Road Roller Buy Cheap S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: S814C Road Roller
Parameter:
Model | Unit | S814C |
Operating weight | kg | 14000 |
Weight on front drum | kg | 7000 |
Static linear pressure | N/cm | 322 |
Speed range | km/h | |
Speed I | 2.7 | |
Speed II | 4.8 | |
Speed III | 10.5 | |
Theoretical gradeability | % | 30 |
Min. external turning radius | mm | 6800 |
Steering angle | ° | ±30 |
Oscillating angle | ° | ±11 |
Vibration frequency | Hz | 28 |
Nominal amplitude (high/low) | mm | 1.9/0.95 |
Excitation force (high/low amplitude) | kN | 274/137 |
Engine model | SC5D125G2B1 | |
Type | Water cooled, pressurized | Water cooled, pressurized |
Max. power | kW | 92@2200r/min |
Engine oil consumption | g/kW.h | 230 |
Hydraulic oil tank capacity | L | 170 |
Fuel tank capacity | L | 180 |
Advantages:
state-owned company
fortune 500 company
AAcustom
Why choose us?
1 sincre
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the equipment such as tower cranes, produced by CNBM are compliant with the national level quality.
2 professional
Our engineers will at your services 24hours to solve all your tower crane installation and other questions. Our goal is to provide the best professional services.
3 quality
CNBM International’s tower crane have strict quality control, only the best quality products can pass the test.
4speed
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
Inquies FAQ
My dearest friend, if you want to buy our tower cranes, please tell us the following parameters. And we will make the most suitable project for!
1. Building height or tower crane working height.
2. Max load capacity and tip load capacity.
3. Span or jib length
4. Other Special requirements
- Q: I would like to ask, 18T roller layered centimeters, compaction is the most appropriate?
- If it refers to single steel wheel vibratory roller, cement stabilized base or cushion construction: the maximum delamination shall not exceed 20cm.
- Q: How many tons of rollers are needed for highway engineering?
- At present, 30 tons of construction is not much. At present, the market share is the highest proportion of more than 16 tons of overweight roller. Take the single steel wheel vibratory roller as an example, generally divided into 16 tons, 18 tons, 20 tons, 22 tons and 26 tons, the ZOOMLION still has 25 tons and 27 tons, and from the engineering point of view, it has been able to meet the needs of construction work, five. For users, the higher the tonnage, the higher the price, the more oil consumption, the purchase costs and cost of use also increased accordingly. Now, the largest tonnage of domestic rollers will be 30 tons.
- Q: What is a roller?
- The road belongs to the road equipment in construction machinery category, widely used in Embankment Compaction of highway, railway, airport runway, dam, stadium and other large projects, can crush sand, semi viscous soil, the stability of subgrade soil and asphalt concrete road surface
- Q: Do we have to use rubber wheels? Is there a mandatory rule?The fine-grained AC-13 is ready to let the builders use the rubber wheel, but the builders say the rubber wheel is rarely used. Would I like to know if this is necessary?
- Be sure to use a tire roller. The reasons are as follows:1, according to the current standard "asphalt pavement construction and acceptance specification" (GB 50092-1996) requirements, should use rubber wheel rolling
- Q: Roller clutch does not move, hang not into gear, what is the problem?
- Should be the electronic control gear bar, the pressure is not enough, or power cylinder problems, clutch failure in place, the control sensor will not give the gear signal, of course, can not hang professional roller
- Q: 1. what type of vehicle does the roller belong to?2. can the roller run on the road without work?3. what are the laws and regulations on road vehicles such as rollers?4. a case: a car on the road when the rear end hit a roller inside the car tail, causing casualties, ask how the roller will be responsible? What is the legal basis for the responsibility?
- 1. Roller belongs to construction machinery2, non working conditions should be prohibited on the road (except because of construction transitions)3: according to the regulations on the administration of urban roads (Decree No. 198th of the State Council), twenty-eighth articlesLicense conditions: tracked vehicle, iron wheel carts or overweight, high and long vehicles driving on the roads in the city, shall be the competent administrative department for approval of municipal engineering agree, and in accordance with the traffic police department designated the time and route.
- Q: How can the asphalt be crushed between the road and the road, and the roller will cut the road along the stone
- Be close to the kerb and be careful about rolling, and shall not be too close to the edge.
- Q: What's the use of this roller? What is the difference between a roller and an ordinary roller?
- This is a convex block roller, is adding a layer with a convex block device mounted on the original circular surface of the base, consisting of two semicircle. This roller is mainly used for the compactness of roadbed. In general the main base material is not easy to be smooth when compacting it will be used
- Q: What are the specific types of Compactors? What is the function of each? What is the difference?
- Here I will not say too much! Because Chinese electromechanical data network is quite comprehensive! Pure non handwritten copy and paste to forget to hope you can have a more in-depth understanding of!
- Q: What's the difference between a three wheeled steel cylinder roller and two wheeled steel cylinder roller?
- Three wheeled steel roller: 12t, 12~15t;Tire roller: 12~20t, 20~25t;Vibratory roller: 6T, 14t;Walking type small vibratory roller: 2t;Vibration plate quality: not less than 180kg, the vibration frequency is not less than 3000 /min.
Send your message to us
Road Roller Buy Cheap S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords