supply our customer for designning, production, installation, commissioning, training and good after-sale service.
Capacity: from 20000 cubic meter to 300,000 cubic meters per year.
Equipments: stocking raw materials, mixing, molding, forming, cutting, evaporating and curing, crane cramp, transporting etc.,
1 Product weight is according to 600kg/m3 to control.
2 annual capacity 200,000M3.
3 set raw material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3.
4 water and material rate 0.631
5 one mould product 2.88M3
6 Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
name | unit | Cement lime fly ash |
flash | % | 65-70 |
cement | % | 6-15 |
lime | % | 18-25 |
gypsum | % | 3-5 |
Aluminum powder paste(600kg/m3) | 1/10000 | 8 |
Water & material rate |
| 0.60-0.65 |
Casting system | OC | 36-40 |
Aluminum mixing time | S | 30-40 |
Name | Unit | Cement Lime Sand |
Sand | % | 55-65 |
Cement | % | 10-20 |
Lime | % | 20-30 |
Gypsum | % | 2-3 |
Aluminum powder paste(600kg/m3) | 1/10000 | 8 |
Water & material rate |
| 0.65-0.75 |
Casting system | OC | 35-38 |
Aluminum mixing time | S | 30-40 |
Reference: cement is 42.5 Portland or 42.5 common cement
Aluminum power paste calculate to use according to 600kg/m3
Remark: the accurate batching rate is adjustable according to the raw material locally
- Q: How much is the size of the sintered brick? Sintered brick specification
- Ordinary sintered bricks can be used to make chimneys, masonry walls, building enclosures and cell floors
- Q: 800 * 800 size is best to have models Thank you ha more
- The price or buy a gobling to the high home than the high
- Q: Hand-held tiles to seal the floor after the floor tile covered with cracks in the solidified cement there is no one equipment to clean up
- Second, to see its anti-fouling ability, if the family are very busy, two or three days to clean a health, it would choose to better defrost capacity Third, if the home has the elderly and children, then the purchase must be made about non-slip test Specifically, the selection of floor tiles can start from the following aspects: 1 To see whether the color of the tile body is pure Mainly observe the back of the tile color is uniform, consistent 2 To observe the tile cross section of the particles are delicate Here the cross section does not refer to the tile around the cutting surface, but refers to the broken tile tile In general, the fracture at the fine, hard and brittle, consistent color for the top grade Because the fine grain tiles waterproof ability, and the larger particles of the tile, the water is easy to immerse, affecting the quality 3 Pay attention to the thickness of the glaze layer Glaze thickness is the thickness of the glazed cross section Glaze is the most expensive material in the tile cost, the thicker the glaze, the better the quality 4 Listen Tapping the tiles to pay attention to hear the sound is crisp, such as the sound clear, sweet for the top grade, such as the sound boring for the defective 5 Try the water Consumers can pour some water on the back of the tiles, pay attention to observe the speed of water absorption of tiles After a few minutes, look at the positive water left the mark is obvious After the water is spread, the density of the tiles is so long, and the water is not obvious 6 Warping Take two brick back to the back and face to face to see whether it can be in close contact with the phenomenon of excessive gap can determine whether there is warping 7 infiltration Find ink painted on the surface after 1 hour after scrub to see if there are traces, no trace is a good brick, there is a strong choice of infiltration
- Q: What is the meaning of the floor tiles in the decoration, how to construction
- (Usually 5mm-15mm), until the tiles and the ground after a solid bond to start to tackle, groping materials are generally cement, white cement, gluing agent , Cement plus color powder, hook when the material with a certain amount of water mixed into a dry and wet moderate (when mixed with a basic bulk, with a little hand can be grouped into a group, the group lost on the ground broken open), the mix Good material is embedded in the tiles and crushed and crushed, and then with a round bar or tube to the surface of the outer surface to scratch the slit (the length of the bar is the width of the bar Times to 2 times, the seam embedded in the surface of the material scraped into concave round, and squeeze dense and smooth), and then clean the floor tile surface. Above is the real sense of the tiles to tackle the construction, but sometimes there are a lot of people to the following practice is also called the floor tiles (should be called scratches): non-real sense of the tiles hook (scratch): tiles paving When the tiles and tiles do not deliberately leave the gap (but there will be a small slit), until the tiles and the ground after a solid bond to start scratching, the material generally cement, white cement, cement plus color, Material plus a certain amount of water mixed into the dry and wet (slightly higher than the above-used grouting material a little more water), the mixed material on the floor tile patchwork, and then gauze, snakeskin bags and other soft objects into the group to wipe , So that the material through the squeeze and squeeze into the seam, the stitched dense, and then clean the surface of the tiles. Groove and scratches can also be called cracks. Life is happy! Understand please adopt.
- Q: To "goodbye a chome" to ask: clay brick or clay brick
- Now "clay" and "clay" have become synonyms and have been merged
- Q: How to identify the quality of floor tiles and interior walls to buy how to know how to know how the quality of it?
- The first thing to consider is the water absorption
- Q: We have a new site into the tile, whether to manufacturers tiles to prove the information, whether the material inspection? More
- Need your information staff need to approach the tiles to supervise the post-mortem report, the required information: factory qualification, testing reports, and certificates. These three kinds of information must be covered. In triplicate. Materials have to check
- Q: Tang River building materials market Xin Zhongyuan floor tile is good
- View the appearance of the main include the same name to see whether there is no color between the tiles; the same kind of brick between the corresponding length is the same; the same brick on the length of the same; whether the deformation of the tiles, edge is not straight, Whether the surface tile defects, such as uneven, pinhole, lump off, and so on
- Q: Taking into account the use of environmental protection and practical use of red wood
- Imitation wood grain brick why this red: imitation wood grain brick PK wood floor use advantages imitation wood such as wood wins wood low price long imitation wood grain tiles relative to ordinary high tiles, but with hundreds of square meters of solid wood Compared to the floor, the wood grain brick obviously has a great price advantage, and wood grain brick long life, wear, no need to like wood products as a regular waxing maintenance, low cost long use, is indeed more cost-effective s Choice The use of space to expand the style of texture selection of multi-grain brick can be used in the wood flooring inconvenient use of the kitchen, bathroom space, no doubt added to the practicality; in the category, imitation wood grain brick with porcelain glazed, glazed matte, glazed Semi-polished, glazed all polished, flat / convex surface, etc, different processes to create a different texture; with a variety of patterns, shapes and colors, consumers in the style and texture of choice, more wood flooring is also more abundant Wear and waterproof cleaning and maintenance simple and easy to imitate wood surface brick surface by the waterproof treatment, if dust contaminated, can be directly wipe with water, while imitation wood brick also has strong anti-fouling ability, under normal circumstances, water and standard neutral detergent You can complete the cleaning, cleaning and maintenance than wood flooring a lot easier Fire-free formaldehyde environmental safety and safe use of intelligent imitation wood brick itself with fire-retardant fire, corrosion-resistant features, and to avoid the possibility of formaldehyde in the wood floor, green, environmentally friendly building materials, while the ordinary brick tiles Slip performance is good, home children and elderly walking is relatively safe
- Q: County-level cities, to open tiles building materials shop, I would like to ask where to go to purchase channels?
- The most important thing is to pass the GSP certification, if you pass the GSP certification, the pharmacy can basically open
1. Manufacturer Overview
| Location | Henan,China (Mainland) |
| Year Established | 2011 |
| Annual Output Value | US$5 Million - US$10 Million |
| Main Markets | 40.00% Southeast Asia 30.00% Domestic Market 20.00% Eastern Europe 10.00% Africa |
| Company Certifications | NQA Quality certification |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Qingdao,Tianjin,Shanghai |
| Export Percentage | 61% - 70% |
| No.of Employees in Trade Department | 6-10 People |
| Language Spoken: | English, Chinese, Spanish, Japanese, French, Russian, Italian |
| b) Factory Information | |
| Factory Size: | 3,000-5,000 square meters |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
AAC Plant for Indian Customers
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 100 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
