Turbo Charger Automotive Hose for Gas Auto
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product details
Basic Info.
Model NO.:1/4"-12"
Material:Nitrile Rubber
Color:Black
Capability:Rubber Oil Hose
SAE Standard:ID From 6mm to 127mm
DIN Standard:ID From 6mm to 127mm
API Standard:ID From 51mm to 152mm
Export Markets:Global
Product Description
High Pressure Rubber Hose
CONSTRUCTION:
This hose consists of an inner tube of oil synthetic rubber, mutipule wire braid or spiral as reinforcements, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubricants, emulsion, hydrocarbons etc.
WORKING TEMPERATURE: From -40° C up to +100 ° C
Standard: SAE, DIN, API, GB/T3683, GB/T10544 GB/T24145
This is the intercooler intake hose, which contains the material silicone and fluorine. The inner tube
uses the FKM and the outer one with the VMQ. The reinforcement is aramid.Our products are well produced and we have done such test programs:
1)Test items:Performance
2)Hardness:60±5 Shore A
3)Tensile strength:≥12Mpa
4)Elongation:≥200%
5)Burst strength:≥1.0Mpa
6)Adhesive strength:≥3.0KN/M
7)Pulse capability:The inner temperature190
FAQ
.Q: Are you a factory or trading company?
A: We are a factory.
2.Q: Where is your factory located? How can I visit there?
A: Our factory is located in Hangzhou City, Zhejiang Province, China, about 1.5 hours train from Shanghai. All our clients, from home or abroad, are warmly welcome to visit us!
3.Q: How can I get some samples?
A: We are honored to offer you samples.
4.Q: How does your factory do regarding quality control?
A: Quality is priority. PASSION people always attach great importance to quality controling from the very beginning to the very end. Our factory has gained the Authentication of CE, ISO, SGS, TUV etc.
- Q: What is the ratio of carbon black in automobile tire rubber?
- Carbon black is a reinforcing filler of important system, have an important impact on the physical and mechanical properties and processing technology of rubber, but for the influence of rubber heat resistance, oil resistance, corrosion resistance and other properties of the medium, far less than the rubber vulcanization system and protection system of large and direct. Because of this reason, the general formula personnel specific performance index of carbon black carbon black as a technical staff attention, often only pay attention to selecting a type of carbon black, without detailed investigation using specific indexes of carbon black, or by different kinds of carbon black and carbon black, and no machine and used to packing product requirements. Therefore, it is difficult to quantify the impact of specific physical and chemical indicators of carbon black.
- Q: What are the properties of rubber used in automobile tyres?
- The use of rubber elastic shock absorption, as well as abrasion resistance
- Q: What's a bumper block?
- The buffer blocks of different structures have some different functions. For a passenger car, a shock absorber with a helical spring can act as a first stage vibration absorber to prevent the external shock from acting directly on the shock absorber, thereby prolonging the life of the shock absorber.
- Q: What are the applications of rubber airbags in the automotive field?
- Sealing system is mainly used to prevent leakage of liquid or other materials, including O ring, rotary shaft oil seal, sealing strip, dust cover, flat gasket and so on. Seals are sometimes made of metal, plastic, or fabric, but more of them are made of rubber. In the early 80s of last century, the United States successfully developed PTFE composite oil seal, successfully solved the problem of engine oil leakage, water leakage, and at the same time greatly improved the technical performance of the car. When the engine and transmission system uses oil series lubricants, the sealing material is usually made of butyl rubber (NBR), acrylic rubber (ACM), silicone rubber (VMQ) or fluorine rubber (FPM).Engine oil requires long life, low viscosity (oil saving), smooth lubrication at high temperature, so engine oil usually contains a variety of additives. Long time soaking HNBR, FPM and ACM at high temperature in an additive containing oil, can maintain high compressive strength. The hydrogenation of chloroprene rubber (HNBR) in which several rubber additives on resistance is the best, at the same time by Ding Xiangjiao (HNBR) heat resistance, oil resistance, aging resistance, is rubber products, currently used in high performance auto parts have been widely. For a long time, the automotive industry has been using NBR and cork rubber to make gaskets for engines, but now uses ACM and VMQ as the main material to satisfy the requirements of heat resistance, sealing capacity and compression durability.The fuel pump diaphragm is a typical fuel pump structure in the carburetor system. The diaphragm has to withstand the thermal impact of the engine and therefore requires not only good durability in the gasoline but also high heat resistance. Because of the need for oxidation resistant gasoline, NBR, HNBR and FPM are available for shock absorbers, insulators, and oil seals in the case of seals. As to which material to choose, the temperature depends on the specific temperature.
- Q: How to fill the car tires? What's the difference between using glue strips and making up from the inside?
- Rubber tire repair tools repair belongs to the emergency, you buy a car air pump will receive a few strips, temporary will tire at low speeds up, then to the nearest garage or repair shop to fill in.The internal compensation, belongs to the normal operation, long-term use will not affect traffic safety, leakage of small mouth (by nail punctured the class of objects) can be directly in the inner side of the tyre patch, leakage bigger mouth, need to use pins from the inner tire tire leakage, too big mouth can not be repaired, only void, replace the new tire.
- Q: When I opened the hood of the car today, a black rubber fell on it. I couldn't see it. What should I do?
- This thing is to prevent the engine head cover and engine compartment contact, play a buffer role. If you drop it, go to the 4S shop and get one, something worthless.
- Q: Why should rubber be used as a tire?
- Rubber raw materials wide source, easy processing, comfortable use, friction resistance
- Q: What is the difference between the bottom rubber and the foot pad?
- When it comes to floor sizing, all the chairs should be removed, whether they are hand sewn or shaped, and they will be a whole after they are finally put on the bus.Car mats are not the same, are generally five, and now popular Ottomans are special car, that is to say, in general, it is necessary to shop a layer of glue, and then buy a foot pad shop. Because if you want to dismantle the earth glue, it is necessary to dismantle the seat, inconvenient, and it does not dust, no water absorption. The Ottomans are small in size and easy to disassemble. When the pads are dirty, they can be cleaned as soon as they are taken down, while the pads have a protective effect on the glue or carpet of the car.
- Q: How long does the car seal need replacing?
- Car door and body seal is a more difficult parts, sealing requirements are relatively strict, should be sealed part of relatively long, each seal section of the shape is not the same, and the door is open and shut frequently. 3 - and 4 - way seals are installed on the limousine, and the four - fold sealing structure for the front column and the side of the roof is provided. This multi-channel seals are generally arranged in the front door seam, in addition to the sealing function, there is the role of car noise reduction.
- Q: What's the tire composition?
- According to the air pressure in the tire, the inflated tire can be divided into three types: high pressure tire, low pressure tire and ultra low pressure tire. Low pressure tyres are widely used in all kinds of cars.According to the different structure and structure, the pneumatic tire is divided into two kinds: inner tube tyre and tubeless tyre. Tubeless tires are widely used in cars. The tyre can be divided into two kinds of radial tire and bias tyre according to the arrangement of the tire inner ply and buffer layer.Radial tyres are commonly used on automobiles. The sides of the tyre are marked.
Send your message to us
Turbo Charger Automotive Hose for Gas Auto
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
