LED Radar Light T8 Tube 12W/3W Sensor Tube 1.2m
- Loading Port:
- Shenzhen
- Payment Terms:
- TT
- Min Order Qty:
- 10 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
LED Radar Light T8 Tube 12W/3W Sensor Tube 1.2m 1. This product meets the standard of CE certification.
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2869 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2869 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li
- Q: The two ballast that originally was electric inductance towed three ordinary fluorescent lamps, now changed to LED fluorescent lamp tube, have influence?
- Remove the inductance ballasts and qi, a lot of LED power supply does not support the front with ballast, if adding the ballast, this product may cause permanent damage to the product. Besides, it is energy efficient in itself, why would you add a ballast in front of you? Just cut it off and OK.
- Q: Can compatible inductance ballast, electronic ballast led fluorescent lamp tube which have to sell?
- I have been able to apply for a patent on the power of led fluorescent lamp which can be compatible with inductive ballast, electronic ballast and direct ac. The loss power of electronic ballast or inductor is about 1W (15W output power).
- Q: What kind of lamp tube is the 2G11 lamp of LED fluorescent lamp
- The T8 / T10 is named based on the diameter of the tube, such as T8 is 26mm and T10 is 30mm. The two g11 is a single and two-tube type, and the lamp can be paired with a single row of four pins, which can also be double-lined
- Q: How long does the energy-saving daylight lamp tube change?
- If a square originally needed a single one to reach the requirement, it now needs to be increased to three to achieve the original brightness. It's normally 3X36 = 108 watts per square root of 36 watts. It turns out that electricity consumption is only 0.036 degrees per hour and now it is 0.108 degrees to achieve the same brightness. The more you open it, the more energy you will consume. Besides, this is without causing damage to the case, the general tubes to use fixed number of year will gradually damaged, bad time change time will be more trouble, so as to compare and calculate a one-time change.
- Q: Help me see the yellow on the left side of the LED fluorescent lamp
- It should be a stabilizer module; The other, the left, 1, 3 is the inductor. 4, 5, 9 is the filter capacitor; 6 is also a capacitor; 7 is a triode; 8 is the transformer.
- Q: What is the distinction between led fluorescent tubes and ordinary daylight bulbs?
- Secondly, LED fluorescent lamp power is small, so compare save electricity, life is long, but the price is more expensive, and common fluorescent lamp power is great, life is not too long, will leak after crushing toxic substances, but the price is cheaper.
- Q: How to remove fluorescent lamp tube
- Rotate the tube 90 degrees and remove from the gaps seen above. Is there a gap between the ends of the lamp holder? If you have to rotate it. If there is no gap, just look at the ends of the lamp holder, a paragraph should be active, you hold the lamp, it toward the activity period of pressure, on the other side can be removed. That's two
- Q: What is the cause of the lights after the led fluorescent lights are turned off
- The second the problem is less But the most easy to test leakage is chip Or a chip resistance capacitance are stored This can be got, through testing machine performance
- Q: Xinda is a popular led lighting tube
- Led fluorescent lights are cheaper and cheaper. The long led fluorescent lighting is a high-end engineering quality, a 12-year brand
- Q: What is the 1.5-meter LEDT5 daylight lamp tube
- It may also be used at the counter, which is about 1.5 meters in length. Actually, the only thing you can do is change the length when you drop the material. I make the special LED fluorescent lamp, the length is 1.9 meters. 2.5 meters and 2.8 meters, 1.5 meters in pediatrics. Ha ha
Focus on environmentally friendly LED intelligent lighting products are obtaining CE, ROHS, CCC and other domestic and international authoritative certification; product sales in the domestic market to maintain continuous growth, and exported to Europe, America, Southeast Asia more than 10 countries.
1. Manufacturer Overview
Location | Shenzhen,China |
Year Established | 2011 |
Annual Output Value | |
Main Markets | Mid East;Western Europe |
Company Certifications |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | Dongguan |
Export Percentage | |
No.of Employees in Trade Department | 50-100 People |
Language Spoken: | Chinese |
b) Factory Information | |
Factory Size: | Above 1,500 square meters |
No. of Production Lines | About 5 |
Contract Manufacturing | OEM Service Offered;Design Service Offered |
Product Price Range | Cheap |
Send your message to us
LED Radar Light T8 Tube 12W/3W Sensor Tube 1.2m
- Loading Port:
- Shenzhen
- Payment Terms:
- TT
- Min Order Qty:
- 10 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords