VC103 Vacuum Cleaner For home use With different accessories
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 unit
- Supply Capability:
- 5000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1. For home use;
2. With different accessories, for different use;
3. Transparent barrel, easy to see the dust volume inside,
can be washed with water, for repeated use;
4. Multiple filter with non-woven fabrics and HEPA;
5. Stepless speed regulation on power
6. Operation radius up to 8.5M;
7. With centrifugal force revolving design, better
performance on dust remove;
8. Technical parameter: 220-240V～ 50/60Hz,
class Ⅱelectrical appliance
Power: 1200/1400W Vacuum degree: ≥19Kpa
Efficiency: ≥16% Noise: ≤76dB
Duct container capacity: 3L Cord Length: 4.5M
Net Weight: 2.1kg Gross Weight: 2.4kg
Package Size (mm): 487x325x317
Loading quantity:588pcs/20’ 1176pcs/40’ 1344pcs/40H
- Q:How do you determine the size of the drill sleeve with a drill diameter of 6?. Thank you
- The bore size of drill sleeve is determined according to F7 tolerance. That is: 6F7,6 deviation: +0.022. deviation +0.010.
- Q:I wonder if it works Because of the large number of drilled holes, the wear of common steel is relatively large. But T10 steel needs quenching. I don't have any specialized equipment here. Usually it is heated by oxygen acetylene, and then it is quenched by oil. I wonder if T10 steel is good. What about the deformation? Outside diameter 15mm, inner hole 8.6MMIf not, what is the best way to do it? Or what to replace?
- As the drill material set is the first choice of bearing steel GCr15, the quenching temperature is 835 ~ {850 cooling medium: oil, the tempering temperature is 150 ~ 170 hardness can reach 61 ~ 65}, GCr15 bearing steel with good hardenability, high abrasion resistance, high fatigue life. In general industry, this material is commonly used as drill sleeves. Carbon tool steel T10 drill can also set {the quenching temperature is 780 cooling medium: water or oil, the tempering temperature is 200 ~ 250 hardness of 60 ~ 64} in the use of performance is far better than GCr15 bearing steel. If there is no professional heat treatment equipment should pay attention to the quenching temperature and tempering temperature, especially the quenching temperature is 835 ~ 850 and I hope to help you.
- Q:Specific depends on what number you are cone sets, you can compare:0 1:19.212 9.0451 1:20.047 12.0652 1:20.020 17.783 1:19.922 23.8254 1:19.254 31.2675 1:19.002 44.3996 1:19.180 63.348
- Not enough detail ah, a few cones are not aware of their comparison, followed by cone sleeve diameter0 1:19.212 9.0451 1:20.047 12.0652 1:20.020 17.783 1:19.922 23.8254 1:19.254 31.2675 1:19.002 44.3996 1:19.180 63.348
- Q:Can the drill jig designed in mechanical processing be without drill bush?
- Less quantity can be without drill sleeveThe drill sleeve is used for drilling, hardening and tempering, and the hardness is improved
- Q:What kinds of drill sleeves are used? What are they used for?
- Drill sleeve can be divided into four kinds, namely: fixed drilling sleeve, interchangeable drill sleeve, fast change drill sleeve, special drill sleeve.Fixed drill sleeve: drill sleeve is directly pressed on the drilling template. The fixing drill sleeve is simple in structure and high in drilling accuracy, but it can not be replaced after wearing. Fixed drill sleeves are suitable for small batch production in a single drilling process.Replaceable drill sleeve: drill is sheathed in the Bush, bushing is pressed on the drilling template, and the drill sleeve is pressed by screw to prevent the drill bush from rotating or withdrawing. When the drill sleeve is worn, loosen the screws and replace them quickly. A single drilling procedure suitable for mass production.Quick change drill sleeve: its structure is similar to interchangeable drill sleeve. When the workpiece in one process has the same hole to be processed by various methods (such as drilling, reaming, reaming, tapping, etc.), the drill sleeve with different apertures can be quickly replaced. When replacing, the drill sleeve gap is turned to the screw and can be taken out.Special drill sleeve: when the structure of the workpiece is not suitable for the use of standard drill sleeve, it can design a special drill sleeve adapted to the workpiece. The height of the drill sleeve is increased by H, the guiding performance is good, the tool rigidity is improved, and the machining accuracy is high, but the abrasion of the drill sleeve and the cutter is intensified, and the H= (1 to 2.5) d is generally taken. The chip space H increases and the chip removal is convenient, but the tool rigidity and the machining accuracy of the hole will be reduced. Cast iron for drilling easier to remove chips, h= (0.3 ~ 0.7) d; drilling difficult to chip out of the steel parts, h= (0.7 ~ 1.5) d.
- Q:I have seen many drilling techniques in practice, and I find that drilling jigs do not have guiding elements (i.e. drill sleeves). Why do not they use drill sleeves in actual production? And I have seen in many books drilling jig, need drill sleeve of the statement, how is this matter?Reaming in our company is also done by drilling machines. Change the drill bit to the reamer. Do you want reaming?I asked the master of the workshop why the drilling fixture does not need to drill, they do not even know what the drill sleeve is, as if they are in the design of drilling machine clamp, there is no drill sleeve concept.I really don't understand why the drilling jig is using drill sleeves If it is for the tool, you can put on a processed product, and then the tool is ok. Why?
- Drilling holes can not use drilling sleevesReaming will not use reaming, and when the diameter of the hole is large, the method of boring is often used
- Q:Drill 4.2 holes, tap 5 thread, choose what kind of drill sleeve
- 5 of the drill bit where to drill ah, with a drill clip on it!
- Q:How should the drill bit of the 4mm bit be calculated?
- The drill bit for the 4mm is generally larger than the drill sleeve about 4 or 0.03Such coordination is more accurateSpecific access to relevant GB requirements
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
VC103 Vacuum Cleaner For home use With different accessories
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 unit
- Supply Capability:
- 5000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
