2Ft 4Ft 5Ft 6Ft 8Ft 90-277Vac Ce Rohs Ul Tuv Led Tube T8 With 3 Years Warranty
- Ref Price:
-
$5.00 - 30.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 10 Pieces pc
- Supply Capability:
- 10000 Pieces per Week pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
2ft 4ft 5ft 6ft 8ft 90-277vac CE Rohs UL TUV led tube T8 with 3 years warranty
Specification:
Type No. | Length | Dia. | LED Qty | Watt | LED Type | Voltage | Lumen |
GL-T8GLO-06 | 0.6m | 26mm | 60pcs | 8W | SMD 2833 | 85-265VAC | 800 lm±10% |
GL-T8GLO-12 | 1.2m | 26mm | 120pcs | 18W | SMD 2833 | 85-265VAC | 1800 lm±10% |
GL-T8GLO-15 | 1.5m | 26mm | 144pcs | 24W | SMD 2833 | 85-265VAC | 2400 lm±10% |
GL-T8GLO-18 | 1.8m | 26mm | 192pcs | 28W | SMD 2833 | 85-265VAC | 2800 lm±10% |
GL-T8GLO-24 | 2.4m | 26mm | 240pcs | 40W | SMD 2833 | 85-265VAC | 4000 lm±10% |
Product features:
1. 60,90,120,150,180,240cm, CE ROHS TUV PSE
2. 360 degree Rotating G13 end caps;Bi-pin
3. Aluminum pipe+Clear/ frosted PC cover
4. Input Voltage:85-265VAC
5. PF: > 0.95.
Warranty: 3 years.
a. Within the warranty period,Gielight provides free repairing service. If the certain item can't be repaired, Gielight will offer the new one for replacement at no extra cost.
b. Within the warranty period, Gielight bears the shipping cost back and forth for replacing the defective goods.
Application :
Schools, hotels, garages, offices, factories, warehouses, housing lighting, market, etc.
Welcome to send us an inquiry! Thank you!
- Q: Are led fluorescent tubes not available for lighting?
- It is also possible to use a stent without a stent, usually with a negative level on the positive side of the connection
- Q: The two ballast that originally was electric inductance towed three ordinary fluorescent lamps, now changed to LED fluorescent lamp tube, have influence?
- The impact is certain, and it wastes electricity. It is expected to waste about 12W of power, and if it is powered by a capacitor, it will also greatly affect the brightness.
- Q: The difference between LED and fluorescent lamps
- Leds are composed mainly of PN junction chips, electrodes and optical systems. Its luminosity - the chip's area of 12 * 23mil (1mil = 0.0254mm), currently has a large chip LED in the world, with a total area of 40 * 40mil. The process of luminescence consists of three parts: fluid injection, composite radiation and light transmission of positive bias. Tiny semiconductor chip is encapsulated in the pure epoxy resin content, while the electrons through the crystal, negatively charged electrons move to the positively charged hole area and complex, with disappearance of electrons and holes at the same time produce photons. The larger the energy between the electron and the hole, the higher the energy of the photon. Photon energy, in turn, and the color of the light, the spectrum of visible light range, blue light, purple light carrying the most energy, orange colored light, red light with the least amount of energy. Because different materials have different bands, they can emit different colors of light
- Q: The difference between an LED tube and a daylight lamp
- Traditional fluorescent lamps generally cannot choose color temperature, and color. LED bulbs have a choice.
- Q: The reason for the slow start of an old-fashioned daylight tube
- The regenerator is a light that USES neon to discharge heat and causes the two metal plates to close, and then it takes time for the contact to turn off when it is cooled.
- Q: Are LED lights like regular daylight bulbs
- LED lights, like many ordinary lamp belongs to the point light source, looks very dazzling, direct words must be harmful to the eyes, if from the perspective of protecting our eyes, suggestion choice electrodeless lamp, surface light source, the light is soft, is relatively good
- Q: Ordinary lamp tube is replaced by the led for video
- ?tear down everything on the shelf, (one of them is a spin-off: the regenerator, and the inductor, the other is an open circuit board). 2: take the 220V line of communication. Another: LED tube at both ends of two light feet are interlinked, so on the bracket in the line, as long as the wire and zero line in both ends can be respectively, each side there are two shell inside, which one can be
- Q: What are the advantages and differences of the LED panel lights?
- 11.8 mm, the thinnest can do 8.5 mm, are light will be more than three times thicker than the side light, thin is a kind of fashion, especially for lifting the panel lights, also not the thinner the good, the thickness of the lamp body is designed according to the application environment and optical standards, guide plate with the thickness of the guide plate, the thickness of the lamp body with light body, too thin may influence the luminous efficiency of lamps and lanterns and optical and physical parameters, etc
- Q: Why do LED bulbs have stroboscopic frequency? The camera
- There is a difference between the eye and the camera. This is caused by the ripple current, and this general customer will be required. It will be down to 10%
- Q: Can the T5 light tube be free of ballast?
- Your home is long and thin lamp tube connect seat, that is electronic town flow, the element is installed on which small base, some pack on both sides, cannot not have no!
Send your message to us
2Ft 4Ft 5Ft 6Ft 8Ft 90-277Vac Ce Rohs Ul Tuv Led Tube T8 With 3 Years Warranty
- Ref Price:
-
$5.00 - 30.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 10 Pieces pc
- Supply Capability:
- 10000 Pieces per Week pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
