Silicone Hose for Automotive OEM
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 PCS
- Supply Capability:
- 50000 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Production description :
Products ID/mm
ID/inch
straight hose 6mm-152mm 0.235''-6''
1 meter silicone hose 6mm-152mm 0.235''-6''
2 meter silicone hose 10mm-76mm 0.4''-3''
straight reducer 25mm-152mm 1''-6''
45 degree/ 45 degree reducer silicone hose 19mm-152mm 0.75''-6''
90 degree/ 90 degree reducer silicone hose 8mm-152mm 0.315''-6''
135 degree silicone hose 38mm-102mm 1.5''-4''
180 degree/U shaped silicone hose 25mm-102mm 1''-4''
Performance Silicone hose:
1)Uses: turbine superchargers and coolants
2)Operative temperature: - 40°c to 220°c ( 428F)
3)Pressure: 0.3 to 2Mpa
4)Standard Color: blue and black
5)Size tolerance: ±0.5mm
6)Nomex/Polyester reinforced: 4-ply(5mm wall)
The developed universal products including: Straight Coupler Hose, Reducer Hose, Hump Coupler Hose & Hump Reducer Hose, 45/90/135/180 degree Elbow & Elbow Reducer Hose, 45/90 degree Hump Elbow & Hump Elbow Reducer Hose, T-Piece Hose, U-Shape Hose, Vacuum hose, Fuel resistent hose, Viton silicone hose,etc, all are in various Inner Diameter sizes.
So for the universal products, please advise the item no. and the I.D, Length or Height that you need, therefore the quotation list will be sent to you accordingly. thank you!
- Q:The car tire two what is the difference? Which one is better? 1) glue inside; 2) prick holes and glue bars into it
- Within the fill, puncture through polishing, inside paste film, using film glue bonding force and tire pressure pressure so that the film is stable, disadvantage is again patched tire leakage after the tire pressure loss support within the patch will be out for tire fold extrusion, and fill the need to borrow machine tools cannot use, field conditions.
- Q:What are the applications of rubber airbags in the automotive field?
- Sealing system is mainly used to prevent leakage of liquid or other materials, including O ring, rotary shaft oil seal, sealing strip, dust cover, flat gasket and so on. Seals are sometimes made of metal, plastic, or fabric, but more of them are made of rubber. In the early 80s of last century, the United States successfully developed PTFE composite oil seal, successfully solved the problem of engine oil leakage, water leakage, and at the same time greatly improved the technical performance of the car. When the engine and transmission system uses oil series lubricants, the sealing material is usually made of butyl rubber (NBR), acrylic rubber (ACM), silicone rubber (VMQ) or fluorine rubber (FPM).Engine oil requires long life, low viscosity (oil saving), smooth lubrication at high temperature, so engine oil usually contains a variety of additives. Long time soaking HNBR, FPM and ACM at high temperature in an additive containing oil, can maintain high compressive strength. The hydrogenation of chloroprene rubber (HNBR) in which several rubber additives on resistance is the best, at the same time by Ding Xiangjiao (HNBR) heat resistance, oil resistance, aging resistance, is rubber products, currently used in high performance auto parts have been widely. For a long time, the automotive industry has been using NBR and cork rubber to make gaskets for engines, but now uses ACM and VMQ as the main material to satisfy the requirements of heat resistance, sealing capacity and compression durability.The fuel pump diaphragm is a typical fuel pump structure in the carburetor system. The diaphragm has to withstand the thermal impact of the engine and therefore requires not only good durability in the gasoline but also high heat resistance. Because of the need for oxidation resistant gasoline, NBR, HNBR and FPM are available for shock absorbers, insulators, and oil seals in the case of seals. As to which material to choose, the temperature depends on the specific temperature.
- Q:What are the advantages and disadvantages of automobile shock absorber installation?
- Shock absorber - this kind of thing is called a damping rubber ring in general. The main function is that the car bends and reduces the roll of the car. Some students mistakenly believe that adding this stuff will improve the riding comfort of the car, and that's a big mistake!
- Q:Want to know how the rubber skid on the bus handle is set up?
- It is soft and elastic. Heating (125 degrees) will shrink, widely used in a variety of wiring harness, solder joints, inductors insulation protection, metal pipes, rods rust prevention, corrosion protection.
- Q:How are rubber tires made of model cars?
- Two kinds of rubber material, one is butyl rubber, and one is natural rubber, the production process is to start the mold, and then put into a good rubber molding, I have a friend to do this
- Q:Does the fuel pipe for automobiles belong to rubber products?
- If it is gasoline, remove the oil supply rack and the metal oil pipe on the chassis, to connect the need for some of the arc, are rubber material pipe.
- Q:Want to buy a car with anti-skid pad, silicone rubber and PVC foam material, which three kinds of the most environmentally friendly?
- Hello, silicone is the most environmentally friendly of these three materials.
- Q:What is the cause of the scaly skin on the tyres?
- Tires appear cracks, peeling phenomenon is often caused by a reason, that is, in the production process, the proportion of natural rubber caused by insufficient.
- Q:There is a smell of rubber and plastic in the inner room. What's wrong with it?
- In the process of traffic if you smell the special smell of a non-metallic material burning, the paste taste in with a burnt smell. Most of this is due to the burning or overheating of the clutch friction plate.
- Q:Where does the car use the most rubber parts?
- The top man in the car right, the role of the general rubber, sealing, dustproof, buffering, wear, as long as these effects can be used in rubber parts.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Silicone Hose for Automotive OEM
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 PCS
- Supply Capability:
- 50000 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords