Rubber Hose 4SH DN16

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

Q: What is the function between the rubber pipe joint and the installing pipe?: The action of the rubber pipe joint on the installation of pipes:1. Small size, light weight, good elasticity, easy installation and maintenance.2. After installation, the transverse, axial and angular displacement of the pipe vibration can be absorbed. The pipe is not concentric and the flange is not parallel.3 、 after installation, it can reduce the noise caused by vibration of pipes, pumps and so on, and has strong vibration absorption ability.

Q: SolidWorks how do you put rubber hose on the iron pipe?: This is to be made into an assembly. First, parts, iron pipes and rubber pipes are made separately, and then the assembly is made to fit together.

Q: Diameter 127mm steel pipe, and diameter 127mm rubber hose how to connect?: According to GB1187, the rubber tube with an inner diameter of 127 has the maximum working pressure of 0.7MPa. The internal diameter tolerance is 2, and the outer diameter of the steel pipe is 127. If the purchase is appropriate, it should be sheathed, but the pipe factory is always taking negative tolerances.

Q: Method for inserting glass tube into rubber tube when assembling instrument: In the pipeline connection, the rubber tube and the plastic pipe are commonly used for the glass tube sleeve connection. Because the caliber of the glass tube is different, the sleeve connection method is different.The connection of the glass with the outer diameter can be connected by a rubber tube, and the inner diameter of the rubber tube shall be slightly smaller than the outer diameter of the glass tube, and the glass tube can be lubricated with water or soap (not oily lubricant) when connected.

Q: My company does high-quality rubber tube, all of the core method, and why use EPDM to do the inner tube, it is difficult to take off the core, please point out! What's the reason?: The core needs to be removed, and if it is too long, the mandrel can be divided into two sections and separated from the 2 sides

Q: How to remove hose odor?: The hose structure is usually divided into: inner layer, outer layer and skeleton layer (or middle layer). The inner layer directly bears the abrasion and erosion of the conveying medium; the outer rubber layer protects the inner part of the hose from the damage and erosion of the external environment; the skeleton layer is the pressure bearing layer of the rubber tube, and gives the strength and rigidity of the pipe body. The working pressure of the hose depends on the material and structure of the skeleton.

Q: What is the rubber sleeve flange connection sleeve?: Ram direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle valve flange. Gate has two sealing surface, the most commonly used mode gate valve of the two sealing surface to form a wedge, wedge angle with valve parameters vary, usually 50, medium temperature is not high when 2 degrees 52'. Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate.

Q: What kind of material is the rubber tube with acid, alkali and high temperature resistance made of?: To acid, but also high temperature resistant material, only silica gel can do. Silica gel has a high temperature resistant material, can be used at 300 degrees high temperature for a long time, instant high temperature can reach 350 degrees. It's Jiao Jiao in the rubber hose.

Q: Why should the water stop strip be joined by heat instead of superposition?: Thermal connection is the safest and most reliable method of joint treatment, but it has certain requirements for technology.

Q: What are the types of metal hose couplings?: DPJ external threaded end metal hose joint is an extension of JB/GQ 0552, /83, D95-5 metal joint;The metal joint is made of zinc alloy. The surface is zinc plated, frosted or chrome plated. The structure is close, without porosity and high strength. The metal hose is connected reliably and has beautiful appearance;The metal joint is an end connection and a linear connection for connecting the metal hose to the case;Suitable metal hose: JS, JSH, JSB, JSHG;It is recommended to use an inch metal hose joint or a metric thread metal joint;Can be customized a variety of non-standard metal hose joints, special metal joints.

Send your message to us

*Email

*TEL

*Quantity

*Unit