Steel Gate Valve with Good Price on Hot Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Gate Valve Description:
A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.
2. Main Features of the Gate Valve:
• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber
• Free of water pollution
• High manufacturing accuracy
• High strength
• Environmental protection and energy saving
• Good visual effect
3. Images
4.FAQ
1. What's are the characteristics of gate valve?
The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel.
2. What is the work principle of gate valve ?
The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.
3. What is the structure?
Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.
- Q:In the decoration, I do not know where to get the valve, what kind of products should be bought?It is hard to fit the valve in the water inlet of the house. If not, can you? Will it have any effect on future use?
- There are two types of valves used for decoration:1. inlet pipe valve: general use of ball valve, can adjust the size of water.2. triangle valve for soft tube: used for water tank, basin, bathtub, toilet, water heater hose and water connection.The water valve is best fitted to facilitate overall or partial maintenance.
- Q:Valve connections - two how do different connections work?
- The inlet and outlet of valve are respectively connected in two different ways: one end adopts flange connection, the other end adopts thread or socket.
- Q:According to the original valve installed on it, but never demolished, I am afraid to force over, will not be broken? The old valve, that part of the remaining three tubes tight.
- 1. Prepare the glue and saw blade. Disengaging bracket.2, using a hand saw from the valve mouth (spool near) transverse incision.3, the center will be on the move, the longitudinal incision, be careful not to damage the inner tube.4. Clean the pipe mouth, pipe and new valve coating, install the valve.Turn left and turn right |
- Q:There is a rectangular hole in the valve core, which the heating company repairman gives to the bolt. Rest assured, I do not want to heating, but my indoor temperature is low, I suspect that the repairman mischief, deliberately give me lower temperature
- The valve has a device resembling a cylinder lock without a dedicated key. However, your home heating is not hot, the valve does not have much relationship. As long as the hole on the valve is parallel to the pipe, the valve is fully open.
- Q:Where is the hydrant main valve?
- The intake valve of the upper and lower ring pipes of the riser of the fire hydrant is generally located at the highest and lowest floors.The general use of the valve rod flange gate valve.Hydrants, officially called fire hydrants, are a type of fixed fire fighting facilities, which control fuel, insulate fire and eliminate fire. Indoor fire hydrant and outdoor hydrant. The fire fighting system includes outdoor fire hydrant system, indoor fire hydrant system, fire extinguisher system, and some automatic sprinkler system, water gun system, gas fire extinguishing system, fire detection system, water mist system and so on. Fire hydrant mainly for fire engines from the municipal water supply network or outdoor fire water network to implement fire fighting, can also be directly connected to the hose, water gun fire extinguishing. Therefore, indoor and outdoor fire hydrant system is also one of the important fire fighting facilities.
- Q:What is the purpose of the valve?
- 3. Change the direction of the medium flow in the pipeline. Such as the distribution of valves, three way cock, three or four ball valve etc..4, stop the medium back flow in the pipeline. A variety of different structures such as check valve, valve etc..5, separation medium. Such as different structures of steam traps, air traps and so on.
- Q:What's the valve specification DN20?
- You should be asking, how many inches?DN20 is 3/4
- Q:Which valves are installed in a directional manner?
- There are balance valve, safety valve, pressure relief valve
- Q:What are the technical requirements of valves, such as "Z15W-25T"?
- The first Z represents the gate valve;The second bit is omitted, indicating the handle or handwheel;Third bit 1, indicating internal thread connection;Fourth bit 5, indicating dark wedge rigid single gate;Fifth W, which means the sealing materials are the main body material of the valve;The second paragraphThe first 25, said the nominal pressure is 2.5MPa (valve used in accordance with the pressure level of GB/ 1048, the use of GB/T 1048 standard 10 times the unit of MPa (MPa) value, otherwise the unit value is MPa. If it is a power station valve, the unit value is MPa.)Second bit T indicating copper and copper alloy for the valve body.
- Q:Why is the valve on the pipeline not the same size as the pipe, and how much of a crude pipe can be given? Thank youI'm sorry, I didn't make it clear that when doing pipe work in the factory, for example, 60 of the pipe, and in this pipeline to install the valve to choose DN50, and so on.
- The valves on the pipe should be of the same size, which saves costs and reduces head loss.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Steel Gate Valve with Good Price on Hot Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords