Ultra Bright White 5050 SMD LED Diode With 3 Chips ROHS Compliant
- Ref Price:
-
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1001 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
5050 smd led/ultra bright white led
Description
5050 SMD LED with 120 Degrees Beam Angle, Various Emitting Colors are Available
1. Part Number: YJ-S5050R3
2. Emitting colors: Red, Green, Blue, Yellow, Pure white and Warm white
3. With 3 pieces chips
4. Beam angle: 120 degrees
5. Various emitting colors are available
6. Peak wavelength: Red: 620 to 635Nm, Blue: 460 to 470Nm, Green: 515 to 530Nm
7. Luminous intensity:
Red: 700 to 1,200mcd
Blue: 400 to 600mcd
Green: 2,000 to 3,000mcd
White: 3,000 to 5,000mcd
8. Forward voltage:
Red: 1.8 to 2.4V
Blue: 3.0 to 3.6V
Green: 3.0 to 3.6V
White: 3.0 to 3.6V
9. Dimensions: 5.0 x 5.0 x 1.5 mm
10. Long lifespan: up to 50,000 hours
11. High-reliability and long life span, low power consumption, energy conservation, environmental protection.
Application
1. Light source for led strip, led modules, LCD, etc
2. Signal lighting for telephone, fax, computer and other electronic equipment
3. Backlighting and decoration lighting
Technical Parameter
| Part Number | Chip Material | Lens Type | Emitting Color | Forward Voltage | Dominant Wavelength | Luminous Intensity(mcd) | IF (mA) | Viewing Angle | |||
| TYP | MAX | MIN | MAX | MIN | MAX | TYP | Δθ | ||||
| S5050R3 | AlGaInP | Water Clear | Red | 1.8 | 2.4 | 620 | 635 | 700 | 1200 | 60 | 120° |
| S5050G3 | InGaN | Water Clear | Green | 3 | 3.6 | 515 | 530 | 2000 | 3000 | 60 | 120° |
| S5050B3 | InGaN | Water Clear | Blue | 3 | 3.6 | 460 | 475 | 400 | 600 | 60 | 120° |
| S5050Y3 | AlGaInP | Water Clear | Yellow | 1.8 | 2.4 | 585 | 595 | 700 | 1200 | 60 | 120° |
| S5050W3 | InGaN | Water Clear | Pure White | 3 | 3.6 | / | / | 3000 | 5000 | 60 | 120° |
| S5050WW3 | InGaN | Water Clear | Warm White | 3 | 3.6 | / | / | 1500 | 2500 | 60 | 120° |
Samples test report:
| No. | Item | Testing conditions | Test cycle | Test samples no. | Ac/Re |
| 1 | Tin-plated test | Temp. 260°C±5°C | 5 secd. | 76 PCS | 0/1 |
| 2 | Back & forth test under high & low temp at intervals | High temp. +85°C30min to 5min to -55°C30min | 50 bout | 76 PCS | 0/1 |
| 3 | Heat pounding test | High emp. +100°C30min To 10sec to -10°C30min | 50 bout | 76 PCS | 0/1 |
| 4 | High storage temp. | Temperature 100°C | 1000 Hr. | 76 PCS | 0/1 |
| 5 | Low storage temp. | -55°C | 1000 Hr. | 76 PCS | 0/1 |
| 6 | Life span test | VF=1.9V IF=20mA | 1000 Hr. | 76 PCS | 0/1 |
| 7 | Test under high temp.& high Humidity | 85°C/85%RH | 1000 Hr. | 76 PCS | 0/1 |
Quality control
Before the order confirmed finally,we would strictly check the material,color,dimension of the sample step by step
We salesman,also as an order follower,would trace every phase of production from the beginning
We have a QC team,every product would be checked by them before packed
We would try our best to help clients solve problems when they occurred.
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: 0603，0805，1206，3020，3528，5050，355 what is the current and voltage of these patch LED? Please give advice!
