Resin High Performance Marine Resin Best Seller
- Ref Price:
-
$1.00 - 8.00
/ kg
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 2000kg kg
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product description:
Its other properties are similar to those of epoxy resins. Certain applications require only a thin coating of fiberglass adhesive for protection.
One common variety is polyester resin fiberglass, a liquid resin polymerized into a solid, and resistant to most solvents. Fiberglass can be laminated from the epoxy resin, crafted into glass-reinforced plastic structures, glass wool, or chopped strand mats of randomly arranged short fibers.
Specifications :
Appearance | liquid |
Acid value mgKOH/g | 16.0~24.0 |
Viscosity 25℃,Pa·s | 0.25~0.35 |
Gel time 25℃,min | 15.0~20.0 |
Solid content | 62.0~68.0 |
Application :
Pre-accelerated, low viscosity, good process performance, good wet-out with glass fibers, low peak exotherm, low shrinkage,
Lloyd's registered for marine use; suitable for RTM or Vacuum infusion process
Features :
Miscible with functionalized solution vinyl resins;
FDA approved for food contact applications;
Package&Storage :
Package:200kg or 18kg clean and dry iron drum;
FAQ:
1.What is the delivery time ?
15days after receiving the deposit
2.Are you a trading company or factory.
We are factory,and we have more than 10 years of experience.
- Q:What is resin sand casting, what is called coated sand casting?What are the advantages and what are they used for?
- In front of molding sand on the surface has been covered with a layer of solid resin sand, sand core called coated sand, also known as shell mold (core) sand. It is one of the earliest thermosetting resin sand, by the German Cronin (CRONING), invented in 1944. The process is a powder heat thermosetting phenolic resin and sand mechanical mixing, heating and curing. It has developed into a thermoplastic phenolic resin and curing agent (such as Urotropine) and lubricant (such as calcium stearate) prepared by film coating process of sand,
- Q:wats the different between fable and fable:the lost chapter????pls giv me info bout tis two games too..
- You can connect PVC pipe without primer if you clean it well, but don't use any glue other than pvc if you expect the joint to have any strength.
- Q:Are the suits that firefighters wear fire resist?
- click on the subcategory in list at top of page (about 2/3 of the way down) called IN PERMANENT CELLS to at least see some suppliers for pendant trays, cabachon settings, etc, etc. My Jewelry page (under J in the alphabetical nav. bar) should also have links for regular online jewlery suppliers like Fire Mountain Gems, etc. HTH, Diane B.
- Q:do you think it was fair that connor the crusher deserves to be in the wwe hall of fame?
- (click on the category about 3/4 of the way down list at top of page called *Softer-Setting Epoxy Resins* you want the 2-part ones) HTH, Diane B.
- Q:What's the difference between a macroporous resin and a polyamide resin?
- According to its polarity and the selected monomer molecular structure:(1) non-polar macroporous resin, styrene, two vinyl benzene polymer, also known as aromatic adsorbent (such as HPD-100, D-101, etc.)(2) medium polarity macroporous resin polyacrylate polymer, using multifunctional group methacrylate as cross linking agent, also called aliphatic adsorbent(3) polar macroporous resins contain sulfur and oxygen and amide groups, such as acrylamide(4) strongly polar macroporous resins, such as nitrogen oxides, contain nitrogen and oxygen groups
- Q:Should I drive in the snow with normal tires?
- Assuming we're talking about a hardened resin matrix (Polyurethane or Acrylic), you would be better off using a cutting disk radial saw. Anything else would likely cause the statue to crack. For the drill, use the same type of bit as you would use for metal, but at a slower RPM. Ideally, you would also put masking tape over the area you'll be sinking your bit prior to drilling. Remember, if something doesn't feel like it's going right, it probably isn't and the smart thing to do is stop, rethink your plan, then re-engage the project. Good luck!
- Q:What do Africans wear when there mining and farming?
- *Just a hint. *Acrylonitrile-butadiene-styrene (ABS) resins consist of a styrene-acrylonitrile copolymer matrix and a styrene-butadiene copolymer dispersed rubber phase. These are engineering plastics, with better solvent and high temperature resistance than impact polystyrenes. Optimum properties require grafting between the matrix and dispersed phases. For further information visit the source link.
- Q:What are the resins?
- Resin is the main raw materials for the manufacture of plastics, paint is also used the system (the main film-forming material, coating such as alkyd resin, acrylic resin, synthetic fatty acid resin, the resin in the Yangtze River Delta and Pearl River Delta are also relatively strong in the paint industry, such as Changxin chemical, Nuplex resin, three resin, Ying DSM syntech resins), adhesives, insulating material, synthetic resin in industrial production, is widely used in separation and purification of impurities in liquid, with macroporous adsorption resin, ion exchange resin, and some special resin.
- Q:Other then a bat, a glove and cleats? It's my first time trying out for a team and I don't want to mess anything up! Also does anyone have any tips? I'm really nervous about trying out!
- No, but I know where you can get some fireproof gloves for free,
- Q:I would like to ask accessories for the use of diamonds, resin drilling, acrylic drill in the end how to distinguish? Are they different in price?
- From the analysis of the brightness of the new drilling, respectively produced Tianpeng diamond, acrylic diamond and diamond resin together, compare the brightness, the brightest is certainly a glass drill, followed by resin that is drilling, the dark is acrylic diamond.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Resin High Performance Marine Resin Best Seller
- Ref Price:
-
$1.00 - 8.00
/ kg
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 2000kg kg
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
