VSSJA-2
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Size: DN40-DN4000
Nominal Pressure: PN10/PN16/PN25
Operation Temperature: ≤80°C
Suitable Medium: Water.
2.Feature
Its working principle is installed on the pipeline, tighten the nut, the elastic sealing ring under the nut, the role of the gland. Depend on each other's Angle, compression in the outer pipe seal and connection. Had double nut to lock in the largest scale, once more than its largest scale, will rise to limit, effectively ensure the safety of pipeline operation.
Is mainly used for conveying water, oil, gas and particle powder medium pipeline connection, especially suitable for the vibration or have a certain Angle and in bend pipe connection.
- Q: How about the quality of FITOK valves?
- Purely under the banner of what import, in fact, everyone knows, is the genuine domestic goods.
- Q: What's the name of the valve?
- This is the discharge valve, the lower part of the handle protruding part of the valve is the sealing device. The overall material should be brass, which is typically made by equipment manufacturers.
- Q: I'm going to put a solar energy and an electric water heater installed in the same hot water pipe, a valve, a valve open and close the valve B and vice versa the installation of solar and electric water heater, there can be no linkage valve?
- In industry, you say this, such as using two butterfly linkage and composition of the three-way valve to use. But civilian should be few, demand is very little ah. It is estimated that you can only install two valves and then use both hands at the same time to perform linkage.
- Q: What does the ZH41 valve ZH41 mean, and what other specifications?
- Is the model wrong? The correct one should be Z41HGate valve, hand flange connection name, rod type single gate, sealing surface is alloy steel
- Q: Where is it installed, what is the role, what is the material, and are there other alternatives instead of this effect?
- Main stem to prevent leakage, there are PTFE and graphite and so on. There are no other good products to replace.
- Q: I would like to ask commonly used water valve what kind of? What are the characteristics?
- The valve is usually composed of two parts: the actuating mechanism and the valve bodyAccording to the power used by the executing agency, the valve can be divided into four kinds: manual, pneumatic, electric and hydraulic. According to its function and characteristics, it can be divided into on-off valve, regulating valve, electromagnetic valve, electronic type, intelligent type, etc.According to the type of the body: through single seat, through two seater, angular, diaphragm, three links, eccentric rotation, butterfly, sleeve type, spherical and other 10 kinds of; according to the valve body material: cast iron, cast steel, forged steel, carbon steel, stainless steel, copper, plastic valves.
- Q: What are the technical requirements of valves, such as "Z15W-25T"?
- The first Z represents the gate valve;The second bit is omitted, indicating the handle or handwheel;Third bit 1, indicating internal thread connection;Fourth bit 5, indicating dark wedge rigid single gate;Fifth W, which means the sealing materials are the main body material of the valve;The second paragraphThe first 25, said the nominal pressure is 2.5MPa (valve used in accordance with the pressure level of GB/ 1048, the use of GB/T 1048 standard 10 times the unit of MPa (MPa) value, otherwise the unit value is MPa. If it is a power station valve, the unit value is MPa.)Second bit T indicating copper and copper alloy for the valve body.
- Q: Which valves are installed in a directional manner?
- Regulating valve, stop valve, eccentric butterfly valve, check valve, one-way valve, solenoid valve, pressure reducing valve, drain valve and drain valve. Needle core valve, V ball valve, part of the ball valve, there is flow.Few. Such as floating ball valve, the central butterfly valve does not flow requirements. In general, if the regular manufacturers of valves, flow direction will indicate the flow of medium, to get the valve can see.
- Q: What are the most common types of valves?
- Gate valve, globe valve, check valve, ball valve, butterfly valve, safety valve, drain valve, plug valve, throttle valve, plunger valve, diaphragm valve, relief valve, foot valve, drain valve etc.
- Q: How are the types of valves classified?
- Valve (Famen) is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.classificationFunction and use(1) cut off categories: such as gate valve, globe valve, plug valve, ball valve, butterfly valve, needle valve, diaphragm valve and so on. Cut off valve, also known as closed-circuit valve, stop valve, whose role is to connect or cut off the pipeline medium.Check valves, also known as check valves or non-return valves, check valves belong to an automatic valve, its role is to prevent the pipeline medium backflow, to prevent the pump and drive motor reversal, as well as the leakage of container media. Pump water off the bottom valve check valve also belongs to class.The function of the relief valve is to prevent the medium pressure in the pipeline or device from exceeding the required value so as to achieve the purpose of safety protection.Control valve, throttle valve and pressure reducing valve, its role is to regulate the media pressure, flow and other parameters.(2) vacuum type: such as vacuum ball valve, vacuum flapper valve, vacuum air charging valve, pneumatic vacuum valve, etc.. Its function is to change the direction of the air flow in the vacuum system, adjust the air flow rate, cut off or connect the vacuum system of the pipeline, and the component is called the vacuum valve.(3) special uses such as pigging valves, vent valves, drain valves, exhaust valves, filters, etc.. The exhaust valve is an essential auxiliary component in the pipeline system. It is widely used in boilers, air conditioners, petroleum, natural gas, water supply and drainage pipelines. Often installed in the commanding heights or elbows, etc., to exclude excess gas pipeline, pipe road to improve the use of efficiency and reduce energy consumption.
Send your message to us
VSSJA-2
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords