Wire Braided Hydraulic Hose High Pressure DN6
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Wire Braided Hydraulic Hose
Construction: this hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Applications: this section covers hose for use with petroleum
Temperature range: -40℃ to 100℃
Inner tube: oil resistant synthetic rubber
Reinforcement: double high tensile steel wire braid
Cover: oil, abrasion and weather resistant synthetic rubber
Working temperature: -40-+100 temperature.
Applications: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubrication, emulsion and hydrocarbons etc. It is used for low-medium pressure hydraulic systems in industry and agriculture.
Resistance to ozone and aging,Acid and alkali resistant,Ozone test 72 hours with no cracks.
Its products widely used in coal mine,petroleum,engineering machinery,shipping,machine tool equipment,hydraulic,electric power,building,metallurgy,agricultural machinery,etc.
DN | Hose ID | Wire OD | Hose OD | Working Pressure | Testing Pressure | Burst Pressure | Minimum bend radius | Weight |
mm | mm | mm | Mpa | Mpa | Mpa | mm | Kg | |
6.3 | 6.3±0.8 | 11.4±0.8 | 13.2±1 | 20 | 40 | 60 | 100 | 0.32 |
8 | 8±0.8 | 13±0.8 | 14.8±1 | 18 | 36 | 54 | 115 | 0.38 |
10 | 10±0.8 | 15.4±0.8 | 17.2±1 | 16 | 32 | 48 | 130 | 0.46 |
13 | 13±0.8 | 18.4±0.8 | 20.2±1 | 14 | 28 | 42 | 180 | 0.57 |
16 | 16±0.8 | 21.4±0.8 | 23.4±1 | 12 | 24 | 36 | 205 | 0.65 |
19 | 19±0.8 | 24.6±0.8 | 26.6±1 | 10 | 20 | 30 | 240 | 0.79 |
22 | 22±1 | 28.3±0.8 | 31.3±1 | 9 | 18 | 27 | 280 | 0.9 |
25 | 25±1 | 31.5±0.8 | 34.2±1 | 8 | 16 | 24 | 300 | 1.02 |
32 | 32±1 | 39±0.8 | 43±1 | 6 | 12 | 18 | 420 | 1.31 |
38 | 38±1 | 46±0.8 | 50±1 | 5 | 10 | 15 | 500 | 1.44 |
45 | 45±1 | 53±0.8 | 57±1 | 5 | 10 | 15 | 560 | 1.73 |
51 | 51±1 | 59±0.8 | 62.5±1 | 4 | 8 | 12 | 630 | 1.95 |
64 | 64±1.5 | 72±1.5 | 76±1.5 | 3 | 6 | 9 | 770 | 2.63 |
- Q:What is the rubber sleeve flange connection sleeve?
- Soft rubber joints commonly known as flexible rubber joint, its products are widely used in water, electricity, chemical industry, ship system, the main performance of high pressure resistance, good elasticity (axial, transverse and angular displacement) noise, shock, light weight, convenient installation, flexible use, easy disassembly and maintenance, with acid resistance, oil etc.. The product can be automatically extended during natural weather changes in use. The structure of material by dip outside glue nylon cord cloth with high strength and aging resistance of polar rubber material. In order to prevent the product from shrinking naturally in the long run and to reduce the aging and cracking, the netted steel wire is used for multi body protection.
- Q:Three yuan ethylene propylene rubber joint (high temperature resistant rubber joint) can withstand high temperature
- Three high temperature rubber with high temperature resistance and outstanding resistance to ozone, weather resistant performance, using its unique elastic and ozone in the temperature range -40 ~ 150 degrees of internal energy, weather resistance and other advantages, the suitable seal required for making hot institutions, such as the seal ring light source lamp cover. Valve pad.
- Q:The difference between silicone tube and PVC tube
- PVC pipe is made of polyvinyl chloride resin and stabilizer and lubricant with injection molding machine with hot extrusion molding, main performance, electrical insulation; chemical stability; self extinguished; low water absorption; easy adhesion, high resistant to high temperature of about 40 degrees. Main appliances, industrial gases, liquid transportation, household sewer pipes, water pipes and so on. Environmental issues: plasticizer, antioxidant and other added accessories are toxic, daily in PVC plasticizer, mainly using terephthalic acid two butyl phthalate two formic acid two ester etc., these chemicals are toxic.
- Q:Access toilet water inlet hose joints, how to repair water?
- However, be careful not to hold back too much to prevent the toilet from being cracked. Because before if overwind, or rust, is not open, can only remove the drainage valve inside with a pipe wrench stuck open.
- Q:How can the hose of natural gas be connected to the water heater?
- It should be noted that when the nut is installed, pay attention to each nut must have plastic or rubber soft gasket, gasket must be flat, it plays the sealing role of the joint of the pipe joint.
- Q:My company does high-quality rubber tube, all of the core method, and why use EPDM to do the inner tube, it is difficult to take off the core, please point out! What's the reason?
- Hose core need special tooling, EPDM mandrel and rubber vulcanized rubber tube together will produce covulcanization phenomenon, easy to produce adhesion, so need special disposal to complete stripping, and should adopt non core industrial processing, I is a professional manufacturer of automobile rubber tube there is not clear I can ask each other AC.
- Q:The main features of Linatex rubber tube or what are the characteristics?
- The types and characteristics of Linatex rubber tube:Linatex:95% pure natural rubber is made of fresh latex and processed by liquid phase process. Excellent resistance to wet grinding, super elongation, high strength, resilience and tensile strength.Linard 60: silicon reinforced natural rubber, with high wear resistance, high resilience, cutting resistance, tear resistance and so on.Linatrile: silicone reinforced rubber. It has the properties of wear resistance, oil resistance, aging resistance, fatigue resistance and good air tightness.
- Q:Can the high-pressure rubber hose be followed by water pipes? Will it be poisonous?
- No, because I did not meet the drinking water level requirement!! Hose with drinking water hose!! Drinking for a long time is poisonous!
- Q:Are the bridges, bellows and rubber tubes drawn out or are they drawn only? And the bellows are tensioned with the steel strand?
- The bellows are buried inside the component and do not need to be pulled out. Through reinforcement, only pre-stressed, without tension bellows. When tensioning anchor is completed, grouting work is necessary.
- Q:Must the hose for the cooker be made of oil resistant rubber hoses?
- Yes, the rubber hose link range is required for oil resistance, because of the smoke in the kitchen, a long time will be attached to the rubber pipe, if it is not oil resistant hose is vulnerable to corrosion, resulting in a safety hazard.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Wire Braided Hydraulic Hose High Pressure DN6
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
