SMC Sheet with Strong Fire Resistance/Colorful SMC/SMC FRP Sheet for Construction
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 m²
- Supply Capability:
- 5000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction
SMC is the short form of sheet mounding compound. This is a raw material for mold pressing. The core is chopped strand and unsaturated polyester resins paste that are covered by LDPE & HDPE sheet. It is 3mm-6mm thick , 600mm-1200mm wide and packing in rolls or boxes. When using , be sure to cut , weigh , uncover film, and join in the heat up mould, after adding high pressure and preserve a time, then you can take off membrane to get the product.
Feature
Higher mechanical strength
Excellent leak-proof electrical
Excellent thermal stability, chemical corrosion resistance
Low water absorption, good dimensional stability, war page small
Reliable arc resistance and voltage withstand, high dielectric strength
Specification
Product name | Fiberglass Reinforced Polyester Corrugated Sheet |
Material | High-performance protective film, unsaturated polyester resin, fiberglass |
Layer | 1 layer |
Width | 900mm,930mm,1100mm |
Thickness | 0.8mm,1.0mm,1.2mm,1.5mm,2.0mm,3.0mm |
Length | 5800mm,11800mm or customized according to requirement of customers |
Color: | Clear, Red, Yellow, Green and opal |
Guarantee: | 10 years |
Certification: | ISO9001 SGS ROSH |
Delivery time | 5-7days(general) depend on the style and quantity |
detail features | 1.The light transmission It is between 60-85%. Light through FRP lighting sheet scatters and is mild. It will not form a light band so as to make the indoor brighter. |
Advantage
Solution of wood steel plastic meter box easy to aging, easy corrosion, poor insulation, poor cold resistance, poor flame retardant, the short life of the shortcomings
Absolute seal waterproof performance, corrosion resistance
Beautiful appearance, long service life
Application
1. Application in automobile industry
(1) Suspension parts, front and rear bumpers, instrument panels and the like
(2) Car body and body parts, body shell, hard shell roof, floors, car doors, cooling air grille panels, fore plate, spoiler, luggage hatch cover, sun shade, SMC fender, engine bonnet, headlight reflector
(3) The engine cover under parts such as air conditioner shell: wind shield, the intake manifold cover, Fan vanes ring, heater cover, tank parts, brake system components, and the Battery bracket, engine noise barriers and so on
2. Application in rail vehicle
SMC railway vehicles, window frames, bathroom components, seat, coffee table tops, SMC compartment wall and SMC roof
4. Application in architectural engineering
Water tank, bathes the thing, purifies the trough, building templates, storage component
5. Application in the explosion-proof electrical equipment shell
FAQ
1. How's the payment?
Telegraphic Transfer(T/T) or Letter of Credit(L/C)
2. Do You Arrange Shipment?
Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.
3. How is the package?
Usually, we arrange the standard out-package for exporting.
FACTORY
PACAKGE
- Q: Where are the differences between the products made of stone and resin?
- The real stone is natural and is generally used for outdoor decoration. The products made of resin materials are synthetic, such as artificial marble, kitchen countertops, toilet toilets, washbasin and bedplate.
- Q: Is the gas released from the heating of the SMC sheet poisonous?
- SMC sheet is made of unsaturated polyester resin, glass fiber and aluminium hydroxide powder by certain process
- Q: What is the difference between plastic die casting and compression molding? Please be specific
- Equipment: simple, but also the main features of plastic equipment. The two halves of the platen are joined together to heat and pressurize the material into a predetermined shape. Most pressing processes are hydraulically operated; pneumatic operations are also used. On the two plate moves in the 4 corner posts up and down under pressure. According to the size of press and mould equipment, the pressure is usually 20 - 1000 tons. The size of the platen is usually 8 inches, 2 to 5 feet, 2.There are different degrees of automation in the mold release after charging and curing. The most modern hydraulic press is often used. Previous simple systems include temperature control, pressure control, stop pressure control, and time control. Modern equipment is controlled by more advanced microprocessors. For thinner products, a heating cylinder or belt heater can be used in the plate. For deeper parts, use a cylindrical electric heater, steam heating or hot oil heating system. There are several kinds of pressure heating system used in plastic with uniform temperature steam heating mode, but the heating temperature limit below 350 DEG F; barrel heating or other heating (heating coil, heating etc.) is relatively clean, easy to maintain, with more universal; oil heating, because the heating medium circulation is stable, so the uniform heating. Now there are many new heating methods, hot water heating, similar to hot oil heating, heating medium, one water, one gas combustion, continuous cycle, can provide higher plastic temperature.
- Q: What are the raw materials for composite manhole covers?
- Fiber reinforced thermosetting composite material based on unsaturated polyester resin, also called group molding plastics (DMC), is made by pressing forming technology. It is a new type of environmental friendly power panel.
- Q: What material is SMC? Can it replace ceramics? Can it be made into toilets, basins, urinals and so on?
- SMC composite is Sheet molding compound abbreviation, that is, sheet molding compound. The main raw materials are made up of GF (special yarn), UP (unsaturated resin), low shrinkage additive, MD (filler) and various auxiliaries. It first appeared in Europe in the early 1960s, and developed in the United States and Japan around 1965. At the end of 80s, China introduced advanced SMC production line and production process abroad.
- Q: Who knows what is the process flow of FRP splicing water tank?
- After 48h heating after curing, inspection sheet, in accordance with the specifications required for Hengxin water tank for cutting, weighing, stacked, evenly placed has cleaning and mold heating to 120-140 DEG C, and after a period of time after the opening.
- Q: In recent years, what new materials have come into use in the automotive interior, or in the future?
- LFT is a kind of advanced fiber reinforced lightweight materials in the field, with design, low density, high specific strength, high specific modulus and strong impact resistance and other characteristics, it appears to Aluminum Alloy, fiber reinforced thermoset composites poses huge challenges, and gradually become the mainstream material production of auto parts.LFT Long-Fiber Reinforce is English Thermoplastic, Chinese for long fiber reinforced thermoplastic plastics, used to call the long fiber reinforced thermoplastic composites, it is a kind of advanced fiber reinforced lightweight polymer material field.
- Q: Is the SMC material poisonous?
- This material is very good, non-toxic, give you a link, you refer to, remember to give a adoption Oh!
- Q: What is the difference between a gain fiberglass and an ordinary omnidirectional antenna?
- SMC and its molded products have the following characteristics: light weight, high strength, precise size, good batch quality and zero shrinkage. With a surface level, mechanization, a high degree of automation, applicable to high surface quality requirements, large output, uniform thickness of the product.
- Q: How is glass fiber reinforced plastic water tank made?
- This is really hard to understand, but I was in the five Yi bought water tank, good quality
Send your message to us
SMC Sheet with Strong Fire Resistance/Colorful SMC/SMC FRP Sheet for Construction
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 m²
- Supply Capability:
- 5000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
