Ringlock Scaffolding Aluminum Alloy in Light Weight
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Galvanized Ringlock Scaffold System
1. Introduction:
Ringlock scaffolding, also called Modular Scaffolding and Multidirectional Scaffolding, the junction enables quick and easy connection of load bearing items as well as reinforcing parts to each other with an enormous rigidity.
Ringlock scaffolding is the new generation product of cuplock sacffolding.The buckle part is a disc which diameter 133mm,and thickness 10mm. Scaffold vertical is a tube of D48*3.5mm which material is Q235/Q345B. On the vertical welded many disc every specific distance ,there is 8 holes on the disc,used to jonit the posts. On the bottom of vertical post is a base collar used to connect the scaffolding and the ground. Ledger is made by a tube with two wedge welded on the ends separately.
2. Specification:
Item | Ringlock system | Dimensions(mm) | Weight(KG) | Surface treatment | Remark |
WY001050 | Vertical Φ48.3x3.25mm | 500 | 3.0 | Hot-Dip galvanized | |
WY001100 | 1000 | 5.4 | Hot-Dip galvanized | ||
WY001150 | 1500 | 7.7 | Hot-Dip galvanized | ||
WY001200 | 2000 | 10.0 | Hot-Dip galvanized | ||
WY001250 | 2500 | 12.4 | Hot-Dip galvanized | ||
WY001300 | 3000 | 14.8 | Hot-Dip galvanized | ||
WY001400 | 4000 | 19.3 | Hot-Dip galvanized | ||
WY002023 | Starting Collar | 230 | 1.6 | Hot-Dip galvanized | |
WY002043 | 430 | 2.7 | Hot-Dip galvanized | ||
WY003073 | Ledger Φ48.3x3.25mm | 732 | 3.5 | Hot-Dip galvanized | |
WY003075 | 750 | 3.6 | Hot-Dip galvanized | ||
WY003100 | 1000 | 4.0 | Hot-Dip galvanized | ||
WY003106 | 1065 | 4.1 | Hot-Dip galvanized | ||
WY003109 | 1088 | 4.6 | Hot-Dip galvanized | ||
WY003129 | 1290 | 5.2 | Hot-Dip galvanized | ||
WY003140 | 1400 | 5.3 | Hot-Dip galvanized | ||
WY003150 | 1500 | 5.7 | Hot-Dip galvanized | ||
WY003157 | 1572 | 6.4 | Hot-Dip galvanized | ||
WY003200 | 2000 | 7.6 | Hot-Dip galvanized | ||
WY003207 | 2072 | 8.4 | Hot-Dip galvanized | ||
WY003250 | 2500 | 9.5 | Hot-Dip galvanized | ||
WY003257 | 2572 | 10.0 | Hot-Dip galvanized | ||
WY003300 | 3000 | 11.4 | Hot-Dip galvanized | ||
WY003307 | 3072 | 11.7 | Hot-Dip galvanized |
3. The parts of Ring Lock Scaffold
4. About us:
We are a professonal manufacturer of scaffolding,scaffolding couplers,frames and related products.
We have been in the business for more than 16 years, and all our products are BS 1139 and EN 74 certified, the quality is the best. Our products are very popular in European countries, Australia, North America, Mid-east countries, and South East Asia and some African countries, etc.
5. Our Service:
Inquiry service:
Accept user’s enquiries by all kinds of ways and establish user’s product cognition.Provide all kinds of product data and let customer understand characteristics of product.
Pre-sale service:
Accept inquiry of customers ,confirmation of investment advice of choice of product ,assist the customers to design the workshop
In-sale service:
Sale of product,help customers build the base ,technical training of customers’ workers ,practice of operation ,help to install ,train the operators in the workshop.
After-sale service:
24 hours service of technology inquiry, instant components supply, regularly technical service guidance of maintain,long distance malfunction control.
Unique service:
System up-grade,special design according to the customers’ requirement, mould renew ,supply new technology and products information.
Any questions, plz feel free contact me!
- Q:I Got It On The 16th Of Feb This Year, I'm 14 Year's Old, So Don't Laugh, Okay I Can't Unscrew The Ball Things And How Long Does It Take To Heal Fully? __Ciara-Chemical__
- Thats an awesome piercing, nice job! I'm not laughing about being unable to unscrew it - I have a piercing in my pinna I've never been able to get out - had it for like 6 months. What I will say it that you shouldn't be taking it out yet really anyway. If you wash it in sea-salt and warm water once a day it should be almost totally healed in 8 weeks, which is still about two weeks away if you got it on the 16th Feb. Even then for the first 6 months or so it'll close pretty quickly (not in like an hour or anything, but it could get tighter in as little as 3 or 4 hours), so you should try to leave it in all the time for that 6 month period.
- Q:In the process of high-rise building construction, bowl buckle type steel pipe scaffolding foundation and foundation treatment should meet the requirements
- The foundation and foundation treatment of bowl buckle scaffold should meet the requirements of standard JGJ166.
- Q:Cuplock scaffolding pole bearing capacity in which can be found? Read a lot of calculations are said to check, but also a lot of difference calculated
- You can refer to "construction scaffolding safety technical specifications" JGJ 166-2008
- Q:For my last piercing i think im gona make it worth it and get one of them ^^^ but i just looked on a website that describes them as both of them words i was just wondering are they completely different piercings ? and if so which one would be the better one to get?
- both are built to have supports
- Q:Basically iv had my scaffold for around 2 years, it is completely healed. About six months ago i had to take the single bar out and put two separate bars in, i went to the shop i had it done at and they sold me two clear labret bars, at the time i did not realise that these were much thinner than my normal bar and because after time they became brittle and discoloured i changed them to two metal eyebrow bars as a short term solution, i need some advice on what to do regards changing back to a single scaffold bar, i would like to freely be able to change between a single bar and two bars/hoop, but im sure it would cause too much damage to my ear and too much pain to keep stretching it to a scaffold bar to then let it go down and stretch it again i will be needing a single bar at weekends not in the week, what should i do?
- To return to the bar, you'll need to go to your piercer to have it reinserted using a small taper. Switching it back and forth from a single bar to hoops is absolutely not recommended because the hoops have a curve and will cause the bar to not fit properly because it will change the angle of the piercing, you can use straight barbell studs that are the same gauge as your single bar though without complication.
- Q:Bridge template support bowl button steel scaffolding, you need to set the sweeping rod
- Sweeping rod: part of the scaffolding works, sweeping rod distance from the ground 200mm, connecting the vertical pole of the horizontal rod. Divided into vertical and horizontal sweep rod, play the role of scaffolding stability.
- Q:Normally scaffolding platforms are for climbing working safely at heights more than 2 m and are erected by approved scaffolders and inspected safe for use . so why should one need safety harness a mandatory PPE?I See it as a only a proactive approach but is there a international standard which specifies it as a mandatory ppe?
- Scaffold Harness
- Q:At what height do we need to erect scaffolding?
- Any height you can fall from and get hurt. I would say this would be above say 6 feet or so. Scaffolding is cheap. You can rent it around here for $14 for two weeks.
- Q:Bowl buckle type steel pipe scaffold and full fastener type scaffolding are long what kind of? What is the difference
- Fastener type scaffolding is composed of shelves and fasteners, and the bowl buckle scaffold is made up of the bowl buckle, the lower bowl buckle, cross bar joints, vertical rods, beams and other components, the method of building some differences
- Q:Ok, so I'm getting a industrial/scaffolding piercing tomorrow and I'm just wandering which ear I should get pierced?I sleep on my left ear;I have I side fridge that goes over my right eye.Also I know the right ear is more popular, is there a particular reason for this?Also how much pain should I be expecting?Thankksss..
- i in my opinion might pass with the contacts. Contacts make existence plenty much less complicated than donning glasses. business piercings are notoriously complicated to heal. maximum places will pierce you with the long barbell while truly they should pierce you with 2 separate and shorter barbells with a view to cut back tugging on the jewellery. Plus, your hair with all its oils/hair products gets in it, and it particularly is cartilage, that's consistently complicated to pierce and heal. maximum individuals i be conscious of that have this piercing have grotesque hypertrophic scarring to pass with it. So I say, get your contacts now, wait and get a piercing later.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Ringlock Scaffolding Aluminum Alloy in Light Weight
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