- The patch LED is also called SMD LED. Its principle of luminescence is to pass the current through the compound semiconductor. Through the combination of the electron and the hole, the excess energy will be released in the form of light to achieve the effect of luminescence.
- Q: What is the principle used in SMD LED lamp, should pay attention to what the problem?
- LED white is the light emitting diode, a PN junction to the most important use of SMD beads is the heat, according to the different manufacturer beads, glue package is not the same, should pay attention to pre baking time and temperature, the latter should pay attention to the patch temperature, the most important is the price, many manufacturers in order to cost savings, internal chip used is too small does not meet the standards, support steal frugal material, with iron, the failure cycle shortened, LED lamp can not reach the ideal effect. Again, the LED supply current must not exceed the rated value, which is an important factor in damage to lamps and lanterns
- Q: Indoor full color LED display module and LED what is the difference between a full color?
- (1): LED full color light emitting module display module is generally yellow green, pure green module price is more expensive; SMD full color LED display using pure green tube coreThe display module (2): LED full color pixel visual feeling is thick, low brightness, easy to have the mosaic phenomenon; patch LED full color consistent, high brightness;(3): maintenance module LED full color display is not easy to maintain, the whole module replacement cost is high; SMD full-color LED screen for easy maintenance, repair and replacement of single lamp;
- Q: Which is good for LED patch and LED bulb?
- Chip LEDLED patch lamp (SMD) is made of FPC circuit board, LED lamp and high quality silica gel sleeve. Waterproof performance, using low voltage DC power supply is safe and convenient, light colors, bright colors; outdoor use can be anti UV aging, yellowing, high temperature resistance and other advantages, the products are widely used in building lights, decorative lighting, advertising and entertainment quasi decorative lighting lighting field.LED bulbThe light emitting diode, is capable of converting electrical energy into visible solid semiconductor devices, which can be directly converted into electricity to light; LED Large Electronic = Display, LED = large electronic display; Lupus erythematosus disseminatus, systemic lupus erythematosus, a chronic idiopathic autoimmune disease; LED lead the past and past participle, meaning "leadership, led the Russian Pulkovo Airport IATA code.
- Q: Does anyone know what the current rating of a white high brightness LED patch is? Where can I find out?
- The high power 1W is 350MA, and 3W is 700MA. They are all fixed and can be found everywhere.
- Q: Patch LED features
- The seismic resistance, high reliability, low operation cost system.It is easy to small, thin, lightweight, easy to shape without restrictions, made all kinds of application.
- Q: What is the difference in performance between the LED plug-in and the LED patch?
- 1, the patch is relatively easy to heat dissipation, can be directly welded on the aluminum substrate, heat faster.2, in general, there is a straw type shell, general lighting has front facing directivity, just look at it, brightness will be the biggest. The patch has a relatively wide divergence angle and is more suitable for fluorescent lamps.
- Q: LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?
- They differ in form and belong to the SMDLED category. Encapsulation uses liquid silicone and epoxy resins as well. The patches are basically made of epoxy resin. Relatively speaking, the amount of liquid silica should be relatively large.
- Q: How do led patches measure good or bad?
- The patch LED is also called SMD LED. Its principle of luminescence is to pass the current through the compound semiconductor. Through the combination of the electron and the hole, the excess energy will be released in the form of light to achieve the effect of luminescence.
- Q: SMD LED lamp working voltage?
- Voltage range of white LED lamp: 3.0-3.4VThe pressure drop of the red LED is 2.0--2.2VThe yellow light emitting diode has a pressure drop of 1.8 - 2.0VThe green light emitting diode has a pressure drop of 3 - 3.2VThe blue light emitting diode has a pressure drop of 3.0-3.4VSMD voltage is basically the same as double lead line. Current is generally 20~60mA, and some work current can exceed 100mA.
Send your message to us
Ultra Bright White 5050 SMD LED Diode With 3 Chips ROHS Compliant
- Ref Price:
-
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1001 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
