Rubber Hose 2SN DN32

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

Q: What should I pay attention to when rubber tube is in storage?: Storage should be as follows: (1) should be stored in a ventilated and dry environment, the relative humidity of the air is 50% ~ 80%. (2) should be stored in non corrosive media, and away from the heat source, the temperature is about 5 degrees Celsius conditions. (3) packing should be kept as far as possible without box stacking.

Q: The function of rubber joint?: After installation, the transverse, axial and angular displacement of the pipe vibration can be absorbed. The pipe is not concentric and the flange is not parallel

Q: What kind of material is medical rubber tube?: Silicone rubber, of course, is environmentally friendly, non-toxic, harmless, such as high-pressure sealing ring in the pot. First of all, to the human body non-toxic first.

Q: How to detect the reliability of rubber hose: Hydraulic test verification pressure test: Test hose and assembly under verification pressure, continue 30s-60s, whether to produce leakage, deformation and damage. Compression deformation test: keep 1 minutes under the specified pressure (work pressure, verification pressure or other pressure below the proof pressure), measure the length and diameter of the hose, twist angle and bend. Bursting pressure test: Determination of the pressure at which the hose burst during the specified step-up rate. Leak test: save 5min at 70% of the minimum blast pressure, and check again and again for leaks or damage. Due to the fact that water is often used in tests, the pressure and leakage pressure at normal temperatures may be slightly lower at normal temperatures.

Q: What are the types of cable metal hose connections?: It is mainly used for connecting the box and hose in place. Open the box in the box and plug into the joint. The external thread joint is fixed with the lock.

Q: Which is safer for stainless steel bellows and rubber tubes for gas pipelines?: The stainless steel bellows and the quick fitting joint connection way mostly uses the end face seal, may avoid the thread seal to be lax strictly the leakage, compared with the traditional installment, its leakage probability will reduce greatly.

Q: What are the methods of sterilizing rubber hoses and Perspex?: The rubber tube is directly into the steam sterilizer. After a few cracks, throw them away and use the new ones.

Q: Can high speed air flow through a rubber tube and produce static electricity?: To solve this problem, I suggest you do not focus on the voltage level, but focus on how to eliminate static electricity. For example, choose a low resistivity rubber material to ground and control the airflow humidity (if possible).If you really need to accurately grasp the size of the voltage caused by static electricity, and there is no reference to the literature, you may as well begin to study the experiment.

Q: Method for connecting glass tube and rubber tube: Just one end of the glass, wet with water, and then rotate hard

Q: What are the rubber pipe joints perfectly joined to the pipe fittings?: But Hong Sheng rubber hose connector is the main performance of good elasticity, the best damping effect, it is this performance can make the perfect combination of equipment and pipe

Send your message to us

*Email

*TEL

*Quantity

*Unit