5253GJB Concrete Mixer Truck Comfortable, roomy, and open cab
- Loading Port:
- Qingdao
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 set
- Supply Capability:
- 50 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
The chassis is CNHTC’s Steyr ZZ1252N3246F truck chassis with excellent power, maneuverability, comfort, cost-effectiveness, and reliability.
1、Engine: In-line 6-cylinder, 4-stroke, water cooled, pressurized intercooler, SINOTRUK WD615.68A diesel engine
2、Engine output: Strong power of 247KW (336hp)
3、Engine: Fuel-saving and environmentally friendly, low fuel consumption, cost effective, Euro II
4、Truck frame section dimensions: 320×90× (8+7) (double layer) mm, with 8mm (upper part) and
12mm (lower part) reinforced plates.
5、Comfortable, roomy, and open cab
Primary Competitive Advantages
- Easy and reliable hand-operated cab tilting mechanisms
- Open view with large windscreen and door.
- New instrument panel with alarming lights of each control system
- Crew cab with built-in bed to provide the operator a comfortable rest environment
- Luxury air conditioner and music center inside the cab.
- Adjustable steering wheel and seat design is in accordance with ergonomics. The position and height of the seat and the angle of the backrest can be adjusted completely.
- Comfortable suspension system
- Small turning radius with excellent maneuverability and passing capability
Delivery of Concrete Mixer Truck 9m3
This model could be shipped by Bulk Vessel or Roll-on roll-off vessel.
Feeding & Discharging Speed
Items National Standard
Feeding hopper size >650mm 1000×950mm
Feeding speed ≥2.7m3/min /min >3.0m3
Discharging speed ≥0.65m3/min /min >1.6m3
Primary Competitive Advantages
1) Brand-name Parts
2) Country of Origin
3) Competitive Price
4) Good Product Performance
5) Prompt Delivery
6) Quality Approvals
7) Good Reputation
8) Expedite Communication
9) Good Packaging
10) Distributorships Offered
11) One Step Service
12) Good Quality Service
13) Small Orders Accepted
14) Overseas Service Branches
- Q: What are the small concrete mixers
- Now the market is commonly used for small mixers with JZC350, JZC500, JDY350, JDY500, JS500, JS750, JS1000
- Q: Where can a concrete mixer be used?
- Tile is widely used in home outfit sand, sand pavement tiles grey ash stirring, the botanical garden engineering sand ash mixing, floor concrete mixer, small site masonry mortar and plaster mortar mixing sand dust, electricity, communications and other field operations, seedling fertilizer mixing, family wine could stir scenario. Small mixer is widely used in municipal engineering, small water conservancy projects, rural construction, building decoration, electrical, communications engineering, mountains of bad environment, leisure agriculture, scarification, weeding, etc.
- Q: What are the pros and cons of a concrete mixer?
- The noise is very large when mixing and feed, the installation is more trouble, the use of the dust is very large, the accident, the concrete mixing and the uniform time is not easy to control
- Q: How long will it take for a concrete mixer to beat ten square?
- 1, 2 square, each time you can mix 1 square, top material, stirring, material for about 10 minutes, (depending on the material speed), 10 square about 100 minutes
- Q: How to safely use concrete mixer
- Concrete mixer operation method: 1. The concrete mixer should be placed in a firm place, with the support of the bracket or the support of the foot barrel, and cannot be supported by the tyre. Before the concrete mixer starts, check whether the controller is good. When the concrete mixer is hoisted in the hopper, it is strictly forbidden to pass or stop by the hopper and set up the mixer after the work is completed. When the concrete mixer is running, it is strictly forbidden to put the tools in the roller, and pay more attention to safety. When the concrete mixer is on site, it should be fixed in the mixer, cut off the power supply, and when it enters the mixer cylinder, the outside must be monitored. (the operator of the concrete mixer (driver) must be trained in safety technical training, qualified for examination, and will be held on the certificate and strictly prohibit non-driver operation. The concrete mixer must clean the inside, especially in the winter, which can prolong the service life by using no foreign material in the front roller.
- Q: Concrete mixers need to be aware of which things
- The concrete mixer should be set in a flat position, and the wheel shaft will be placed on the back and back of the square, so that the tyre should be set up so that it will not move during the run. 2, the concrete mixer should be protected by secondary leakage, and after the power connection is put on before work, it must be carefully checked, and it will be used only if it is considered qualified by the empty car test. Commissioning should check when mixing drum speed whether appropriate, under normal circumstances, the proportion of empty car speed car was faster (after loading) 2 ~ 3, such as the difference is more, should adjust pulley and the proportion of the driving wheel. The rotating direction of the mixing cylinder shall be in accordance with the direction of the direction of the arrow, if it is not true, the motor connection shall be corrected. 4, check whether the transmission clutch and brake is flexible and reliable, wire rope is damaged, track pulley are in good condition, surrounded by accessibility and lubrication situation of each part. After turning on the machine, it is often noted that the parts of the concrete mixer are working properly. When stop, check whether the concrete mixer blade is bent and the screw is loose or not. 6, when the completion of concrete mixing or pause is expected to more than 1 h, besides excess stock out of the net, the application of stones and water to pour into shaking inside the cylinder, turn on, put the glue on the cylinder of the mortar all discharged after rinse. No water is allowed in the cylinder in case the cylinder and blade are rusted. It should also clean up the outside of the mixing cylinder to keep the machine clean. 7, after work and stop after work, should pull off power without power, and lock switch box, to assure safety.
- Q: How many square concrete can be produced in an hour of concrete mixer
- You're talking about 50. The theory is 50 square, which is not really.
- Q: How is the concrete mixer cleaned
- When the blender is finished, rinse the water immediately, but you can't wash it if you don't clean it immediately
- Q: How many cubic meters of concrete is mixed with concrete mixer?
- Js5001/750/1000/1000/1500/2000/3000/3000 concrete mixers and concrete mixers Depending on the model, you can determine a 0.75 square plate of 0.5 square 750 for the 500 The smallest drum mixer is 0.3 square
- Q: What is the difference between a concrete mixer, a JL type and a JW type?
- The jw-375 concrete mixer is a turbo-reinforced concrete mixer, which is used for hard and semi-dry concrete. The main body of this mixer consists of the frame, the feeding system, the mixing system, the water supply system, the control device and the transmission mechanism.
Send your message to us
5253GJB Concrete Mixer Truck Comfortable, roomy, and open cab
- Loading Port:
- Qingdao
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 set
- Supply Capability:
- 50 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords