Solar Panels US - Polycrystalline Silicon Solar Modules 60cell-240w
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 10000000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Polycrystalline Silicon Solar Modules 60Cell-240W Description
Solar panel refers either to a photovoltaics (PV) module, a solar hot water panel, or to a set of solar photovoltaics modules electrically
connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be
used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each
module is rated by its DC output power under standard test conditions, and typically ranges from 100 to 320 watts. The efficiency of a
module determines the area of a module given the same rated output – an 8% efficient 230 watt module will have twice the area of a 16%
efficient 230 watt module. There are a few solar panels available that are exceeding 19% efficiency.
2. Main Features of the Polycrystalline Silicon Solar Modules 60Cell-240W
• WARRANTIES
- 10-year limited product warranty1.
- Limited power warranty1: 1 year at 98% of the minimal rated power output, 10 years at 92% of the minimal rated power output, 25 years at
82% of the minimal rated power output.
Successfully endureü ammonia and salt-mist exposure at the highest severity level, ensuring their performance in adverse conditions.
- High efficiency, multicrystalline silicon solar cells with high transmission and textured glass deliver a module effi ciency of up to 16.0%,
minimizing installation costs and maximizing the kWh output of your system per unit area.
3. Polycrystalline Silicon Solar Modules 60Cell-240W Images
4. Polycrystalline Silicon Solar Modules 60Cell-240W Specification
窗体顶端 Electrical parameters at Standard Test Conditions (STC)窗体底端 | |||
Power output | P max | W | 240 |
Power output tolerances | ΔP max | W | 0 / + 5 |
Module effi ciency | η m | % | 14.8 |
Voltage at Pmax | V mpp | V | 29.3 |
Current at Pmax | I mpp | A | 8.18 |
Open-circuit voltage | V oc | V | 37.5 |
Short-circuit current | I sc | A | 8.75 窗体底端 |
5. FAQ of Polycrystalline Silicon Solar Modules 60Cell-240W
Q1:Can we visit your factory?
A1:Sure,welcome at any time,seeing is believing.
Q2:Which payment terms can you accept?
A2:T/T,L/C,Moneygram,Paypal are available for us.
- Q: Ok so i can have a problem i have two 5 watt 2 volt solar panels a 2 volt battery and a 400 watt ac 2 volt dc inverter i believe im only getting 5 watts from from my solar panels thats the equivalent of one is there any way i could get full voltage from my solar panels without theoretically burning my wallet.. please help
- I think you need to take some basic courses on electricity. Usually, 8 volt solar panels are required to charge 2 volt batteries. The voltages of photovoltaic cells are set by the material they are made of, only current changes. If you hook up a 2 V solar panel to a 2 V battery, no current will flow, nothing would get charged. You would need some elaborate DC to DC voltage converters to charge a 2 V battery from 2 V solar panels. Solar panels can be connected in parallel or in series, as you've made the mistake of buying 2 V solar panel, you would have to wire them in series and have a charge controller that could limit the voltage of the charge. Did it ever occur to you that two 5 watt solar panels would not be able to provide the power needed by a 400 watt inverter? You're just running off your battery with your set up. Solar power is expensive power, you can not have solar without burning a hole in your wallet.
- Q: what size would the panel be/ I live in the caribbean so plenty of sun!
- You will need several panels and it will be expensive.. That's if you are running your pump for 4 hours each day.. You will really need a battery bank to give you Amps and or Watts.. The motor when starting will need up to 5 amps at once if not more... Too much for a solar panel by it's self and even 4.. maybe five would do it At watt per solar panel.. I am not a genius on this issue but there are base lines..
- Q: I have a playstation PSP charger that is 5v 2A, so it takes 0 watts.I have several small solar panels that put out watt a piece and are 4 volts, 250mAhow can I get my 0 watts to be 5v 2A instead of 4v 250mA? the voltages have to match up right?also, what's a 3-T regulator that controls voltage?
- The first item is whether the psp charger output is ac or dc. IF, AC then you are stuck as the panels put out DC. (Increasing the voltage enough to cover invertor losses is not practical in this instance!) IF DC, then you need to combine panels to produce 2 Amps, after which it is run through the 3 terminal VOLTAGE regulator to limit the voltage to 5v. That is 8 panels in parallel in 2 groups placed in series = 2amps at 8 volts, then add regulator for 2 amps at 5v. (Parallel increases amps, series increases volts.) Total panels required is 6 panels.
- Q: This is the cenario. Your yearly energy use comes by mail and it states that the total amount of energy used your household is 7000kWh.Then you make the decision of switching to get solar panels. The question is what area should your solar panel be given that the average annual length of daylight is 2.0.
- It is not that simple. There are 3 main types of solar cells. Monocrystalline silicon is the most efficient and produces the smallest solar cells, and therefore the smallest panels. Poly-crystalline (or multi-crystalline) silicon produces the next most efficient type of cells and are a popular choice. Amorphous (or thin-film) silicon uses the least amount of silicon and also produces the least efficient solar cells. This means thin film system take up more area than the other two; an important factor to consider in relation to possible future upgrades; i.e. if you'll have enough space left to do so. The North (in the Southern hemisphere) or South (in the Northern hemisphere) facing roof collects the most energy. So this biases the roof area required. Your energy usage can be changed. Hot water (a major energy user) could be better using direct solar heating with peak demand boosting, either from mains or solar. There are other possibilities, either to reduce demand or to provide energy from other sources. Not all sunshine hours are equal. Hours around midday are far more productive than hours later in the day. This must be factored in.
- Q: How do solar panels affect the resale value of a home?
- Solar panels can have a positive impact on the resale value of a home. Studies have shown that properties with solar panels tend to sell faster and at a higher price compared to homes without them. Potential buyers view solar panels as a valuable and eco-friendly feature, leading to increased buyer interest and willingness to pay a premium for a home equipped with solar power.
- Q: Someone Said It costed them 50,000 To Install Solar Panel In their House and 35,000 For Installation. Is that true?
- It depends on the number and size of the panels. The minimum charge for a small bungalow would be at least $20,000 labor and material.
- Q: Can solar panels be installed on a shipping container?
- Yes, solar panels can be installed on a shipping container. In fact, it has become a popular choice for off-grid and remote locations where traditional grid connections are not feasible. The flat roof surface of a shipping container provides an ideal platform for installing solar panels, allowing for sustainable energy generation in various applications.
- Q: Can solar panels be installed on a historical building?
- Yes, solar panels can be installed on a historical building. However, the installation process should be carefully planned and designed to minimize any potential impact on the building's historical integrity. It is important to consult with experts and adhere to any local regulations or preservation guidelines to ensure a harmonious integration of solar panels without compromising the building's historical value.
- Q: Any opinion on harbor freight solar panels ?
- Actually, if you are looking to start slow and inexpensive, they are an economical way to get your feet wet, so to speak. I also tried the make them yourself kits, where you get a stack of cells, a frame and solder and you have to get the glass and assemble it yourself. I combined the Harbor Freight kit with one of those panels. Problems you will run into start with the kit having no inverter and not much information on any kind of power storage, you get to work that out for yourself. I initially wired them to provide all the power for the ceiling mounted lights in a small house, on a totally independent circuit, using 3 car batteries for storage. It worked perfectly, however the code inspector I got from the City could NOT fathom that my system had no connection whatsoever to his grid and would not pass it, even though I showed him the separate breaker box that was not supplied by the line coming into the house for the rest of the power. I finally gave up on him and put the lights back into the main system and use the solar setup to charge cell phones and occasionally power a lamp, as the inverter has plugs right on it. It keeps those car batteries fully charged going on 4 years now, with no issues detected at all.
- Q: name things someone could use solar panels for or make with solar panels? (use solar energy i mean?)
- Solar panels can bee installed into your houses or apartments power box (if it's outside). But Solar panels cost more than $00 so i hope you saved up.
Send your message to us
Solar Panels US - Polycrystalline Silicon Solar Modules 60cell-240w
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 10000000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
