Silicone Hose for Automotive OEM Red and Blue
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 PCS
- Supply Capability:
- 50000 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Production description :
Products ID/mm
ID/inch
straight hose 6mm-152mm 0.235''-6''
1 meter silicone hose 6mm-152mm 0.235''-6''
2 meter silicone hose 10mm-76mm 0.4''-3''
straight reducer 25mm-152mm 1''-6''
45 degree/ 45 degree reducer silicone hose 19mm-152mm 0.75''-6''
90 degree/ 90 degree reducer silicone hose 8mm-152mm 0.315''-6''
135 degree silicone hose 38mm-102mm 1.5''-4''
180 degree/U shaped silicone hose 25mm-102mm 1''-4''
Performance Silicone hose:
1)Uses: turbine superchargers and coolants
2)Operative temperature: - 40°c to 220°c ( 428F)
3)Pressure: 0.3 to 2Mpa
4)Standard Color: blue and black
5)Size tolerance: ±0.5mm
6)Nomex/Polyester reinforced: 4-ply(5mm wall)
Material: 100% pure silicone rubber+high quality polyester
Application: turbo boost/racing/tuning/intercooler/turbo/air intake/wastegate/cooling system
Thickness:4mm--6mm
Ply:3--5
Length:50mm-2000mm
ID:3mm--150mm
Color: red, blue, black, pink, purple, yellow, green, orange, white, transparent and other colors
Working Pressure: 1.2 Mpa
Bursting Pressure: 03~0.9 Mpa
Operating Temperature: -20℃ to ~ + 260 ℃
Quality Quarantee: 5 years
So for the universal products, please advise the item no. and the I.D, Length or Height that you need, therefore the quotation list will be sent to you accordingly. thank you!
- Q: Ask the construction principle, under the action of the ball and dust cover
- The cover is made of thermoplastic elastomer thermoplastic rubber dust, also known as, is a polymer alloy material between rubber and thermoplastic between ball and dust on the axle, when the cover is cracked or damaged when there is dust and grease leakage.
- Q: Who knows what the oil ratio in the car tires is?
- Tire parts are composed of different rubber, in order to achieve the purpose of its application.
- Q: General car ordinary car had a puncture can continue to open it, most can run far?
- Hello! You can get a good solution to the problem. At the same time, you are the lady. The tire is stuck and can not be changed! 1. can continue to exercise depends on how you use the tyres, if you use the general tire or ordinary tire, with no gas is not to leave, if you do not remove a puncture of the tire is not discouraged, can exercise to the nearest garage! 2. in order to avoid similar things happen, you can choose anti burst or bullet proof tires, the price may be a little higher, but absolutely not firm, even if the bar will own inflatable, can ensure you successfully reach the destination! But this kind of tires have a common disadvantage is the relatively heavy tire is relatively hard, driving up will feel uncomfortable, but more or less will increase fuel consumption, but also enhance the car's grip, so as to improve the safety factor of the car! Also, after your tire has been inserted, if you make the first supplement, it is recommended to change the tire to the rear wheel, so it will be safer to run at high speed!
- Q: Where does the rubber from the car come from?
- There is a tree called a rubber tree, a white liquid, that is the basic material of bananas. China is relatively small, and Asia is mostly produced in countries near the equator.
- Q: There is a smell of rubber and plastic in the inner room. What's wrong with it?
- If you smell this kind of smell, it must be alert, and this situation is mostly related to electrical wiring, electrical wiring found overheating, we must stop immediately to find out why. Don't look at the wire burning taste is not big, but if not promptly treated, may cause the circuit completely damaged, even the car engine cylinder combustion, the consequence is serious.
- Q: How to maintain the door seal?
- Sealing strip maintenance is relatively simple, in cleaning the car after the end of the car, do not forget to seal a layer of high permeability coating agent, so that the seal can prevent aging. Since the seal is easy to fill with sand and some dust, clean the dust regularly with a brush.
- Q: How to properly clean automobile engines, rubber and tires and other parts?
- The procedures for cleaning and beautifying the engine are as follows:(1) before scrubbing, remove dust or fine sand with a brush or jet gun.(2) be sure to spray detergent onto a sponge or brush before wiping it.(3) the black resin parts can be cleaned and protected by plastic parts, so that the wax can be renewed. If it is sprayed directly, it may be sprayed into the place where it should not be sprayed.
- Q: What kind of material should be used for the sealing ring of diesel fuel filter, what specific requirements should be made?
- Oil resistant rubber with low coefficient of thermal deformationHigh machining accuracy, good surface finishFor example, currently the best Duffett filter sealing ring, all imported from Japan
- Q: How are the car tyres made?
- The car the whole tire is not too humble, but tire for vehicles, like shoes for people, its importance is absolutely not. We understand the tire production process, help to enhance your Goodyear brand trust. Process 1: dense process, refining process is to carbon black, natural / synthetic rubber, oil, additives, accelerators and other raw materials mixed together, in the mixer for processing, the production of "glue" process. All raw materials must be tested before entering the mixer and can be used after being released. The weight of each mixer is about 250 kilograms. Each rubber component used in the tire is of a specific property. The composition of the rubber depends on the performance requirements of the tire. At the same time, the change of the composition of the rubber depends on the needs of the manufacturers and the market. These requirements mainly come from traction, driving performance, road conditions and the requirements of the tires themselves.
- Q: What is the cause of the scaly skin on the tyres?
- Tires appear cracks, peeling phenomenon is often caused by a reason, that is, in the production process, the proportion of natural rubber caused by insufficient.
Send your message to us
Silicone Hose for Automotive OEM Red and Blue
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 PCS
- Supply Capability:
- 50000 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
