16-20inch inner tube tires 1.Made by butyl 2.Packed in carton 3.for truck 4.ISO9001,HQC
inner tube tire
1. Material: Natural or Butyl
2. Brand: CMAX or we can print your name on the tube
3. Performance: Good air tightness, anti-aging, anti-corrosion, excellent wearing resistance and good appearance.
4. Tensile strength:8MPa, 10MPa, 12MPa, 15MPa
5. Elongation at break: more than 500%
6.Used for PC inner tube,TBR inner tube,OTR inner tube,AG inner tube,LT inner tube,turcks and busses inner tube.
9. Packing: plastic bag and weaving bag or according to your request
10. Customers: North America, Middle East, South Asia, Africa.
Factory Information:
1. We are located in the west coast of Qingdao, covering the land of 20000 sq meters, there is only 120km to Qingdao Port, so we are with superior geographical and convenient transportation.
2. There are more than 2000workers and including 140 technicians, and can supply the product as your design, and do your own brands.
3. Our Price Promise means we will not be beaten on price and quality. We guarantee to refund any item you are not completely happy with when you return it.
4. High level of customer service and repeat customer orders of our products.
5.We are the biggest supplier in China because our daily output is more than 40000pcs
6.We aim to be the No.1 in China.
Tractor oriented tire inner tube
specification
valve
specification
valve
GB3900-91
TRA
GB3900-91
TRA
4.00R12
Z1-02-1
TR13
4.50/5.00R14
Z1-02-1
TR13
4.50/5.00R12
Z1-02-1
TR13
4.50/5.00R16
Z1-02-1
TR13
6.00R12
Z1-02-1
TR13
4.50/5.00R16
Z1-01-2
-
5.50/5.60R13
Z1-02-1
TR13
5.00/5.50R16
Z1-02-1
TR13
5.50/6.00R13
Z1-02-1
TR13
6.00/6.50R16
Z1-02-2
TR15
6.00R13
Z1-02-1
TR13
6.50R16
Z1-02-2
TR15
4.00/4.50R14
Z1-02-1
TR13
6.50R20
Z1-02-1
TR13
4.50/5.00-10
Z1-02-1
TR13
driving tire
specification
valve
specification
valve
GB3900-91
TRA
GB3900-91
TRA
7.50R16
Z1-02-2
TR15
12.4R28
Z1-03-1
or TR218A
7.50R20
Z1-02-2
Z1-01-1
13.6-28
Z1-03-1
or TR218A
9.5R20
Z1-03-1
-
14.9R30
Z1-03-1
-
10.00R15
Z1-03-1
-
16.9R30
Z1-03-1
-
8.3/9.5R24
Z1-03-1
-
18.4R38
Z1-03-1
-
14.9R24
Z1-03-1
-
20.8R38
Z1-03-1
-
15.5R20
Z1-03-1
Q: How does the ceiling fabric come off?
The top of the car is covered with polyurethane glue.
Q: What is the ratio of carbon black in automobile tire rubber?
Carbon black is a reinforcing filler of important system, have an important impact on the physical and mechanical properties and processing technology of rubber, but for the influence of rubber heat resistance, oil resistance, corrosion resistance and other properties of the medium, far less than the rubber vulcanization system and protection system of large and direct. Because of this reason, the general formula personnel specific performance index of carbon black carbon black as a technical staff attention, often only pay attention to selecting a type of carbon black, without detailed investigation using specific indexes of carbon black, or by different kinds of carbon black and carbon black, and no machine and used to packing product requirements. Therefore, it is difficult to quantify the impact of specific physical and chemical indicators of carbon black.
Q: Why should rubber be used as a tire?
Because rubber doesn't break easily
Q: How are the car tyres made?
The car the whole tire is not too humble, but tire for vehicles, like shoes for people, its importance is absolutely not. We understand the tire production process, help to enhance your Goodyear brand trust. Process 1: dense process, refining process is to carbon black, natural / synthetic rubber, oil, additives, accelerators and other raw materials mixed together, in the mixer for processing, the production of "glue" process. All raw materials must be tested before entering the mixer and can be used after being released. The weight of each mixer is about 250 kilograms. Each rubber component used in the tire is of a specific property. The composition of the rubber depends on the performance requirements of the tire. At the same time, the change of the composition of the rubber depends on the needs of the manufacturers and the market. These requirements mainly come from traction, driving performance, road conditions and the requirements of the tires themselves.
Q: What is the density of rubber in car tires?
The landlord asked about the raw material used to make tires, rubber or mixed rubber
Q: Can the waterproof sealing strip for sunroof glass be changed?
Pay attention to the aging and deformation of the slide rail.Skylights used for a long time, in its slide, gap, usually there will be a lot of sand deposition, if not cleaned regularly, it will wear sunroof components.Operation 1: for electric sunroof, in the bumpy road, it is better not to open the sunroof completely, otherwise it will cause the deformation of the relative parts because of the vibration between the skylight and the slide rail, and even damage the motor.Operation 2: clean drain pipe and proper lubrication rail every two years.Should be cleaned regularly around the slide, usually in the use of 2 to 3 months, the rail with gauze stained with clean water cleaning, and after wiping clean, apply a little oil or butter on it.Operation 3: when the vehicle is ready for long-term parking, it is necessary to thoroughly clean the skylight track with talcum powder, so as to avoid the long time and cause the chemical reaction of the sealing ring in the air to cause the ageing.
Q: The car tire is pressing on the stone, the rubber of the tire is all broken, the heroes see can still use?
The advantage of the patch method is that the patches are strong and do not hurt the crown. However, because the patch is from inside the tire, the tire hole still, so the water may damage from the immersion wire and ply; and, if the hole is large enough, sand and other sharp objects from the hole of the patch may be punctured, it is only suitable for small tire damage. Also, due to the internal patch will tire unloading, separation of tires and wheels, mended to go, so a long time to complete the whole tire.
Q: Full coverage of car mats that kind of material better?
The fully covered floor mat is developed on the basis of large surround and is now the most popular car floor mat. Fully enclosed mat Market, the use of synthetic leather or microfiber skin, natural rubber synthetic PVC, natural environmental protection synthetic rubber XPECommon automotive full cover mat materials are leather, rubber, VSQ, PVC, environmental protection, XPE and super fiber skin.
Q: The car's tires are made of rubber. Is that right?
As for the black face of the tire, it was because of the addition of carbon black in the rubber. Carbon black has excellent reinforcing property to rubber, which can give good wear resistance of tire. But now, besides carbon black, there is a better reinforcing agent, silica. The successful launch of Michelin green tire in 1992, as a partial replacement of silica soot into the tire tread, silicon helps without lowering the tire grip (especially on slippery road) and wear resistance under the premise of reducing rolling resistance.
Q: What's the black inside of the car seal?
Sealant can be used with paper pad can also be coated directly on the shell surface for the rubber pad, can also use its own viscous, visco plastic film, my JAC light truck door inside there is a layer of film, using this black glue, like on the bus glass is also used the adhesive on the glue, I have seen the two colors, red and black, but the performance is the same! The garage is for sale!
We may place cookies for analysis of our visitor data, to improve our website and measure advertising performance. Overall this data is used to provide a better website experience.
